|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH OSSTEST v7 02/15] distros: add support for installing Debian PV guests via d-i, flight and jobs
This patch introduces ts-debian-di-install which can install Debian
from a netboot (PXE) debian installer image. By default it installs
from the d-i image used by osstest (using the special Xen PV guest
enabled flavour where necessary) but it can also fetch the kernel and
ramdisk from URLs specified in runvars. The resulting guests boot the
distro kernel using pygrub (pvgrub will follow).
The distros flights differ substantially from the existing flights.
Introduce make-distros-flight using the functionality previously
refactored into mfi-common. The new flight tests all versions of
Debian from Squeeze onward as an amd64, i386 and armhf guests (armhf
from Jessie onwards only) using the usual smoke tests.
Test names are suffixed -pygrub pending the addition of pvgrub
variants in a future commit.
Add the new cases to sg-run-job
Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
---
v7: Use {Guest}_suite as runvar. Also use $suite not $dist in
make-distros-flight for consistency.
Switch to a flight per Debian suite model rather than one
enourmous flight.
Switch to constructing the URLs in make-distros-flight
v6: Only apply -xen suffix to x86 images when doing a netboot using
the osstest version of d-i, since that is the only arch where we
create such files, other arches can use the bare names.
Use the guest $arch not the host $r{arch} when finding the
kernel+initrd to use for d-i install using the osstest d-i.
v4: use guest create
v3: $BUILD_LVEXTEND_MAX now handled in mfi-common
Consolidate setting of ruvars
Include $flight and $job in tmpdir name
Use Osstest::Debian::di_installcmdline_core
Document the usage of get_host_property on a guest object
Correct ARM netboot paths
Include bootloader in test name
Should include -pv too?
console= repetition for Jessie onwards.
Wait for up to an hour for the install. I'd seen timeouts right at
the end of the install with the previous value
---
Osstest/TestSupport.pm | 3 +
make-distros-flight | 126 ++++++++++++++++++++++++++++++++++++++
sg-run-job | 11 ++++
ts-debian-di-install | 161 +++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 301 insertions(+)
create mode 100755 make-distros-flight
create mode 100755 ts-debian-di-install
diff --git a/Osstest/TestSupport.pm b/Osstest/TestSupport.pm
index d84ca51..1b29445 100644
--- a/Osstest/TestSupport.pm
+++ b/Osstest/TestSupport.pm
@@ -934,8 +934,11 @@ sub propname_massage ($) {
return $prop;
}
+# It is fine to call this on a guest object too, in which case it will
+# always return $defval.
sub get_host_property ($$;$) {
my ($ho, $prop, $defval) = @_;
+ return $defval unless $ho->{Properties};
my $val = $ho->{Properties}{propname_massage($prop)};
return defined($val) ? $val : $defval;
}
diff --git a/make-distros-flight b/make-distros-flight
new file mode 100755
index 0000000..586737c
--- /dev/null
+++ b/make-distros-flight
@@ -0,0 +1,126 @@
+#!/bin/bash
+
+# This is part of "osstest", an automated testing framework for Xen.
+# Copyright (C) 2009-2013 Citrix Inc.
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU Affero General Public License for more details.
+#
+# You should have received a copy of the GNU Affero General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+
+set -e
+
+branch=$1
+xenbranch=$2
+blessing=$3
+buildflight=$4
+
+flight=`./cs-flight-create $blessing $branch`
+
+. cri-common
+. ap-common
+. mfi-common
+
+defsuite=`getconfig DebianSuite`
+defguestsuite=`getconfig GuestDebianSuite`
+
+case $branch in
+ distros-debian-*) debian_suite=${branch#distros-debian-} ;;
+ *) echo $branch >&2; exit 1 ;;
+esac
+
+if [ x$buildflight = x ]; then
+
+ WANT_XEND=false REVISION_LINUX_OLD=disable
+
+ create_build_jobs
+
+else
+
+ bfi=$buildflight.
+
+fi
+
+job_create_test_filter_callback () {
+ if [ "$xenarch" = "i386" ]; then return 1; fi
+ return 0
+}
+
+test_matrix_branch_filter_callback () {
+ :
+}
+
+test_do_one_netboot () {
+ local diurl=
+
+ if [ x$gsuite = xsnapshot ] ; then
+ diurl="http://d-i.debian.org/daily-images/$domU/daily/netboot";
+ gsuite=sid
+ gver=daily
+ else
+ local mirror="http://`getconfig DebianMirrorHost`/`getconfig
DebianMirrorSubpath`"
+ diurl="$mirror/dists/$gsuite/main/installer-$domU/current/images/netboot"
+ gver=$gsuite
+ fi
+
+ case ${domU}_${gsuite} in
+ armhf_squeeze) return;; # No armhf in Squeeze
+ armhf_wheezy) return;; # No armhf guest support in Wheezy
+ *) ;;
+ esac
+
+ case $domU in
+ i386|amd64)
+ diurl="$diurl/xen";;
+ arm64)
+ diurl="$diurl/debian-installer/arm64";;
+ esac
+
+ job_create_test \
+ test-$xenarch$kern-$dom0arch-$domU-$gver-netboot-pygrub \
+ test-debian-di xl $xenarch $dom0arch \
+ kernbuildjob=${bfi}build-$dom0arch-$kernbuild \
+ debian_arch=$domU \
+ debian_suite=$gsuite \
+ debian_method=netboot \
+ debian_netboot_kernel="$diurl/vmlinuz" \
+ debian_netboot_ramdisk="$diurl/initrd.gz" \
+ all_hostflags=$most_hostflags
+}
+
+test_matrix_do_one () {
+ case ${xenarch} in
+ amd64) domUarches="amd64 i386";;
+ armhf) domUarches="armhf";;
+ esac
+
+ for domU in $domUarches ; do
+
+ if [ -n $debian_suite ] ; then
+ gsuite=$debian_suite
+
+ test_do_one_netboot
+
+ fi
+
+ done
+}
+
+test_matrix_iterate
+
+echo $flight
+
+# Local variables:
+# mode: sh
+# sh-basic-offset: 2
+# indent-tabs-mode: nil
+# End:
diff --git a/sg-run-job b/sg-run-job
index d53fd83..bba52ed 100755
--- a/sg-run-job
+++ b/sg-run-job
@@ -258,6 +258,17 @@ proc run-job/test-debian {} {
test-guest debian
}
+proc install-guest-debian-di {} {
+ run-ts . = ts-debian-di-install
+ run-ts . = ts-guest-start + debian
+}
+
+proc need-hosts/test-debian-di {} { return host }
+proc run-job/test-debian-di {} {
+ install-guest-debian-di
+ test-guest debian
+}
+
proc need-hosts/test-freebsd {} { return host }
proc run-job/test-freebsd {} {
run-ts . = ts-freebsd-install
diff --git a/ts-debian-di-install b/ts-debian-di-install
new file mode 100755
index 0000000..ed3c348
--- /dev/null
+++ b/ts-debian-di-install
@@ -0,0 +1,161 @@
+#!/usr/bin/perl -w
+# This is part of "osstest", an automated testing framework for Xen.
+# Copyright (C) 2009-2013 Citrix Inc.
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU Affero General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU Affero General Public License for more details.
+#
+# You should have received a copy of the GNU Affero General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+use strict qw(vars);
+use DBI;
+use Osstest;
+use Osstest::Debian;
+use Osstest::TestSupport;
+
+tsreadconfig();
+
+our ($whhost,$gn) = @ARGV;
+$whhost ||= 'host';
+$gn ||= 'debian';
+
+our $ho= selecthost($whhost);
+
+our $ram_mb= 512;
+our $disk_mb= 10000;
+
+our $guesthost= "$gn.guest.osstest";
+our $gho;
+
+sub prep () {
+ target_install_packages_norec($ho, qw(lvm2));
+
+ $gho= prepareguest($ho, $gn, $guesthost, 22,
+ $disk_mb, 40);
+
+ prepareguest_part_lvmdisk($ho, $gho, $disk_mb);
+
+ target_cmd_root($ho, "umount $gho->{Lvdev} ||:");
+}
+
+sub setup_netboot($$$)
+{
+ my ($didir, $arch, $suite) = @_;
+
+ my ($kernel,$ramdisk);
+
+ if ( $r{ "$gho->{Guest}_netboot_kernel" } &&
+ $r{ "$gho->{Guest}_netboot_ramdisk" } ) {
+ target_fetchurl($ho, $r{ "$gho->{Guest}_netboot_kernel" },
+ "$didir/kernel_${suite}_${arch}");
+ target_fetchurl($ho, $r{ "$gho->{Guest}_netboot_ramdisk" },
+ "$didir/ramdisk_${suite}_${arch}");
+ } else {
+ # Both or neither must be specified
+ die if $r{ "$gho->{Guest}_netboot_kernel" }
+ || $r{ "$gho->{Guest}_netboot_ramdisk" };
+
+ my $di_path =
$c{TftpPath}.'/'.$ho->{Tftp}{DiBase}.'/'.${arch}.'/'.$c{TftpDiVersion}.'-'.$ho->{Suite};
+
+ my $suffix = '';
+ $suffix .= "-xen" if ${arch} =~ m/amd64|i386/;
+ $kernel = "$di_path/vmlinuz$suffix";
+ $ramdisk = "$di_path/initrd.gz$suffix";
+
+ target_putfile_root($ho, 60, $kernel, "$didir/kernel_${suite}_${arch}");
+ target_putfile_root($ho, 60, $ramdisk,
"$didir/ramdisk_${suite}_${arch}");
+
+ store_runvar("$gho->{Guest}_netboot_kernel", $kernel);
+ store_runvar("$gho->{Guest}_netboot_ramdisk", $ramdisk);
+ }
+
+ return <<END;
+kernel = "$didir/kernel_${suite}_${arch}"
+ramdisk = "$didir/ramdisk_${suite}_${arch}"
+END
+}
+
+sub ginstall () {
+ my $arch= $r{"$gho->{Guest}_arch"};
+ my $method= $r{"$gho->{Guest}_method"};
+
+ my $tmpdir= "/root/$flight-$job-di";
+ target_cmd_root($ho, <<END);
+rm -rf $tmpdir
+mkdir $tmpdir
+END
+
+ my ($method_cfg, $ps_url, $extra_disk);
+
+ if ( $method eq "netboot" )
+ {
+ my $suite= $r{"$gho->{Guest}_suite"};
+ logm("$method $suite/$arch");
+
+ $method_cfg = setup_netboot($tmpdir, $arch, $suite);
+
+ $ps_url = preseed_create_guest($gho, '', Suite=>$suite);
+
+ $extra_disk = "";
+ }
+ else
+ {
+ die "$method";
+ }
+
+ my @cmdline = ();
+ push @cmdline, "debian-installer/exit/always_halt=true";
+ push @cmdline, "domain=$c{TestHostDomain}";
+ push @cmdline, "console=hvc0";
+ push @cmdline, di_installcmdline_core($gho, $ps_url);
+ push @cmdline, "--";
+ # See https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=762007 for
+ # why this is repeated.
+ push @cmdline, "console=hvc0";
+
+ my $cmdline = join(" ", @cmdline);
+
+ my %install_xopts = (
+ OnPowerOff => "preserve"
+ );
+
+ prepareguest_part_xencfg($ho, $gho, $ram_mb, \%install_xopts, <<END);
+$method_cfg
+extra = "$cmdline"
+#
+disk = [
+ $extra_disk 'phy:$gho->{Lvdev},xvda,w'
+ ]
+END
+
+ guest_create($gho);
+
+ guest_checkrunning($ho, $gho) or die "$gho->{Name} not running";
+
+ guest_await_shutdown($ho,$gho,3600);
+ guest_destroy($gho);
+
+ my $blcfg = <<END;
+bootloader = "pygrub"
+END
+
+ prepareguest_part_xencfg($ho, $gho, $ram_mb, {}, <<END);
+$blcfg
+#
+disk = [
+ 'phy:$gho->{Lvdev},xvda,w'
+ ]
+END
+ return;
+}
+
+prep();
+ginstall();
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |