|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [linux-linus test] 57367: trouble: blocked/broken/fail/pass
flight 57367 linux-linus real [real] http://logs.test-lab.xenproject.org/osstest/logs/57367/ Failures and problems with tests :-( Tests which did not succeed and are blocking, including tests which could not be run: build-armhf 3 host-install(3) broken REGR. vs. 57123 Regressions which are regarded as allowable (not blocking): test-amd64-i386-libvirt 11 guest-start fail like 57123 test-amd64-amd64-libvirt 11 guest-start fail like 57123 test-amd64-i386-freebsd10-amd64 9 freebsd-install fail like 57123 test-amd64-i386-freebsd10-i386 9 freebsd-install fail like 57123 test-amd64-amd64-xl-qemuu-win7-amd64 16 guest-stop fail like 57123 test-amd64-i386-xl-qemuu-win7-amd64 16 guest-stop fail like 57123 Tests which did not succeed, but are not blocking: test-armhf-armhf-xl 1 build-check(1) blocked n/a test-armhf-armhf-xl-sedf 1 build-check(1) blocked n/a test-armhf-armhf-xl-credit2 1 build-check(1) blocked n/a test-armhf-armhf-xl-cubietruck 1 build-check(1) blocked n/a test-armhf-armhf-libvirt 1 build-check(1) blocked n/a test-armhf-armhf-xl-multivcpu 1 build-check(1) blocked n/a test-armhf-armhf-libvirt-xsm 1 build-check(1) blocked n/a test-armhf-armhf-xl-sedf-pin 1 build-check(1) blocked n/a build-armhf-libvirt 1 build-check(1) blocked n/a test-armhf-armhf-xl-arndale 1 build-check(1) blocked n/a test-amd64-amd64-xl-qemut-debianhvm-amd64-xsm 9 debian-hvm-install fail never pass test-amd64-i386-xl-qemut-debianhvm-amd64-xsm 9 debian-hvm-install fail never pass test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm 9 debian-hvm-install fail never pass test-amd64-i386-libvirt-xsm 11 guest-start fail never pass test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm 9 debian-hvm-install fail never pass test-amd64-amd64-xl-pvh-intel 11 guest-start fail never pass test-amd64-amd64-xl-xsm 11 guest-start fail never pass test-amd64-amd64-xl-pvh-amd 11 guest-start fail never pass test-amd64-amd64-libvirt-xsm 11 guest-start fail never pass test-amd64-i386-xl-xsm 11 guest-start fail never pass test-armhf-armhf-xl-xsm 11 guest-start fail never pass test-amd64-amd64-xl-qemut-win7-amd64 16 guest-stop fail never pass test-amd64-i386-xl-qemut-win7-amd64 16 guest-stop fail never pass version targeted for testing: linux a8b253b9f253c05e5e10b829b8d1fb24556f4b56 baseline version: linux c5db6a3bdeb72f4238e1faefa4ce4eab7a64baea ------------------------------------------------------------ People who touched revisions under test: Alexey Kardashevskiy <aik@xxxxxxxxx> Carlo Caione <carlo@xxxxxxxxxxxx> Dick Kennedy <dick.kennedy@xxxxxxxxxxxxx> Hannes Reinecke <hare@xxxxxxx> James Bottomley <JBottomley@xxxxxxxx> James Smart <james.smart@xxxxxxxxxxxxx> James Smart <james.smart@xxxxxxxxxx> Jayamohan Kallickal <jayamohan.kallickal@xxxxxxxxxxxxx> Johan Hovold <johan@xxxxxxxxxx> K. Y. Srinivasan <kys@xxxxxxxxxxxxx> Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> Linus Walleij <linus.walleij@xxxxxxxxxx> Mark Hounschell <dmarkh@xxxxxxxxxx> Michael Brunner <mibru@xxxxxx> Michael Brunner <michael.brunner@xxxxxxxxxxx> Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> Minh Tran <minh.tran@xxxxxxxxxxxxx> Minh Tran <minhduc.tran@xxxxxxxxxxxxx> Ray Jui <rjui@xxxxxxxxxxxx> ------------------------------------------------------------ jobs: build-amd64-xsm pass build-armhf-xsm pass build-i386-xsm pass build-amd64 pass build-armhf broken build-i386 pass build-amd64-libvirt pass build-armhf-libvirt blocked build-i386-libvirt pass build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops pass build-amd64-rumpuserxen pass build-i386-rumpuserxen pass test-amd64-amd64-xl pass test-armhf-armhf-xl blocked test-amd64-i386-xl pass test-amd64-amd64-xl-qemut-debianhvm-amd64-xsm fail test-amd64-i386-xl-qemut-debianhvm-amd64-xsm fail test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm fail test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm fail test-amd64-amd64-libvirt-xsm fail test-armhf-armhf-libvirt-xsm blocked test-amd64-i386-libvirt-xsm fail test-amd64-amd64-xl-xsm fail test-armhf-armhf-xl-xsm fail test-amd64-i386-xl-xsm fail test-amd64-amd64-xl-pvh-amd fail test-amd64-i386-qemut-rhel6hvm-amd pass test-amd64-i386-qemuu-rhel6hvm-amd pass test-amd64-amd64-xl-qemut-debianhvm-amd64 pass test-amd64-i386-xl-qemut-debianhvm-amd64 pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-freebsd10-amd64 fail test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass test-amd64-amd64-rumpuserxen-amd64 pass test-amd64-amd64-xl-qemut-win7-amd64 fail test-amd64-i386-xl-qemut-win7-amd64 fail test-amd64-amd64-xl-qemuu-win7-amd64 fail test-amd64-i386-xl-qemuu-win7-amd64 fail test-armhf-armhf-xl-arndale blocked test-amd64-amd64-xl-credit2 pass test-armhf-armhf-xl-credit2 blocked test-armhf-armhf-xl-cubietruck blocked test-amd64-i386-freebsd10-i386 fail test-amd64-i386-rumpuserxen-i386 pass test-amd64-amd64-xl-pvh-intel fail test-amd64-i386-qemut-rhel6hvm-intel pass test-amd64-i386-qemuu-rhel6hvm-intel pass test-amd64-amd64-libvirt fail test-armhf-armhf-libvirt blocked test-amd64-i386-libvirt fail test-amd64-amd64-xl-multivcpu pass test-armhf-armhf-xl-multivcpu blocked test-amd64-amd64-pair pass test-amd64-i386-pair pass test-amd64-amd64-xl-sedf-pin pass test-armhf-armhf-xl-sedf-pin blocked test-amd64-amd64-xl-sedf pass test-armhf-armhf-xl-sedf blocked test-amd64-i386-xl-qemut-winxpsp3-vcpus1 pass test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 pass test-amd64-amd64-xl-qemut-winxpsp3 pass test-amd64-i386-xl-qemut-winxpsp3 pass test-amd64-amd64-xl-qemuu-winxpsp3 pass test-amd64-i386-xl-qemuu-winxpsp3 pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary broken-step build-armhf host-install(3) Not pushing. ------------------------------------------------------------ commit a8b253b9f253c05e5e10b829b8d1fb24556f4b56 Merge: e7db38a 984cffd Author: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> Date: Mon May 25 15:15:54 2015 -0700 Merge tag 'pinctrl-v4.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Here are some three pin control fixes for the v4.1 cycle, all driver-specific. Business as usual and calm as it should be in this portion of the merge window. - IRQ trigger fix for the Intel Cherryview - GPIO-to-pin mapping fix for the Cygnus driver - GPIO-to-pin mapping fix for the Meson8b driver" * tag 'pinctrl-v4.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: Fix gpio/pin mapping for Meson8b pinctrl: cygnus: fixed incorrect GPIO-pin mapping pinctrl: cherryview: Read triggering type from HW if not set when requested commit e7db38a2ef9344d5f0b3df4c4808d638f81cfbd6 Merge: ba155e2 f230e8f Author: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> Date: Mon May 25 15:10:59 2015 -0700 Merge tag 'gpio-v4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here are two GPIO fixes targeted for stable: - a leak in gpiochip_add path destined for stable - a kempld driver bug destined for stable" * tag 'gpio-v4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: gpio-kempld: Fix get_direction return value gpio: fix gpio leak in gpiochip_add error path commit ba155e2d21f6bf05de86a78dbe5bfd8757604a65 Author: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> Date: Sun May 24 18:22:35 2015 -0700 Linux 4.1-rc5 commit 5b13966693c540f6a6a8d708842b3bce35d0fec7 Merge: c5db6a3 3250587 Author: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> Date: Sun May 24 11:15:28 2015 -0700 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of five fixes: Two MAINTAINER email updates (urgent because the non-avagotech emails will start bouncing) an lpfc big endian oops fix, a 256 byte sector hang fix (to eliminate 256 byte sectors) and a storvsc fix which could cause test unit ready failures on bringup" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: Revise lpfc maintainers for Avago Technologies ownership of Emulex MAINTAINERS, be2iscsi: change email domain sd: Disable support for 256 byte/sector disks lpfc: Fix breakage on big endian kernels storvsc: Set the SRB flags correctly when no data transfer is needed commit 984cffdeaeb7ea5a21f49a89f638d84d62d08992 Author: Carlo Caione <carlo@xxxxxxxxxxxx> Date: Sun May 17 17:57:38 2015 +0200 pinctrl: Fix gpio/pin mapping for Meson8b The num_pins field in the struct meson_domain_data must include also the missing pins in the Meson8b SoC, otherwise the GPIO <-> pin mapping is broken on this platform. Avoid also the dinamic allocation for GPIOs. Signed-off-by: Carlo Caione <carlo@xxxxxxxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> commit 75e9143927a893aebad18b79e1bbeff4892c0d35 Author: Ray Jui <rjui@xxxxxxxxxxxx> Date: Wed May 13 17:06:23 2015 -0700 pinctrl: cygnus: fixed incorrect GPIO-pin mapping This patch fixes an incorrect GPIO-to-pin mapping in the Cygnus GPIO driver Signed-off-by: Ray Jui <rjui@xxxxxxxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> commit 32505876c0947a4cecc409dfbef1fc58ced6138d Author: James Smart <james.smart@xxxxxxxxxx> Date: Fri May 15 13:10:58 2015 -0400 MAINTAINERS: Revise lpfc maintainers for Avago Technologies ownership of Emulex The old email addresses will go away very soon. Revising with new addresses. Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxxx> Signed-off-by: James Smart <james.smart@xxxxxxxxxxxxx> Signed-off-by: James Bottomley <JBottomley@xxxxxxxx> commit 4627de932d5528ede89ee3ea84ef6339a906e58d Author: Minh Tran <minhduc.tran@xxxxxxxxxxxxx> Date: Thu May 14 23:16:17 2015 -0700 MAINTAINERS, be2iscsi: change email domain be2iscsi change of ownership from Emulex to Avago Technologies recently. We like to get the following updates in: changed "Emulex" to "Avago Technologies", changed email addresses from "emulex.com" to "avagotech.com", updated MAINTAINER list for be2iscsi driver. Signed-off-by: Minh Tran <minh.tran@xxxxxxxxxxxxx> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@xxxxxxxxxxxxx> Signed-off-by: James Bottomley <JBottomley@xxxxxxxx> commit 74856fbf441929918c49ff262ace9835048e4e6a Author: Mark Hounschell <dmarkh@xxxxxxxxxx> Date: Wed May 13 10:49:09 2015 +0200 sd: Disable support for 256 byte/sector disks 256 bytes per sector support has been broken since 2.6.X, and no-one stepped up to fix this. So disable support for it. Signed-off-by: Mark Hounschell <dmarkh@xxxxxxxxxx> Signed-off-by: Hannes Reinecke <hare@xxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: James Bottomley <JBottomley@xxxxxxxx> commit e6c906dedb8a332ece0e789980eef340fdcd9e20 Author: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> Date: Tue May 12 13:35:37 2015 +0300 pinctrl: cherryview: Read triggering type from HW if not set when requested If a driver does not set interrupt triggering type when it calls request_irq(), it means use the pin as the hardware/firmware has configured it. There are some drivers doing this. One example is drivers/input/serio/i8042.c that requests the interrupt like: error = request_irq(I8042_KBD_IRQ, i8042_interrupt, IRQF_SHARED, "i8042", i8042_platform_device); It assumes the interrupt is already properly configured. This is true in case of interrupts connected to the IO-APIC. However, some Intel Braswell/Cherryview based machines use a GPIO here instead for the internal keyboard controller. This is a problem because even if the pin/interrupt is properly configured, the irqchip ->irq_set_type() will never be called as the triggering flags are 0. Because of that we do not have correct interrupt flow handler set for the interrupt. Fix this by adding a custom ->irq_startup() that checks if the interrupt has no triggering type set and in that case read the type directly from the hardware and install correct flow handler along with the mapping. Reported-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@xxxxxxxxx> Reported-by: Freddy Paul <freddy.paul@xxxxxxxxx> Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> commit f230e8ffc03f17bd9d6b90ea890b8252a8cc1821 Author: Michael Brunner <mibru@xxxxxx> Date: Mon May 11 12:46:49 2015 +0200 gpio: gpio-kempld: Fix get_direction return value This patch fixes an inverted return value of the gpio get_direction function. The wrong value causes the direction sysfs entry and GPIO debugfs file to indicate incorrect GPIO direction settings. In some cases it also prevents setting GPIO output values. The problem is also present in all other stable kernel versions since linux-3.12. Cc: Stable <stable@xxxxxxxxxxxxxxx> # v3.12+ Reported-by: Jochen Henneberg <jh@xxxxxxxxxxxxxxxxxxxxxxxxxx> Signed-off-by: Michael Brunner <michael.brunner@xxxxxxxxxxx> Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> commit 6d86750ce62391f5a0a7985d5c050c2e3c823ab9 Author: Johan Hovold <johan@xxxxxxxxxx> Date: Mon May 4 17:23:25 2015 +0200 gpio: fix gpio leak in gpiochip_add error path Make sure to free any hogged gpios on errors in gpiochip_add. Also move all forward declarations to the top of the file. Fixes: f625d4601759 ("gpio: add GPIO hogging mechanism") Signed-off-by: Johan Hovold <johan@xxxxxxxxxx> Reviewed-by: Alexandre Courbot <acourbot@xxxxxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> commit 8b2564ec7410928639db5c09a34d7d8330f1d759 Author: Alexey Kardashevskiy <aik@xxxxxxxxx> Date: Tue Apr 28 18:26:22 2015 +1000 lpfc: Fix breakage on big endian kernels This reverts 4fbdf9cb it breaks LPFC on POWER7 machine, big endian kernel. Without this, the kernel enters an infinite oops loop. This is the hardware used for verification: 0005:01:00.0 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter [10df:f100] (rev 03) 0005:01:00.1 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter [10df:f100] (rev 03) Signed-off-by: Alexey Kardashevskiy <aik@xxxxxxxxx> Reviewed-by: James Smart <james.smart@xxxxxxxxxx> Signed-off-by: James Bottomley <JBottomley@xxxxxxxx> commit dc45708ca9988656d706940df5fd102672c5de92 Author: K. Y. Srinivasan <kys@xxxxxxxxxxxxx> Date: Fri May 1 11:03:02 2015 -0700 storvsc: Set the SRB flags correctly when no data transfer is needed Set the SRB flags correctly when there is no data transfer. Without this change some IHV drivers will fail valid commands such as TEST_UNIT_READY. Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: K. Y. Srinivasan <kys@xxxxxxxxxxxxx> Reviewed-by: Long Li <longli@xxxxxxxxxxxxx> Signed-off-by: James Bottomley <JBottomley@xxxxxxxx> _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |