[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v2 4/6] tools/libxl: move remus code into libxl_remus.c





On 06/16/2015 09:08 PM, Ian Campbell wrote:
On Wed, 2015-06-03 at 16:01 +0800, Yang Hongyang wrote:
move remus code into libxl_remus.c.

Please say something like "... by refactoring bits of
libxl_domain_remus_start and domain_save_done into X and Y and moving
the remaining functionality unchanged into the new file".

I gave two examples of functions which changed there, but please make
sure the list is complete+accurate.

Okay, will fix the commit message next time, thank you!


Signed-off-by: Yang Hongyang <yanghy@xxxxxxxxxxxxxx>
CC: Ian Campbell <Ian.Campbell@xxxxxxxxxx>
CC: Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx>
CC: Wei Liu <wei.liu2@xxxxxxxxxx>
---
  tools/libxl/Makefile         |   2 +-
  tools/libxl/libxl.c          |  55 +-------
  tools/libxl/libxl_dom.c      | 206 +----------------------------
  tools/libxl/libxl_internal.h |  11 ++
  tools/libxl/libxl_remus.c    | 304 +++++++++++++++++++++++++++++++++++++++++++
  5 files changed, 318 insertions(+), 260 deletions(-)
  create mode 100644 tools/libxl/libxl_remus.c

diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index 3f98d62..8535eaa 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -56,7 +56,7 @@ else
  LIBXL_OBJS-y += libxl_nonetbuffer.o
  endif

-LIBXL_OBJS-y += libxl_remus_device.o libxl_remus_disk_drbd.o
+LIBXL_OBJS-y += libxl_remus.o libxl_remus_device.o libxl_remus_disk_drbd.o

  LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o libxl_psr.o
  LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o libxl_libfdt_compat.o
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 77c6a36..0f9248e 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -792,10 +792,6 @@ out:
      return ptr;
  }

-static void libxl__remus_setup_done(libxl__egc *egc,
-                                    libxl__remus_devices_state *rds, int rc);
-static void libxl__remus_setup_failed(libxl__egc *egc,
-                                      libxl__remus_devices_state *rds, int rc);
  static void remus_failover_cb(libxl__egc *egc,
                                libxl__domain_suspend_state *dss, int rc);

@@ -844,63 +840,14 @@ int libxl_domain_remus_start(libxl_ctx *ctx, 
libxl_domain_remus_info *info,

      assert(info);

-    /* Convenience aliases */
-    libxl__remus_devices_state *const rds = &dss->rds;
-
-    if (libxl_defbool_val(info->netbuf)) {
-        if (!libxl__netbuffer_enabled(gc)) {
-            LOG(ERROR, "Remus: No support for network buffering");
-            rc = ERROR_FAIL;
-            goto out;
-        }
-        rds->device_kind_flags |= (1 << LIBXL__DEVICE_KIND_VIF);
-    }
-
-    if (libxl_defbool_val(info->diskbuf))
-        rds->device_kind_flags |= (1 << LIBXL__DEVICE_KIND_VBD);
-
-    rds->ao = ao;
-    rds->domid = domid;
-    rds->callback = libxl__remus_setup_done;
-
      /* Point of no return */
-    libxl__remus_devices_setup(egc, rds);
+    libxl__remus_setup(egc, dss);
      return AO_INPROGRESS;

   out:
      return AO_ABORT(rc);
  }

-static void libxl__remus_setup_done(libxl__egc *egc,
-                                    libxl__remus_devices_state *rds, int rc)
-{
-    libxl__domain_suspend_state *dss = CONTAINER_OF(rds, *dss, rds);
-    STATE_AO_GC(dss->ao);
-
-    if (!rc) {
-        libxl__domain_save(egc, dss);
-        return;
-    }
-
-    LOG(ERROR, "Remus: failed to setup device for guest with domid %u, rc %d",
-        dss->domid, rc);
-    rds->callback = libxl__remus_setup_failed;
-    libxl__remus_devices_teardown(egc, rds);
-}
-
-static void libxl__remus_setup_failed(libxl__egc *egc,
-                                      libxl__remus_devices_state *rds, int rc)
-{
-    libxl__domain_suspend_state *dss = CONTAINER_OF(rds, *dss, rds);
-    STATE_AO_GC(dss->ao);
-
-    if (rc)
-        LOG(ERROR, "Remus: failed to teardown device after setup failed"
-            " for guest with domid %u, rc %d", dss->domid, rc);
-
-    dss->callback(egc, dss, rc);
-}
-
  static void remus_failover_cb(libxl__egc *egc,
                                libxl__domain_suspend_state *dss, int rc)
  {
diff --git a/tools/libxl/libxl_dom.c b/tools/libxl/libxl_dom.c
index 701e9f7..0f81081 100644
--- a/tools/libxl/libxl_dom.c
+++ b/tools/libxl/libxl_dom.c
@@ -1409,189 +1409,6 @@ int libxl__toolstack_save(uint32_t domid, uint8_t **buf,
      return 0;
  }

-/*----- remus callbacks -----*/
-static void remus_domain_suspend_callback_common_done(libxl__egc *egc,
-                                libxl__domain_suspend_state *dss, int ok);
-static void remus_devices_postsuspend_cb(libxl__egc *egc,
-                                         libxl__remus_devices_state *rds,
-                                         int rc);
-static void remus_devices_preresume_cb(libxl__egc *egc,
-                                       libxl__remus_devices_state *rds,
-                                       int rc);
-
-static void libxl__remus_domain_suspend_callback(void *data)
-{
-    libxl__save_helper_state *shs = data;
-    libxl__egc *egc = shs->egc;
-    libxl__domain_suspend_state *dss = CONTAINER_OF(shs, *dss, shs);
-
-    dss->callback_common_done = remus_domain_suspend_callback_common_done;
-    libxl__domain_suspend(egc, dss);
-}
-
-static void remus_domain_suspend_callback_common_done(libxl__egc *egc,
-                                libxl__domain_suspend_state *dss, int ok)
-{
-    if (!ok)
-        goto out;
-
-    libxl__remus_devices_state *const rds = &dss->rds;
-    rds->callback = remus_devices_postsuspend_cb;
-    libxl__remus_devices_postsuspend(egc, rds);
-    return;
-
-out:
-    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
-}
-
-static void remus_devices_postsuspend_cb(libxl__egc *egc,
-                                         libxl__remus_devices_state *rds,
-                                         int rc)
-{
-    int ok = 0;
-    libxl__domain_suspend_state *dss = CONTAINER_OF(rds, *dss, rds);
-
-    if (rc)
-        goto out;
-
-    ok = 1;
-
-out:
-    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
-}
-
-static void libxl__remus_domain_resume_callback(void *data)
-{
-    libxl__save_helper_state *shs = data;
-    libxl__egc *egc = shs->egc;
-    libxl__domain_suspend_state *dss = CONTAINER_OF(shs, *dss, shs);
-    STATE_AO_GC(dss->ao);
-
-    libxl__remus_devices_state *const rds = &dss->rds;
-    rds->callback = remus_devices_preresume_cb;
-    libxl__remus_devices_preresume(egc, rds);
-}
-
-static void remus_devices_preresume_cb(libxl__egc *egc,
-                                       libxl__remus_devices_state *rds,
-                                       int rc)
-{
-    int ok = 0;
-    libxl__domain_suspend_state *dss = CONTAINER_OF(rds, *dss, rds);
-    STATE_AO_GC(dss->ao);
-
-    if (rc)
-        goto out;
-
-    /* Resumes the domain and the device model */
-    rc = libxl__domain_resume(gc, dss->domid, /* Fast Suspend */1);
-    if (rc)
-        goto out;
-
-    ok = 1;
-
-out:
-    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
-}
-
-/*----- remus asynchronous checkpoint callback -----*/
-
-static void remus_checkpoint_dm_saved(libxl__egc *egc,
-                                      libxl__domain_suspend_state *dss, int 
rc);
-static void remus_devices_commit_cb(libxl__egc *egc,
-                                    libxl__remus_devices_state *rds,
-                                    int rc);
-static void remus_next_checkpoint(libxl__egc *egc, libxl__ev_time *ev,
-                                  const struct timeval *requested_abs);
-
-static void libxl__remus_domain_checkpoint_callback(void *data)
-{
-    libxl__save_helper_state *shs = data;
-    libxl__domain_suspend_state *dss = CONTAINER_OF(shs, *dss, shs);
-    libxl__egc *egc = dss->shs.egc;
-    STATE_AO_GC(dss->ao);
-
-    /* This would go into tailbuf. */
-    if (dss->hvm) {
-        libxl__domain_save_device_model(egc, dss, remus_checkpoint_dm_saved);
-    } else {
-        remus_checkpoint_dm_saved(egc, dss, 0);
-    }
-}
-
-static void remus_checkpoint_dm_saved(libxl__egc *egc,
-                                      libxl__domain_suspend_state *dss, int rc)
-{
-    /* Convenience aliases */
-    libxl__remus_devices_state *const rds = &dss->rds;
-
-    STATE_AO_GC(dss->ao);
-
-    if (rc) {
-        LOG(ERROR, "Failed to save device model. Terminating Remus..");
-        goto out;
-    }
-
-    rds->callback = remus_devices_commit_cb;
-    libxl__remus_devices_commit(egc, rds);
-
-    return;
-
-out:
-    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, 0);
-}
-
-static void remus_devices_commit_cb(libxl__egc *egc,
-                                    libxl__remus_devices_state *rds,
-                                    int rc)
-{
-    libxl__domain_suspend_state *dss = CONTAINER_OF(rds, *dss, rds);
-
-    STATE_AO_GC(dss->ao);
-
-    if (rc) {
-        LOG(ERROR, "Failed to do device commit op."
-            " Terminating Remus..");
-        goto out;
-    }
-
-    /*
-     * At this point, we have successfully checkpointed the guest and
-     * committed it at the backup. We'll come back after the checkpoint
-     * interval to checkpoint the guest again. Until then, let the guest
-     * continue execution.
-     */
-
-    /* Set checkpoint interval timeout */
-    rc = libxl__ev_time_register_rel(gc, &dss->checkpoint_timeout,
-                                     remus_next_checkpoint,
-                                     dss->interval);
-
-    if (rc)
-        goto out;
-
-    return;
-
-out:
-    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, 0);
-}
-
-static void remus_next_checkpoint(libxl__egc *egc, libxl__ev_time *ev,
-                                  const struct timeval *requested_abs)
-{
-    libxl__domain_suspend_state *dss =
-                            CONTAINER_OF(ev, *dss, checkpoint_timeout);
-
-    STATE_AO_GC(dss->ao);
-
-    /*
-     * Time to checkpoint the guest again. We return 1 to libxc
-     * (xc_domain_save.c). in order to continue executing the infinite loop
-     * (suspend, checkpoint, resume) in xc_domain_save().
-     */
-    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, 1);
-}
-
  /*----- main code for suspending, in order of execution -----*/

  static void domain_save_done(libxl__egc *egc,
@@ -1811,10 +1628,6 @@ static void save_device_model_datacopier_done(libxl__egc 
*egc,
      dss->save_dm_callback(egc, dss, our_rc);
  }

-static void remus_teardown_done(libxl__egc *egc,
-                                       libxl__remus_devices_state *rds,
-                                       int rc);
-
  static void domain_save_done(libxl__egc *egc,
                               libxl__domain_suspend_state *dss, int rc)
  {
@@ -1840,24 +1653,7 @@ static void domain_save_done(libxl__egc *egc,
       * from sending checkpoints. Teardown the network buffers and
       * release netlink resources.  This is an async op.
       */
-    LOG(WARN, "Remus: Domain suspend terminated with rc %d,"
-        " teardown Remus devices...", rc);
-    dss->rds.callback = remus_teardown_done;
-    libxl__remus_devices_teardown(egc, &dss->rds);
-}
-
-static void remus_teardown_done(libxl__egc *egc,
-                                       libxl__remus_devices_state *rds,
-                                       int rc)
-{
-    libxl__domain_suspend_state *dss = CONTAINER_OF(rds, *dss, rds);
-    STATE_AO_GC(dss->ao);
-
-    if (rc)
-        LOG(ERROR, "Remus: failed to teardown device for guest with domid %u,"
-            " rc %d", dss->domid, rc);
-
-    dss->callback(egc, dss, rc);
+    libxl__remus_teardown(egc, dss, rc);
  }

  /*==================== Miscellaneous ====================*/
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 164c448..dc6b62b 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3193,6 +3193,17 @@ _hidden void libxl__domain_suspend(libxl__egc *egc,
  /* used by libxc to suspend the guest during migration */
  _hidden void libxl__domain_suspend_callback(void *data);

+/* Remus callbacks for save */
+_hidden void libxl__remus_domain_suspend_callback(void *data);
+_hidden void libxl__remus_domain_resume_callback(void *data);
+_hidden void libxl__remus_domain_checkpoint_callback(void *data);
+/* Remus setup and teardown*/
+_hidden void libxl__remus_setup(libxl__egc *egc,
+                                libxl__domain_suspend_state *dss);
+_hidden void libxl__remus_teardown(libxl__egc *egc,
+                                   libxl__domain_suspend_state *dss,
+                                   int rc);
+
  /*
   * Convenience macros.
   */
diff --git a/tools/libxl/libxl_remus.c b/tools/libxl/libxl_remus.c
new file mode 100644
index 0000000..51261e0
--- /dev/null
+++ b/tools/libxl/libxl_remus.c
@@ -0,0 +1,304 @@
+/*
+ * Copyright (C) 2009      Citrix Ltd.
+ * Author Yang Hongyang <yanghy@xxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2 and later. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+
+/*----- Remus setup and teardown -----*/
+
+static void remus_setup_done(libxl__egc *egc,
+                             libxl__remus_devices_state *rds, int rc);
+static void remus_setup_failed(libxl__egc *egc,
+                               libxl__remus_devices_state *rds, int rc);
+
+void libxl__remus_setup(libxl__egc *egc, libxl__domain_suspend_state *dss)
+{
+    /* Convenience aliases */
+    libxl__remus_devices_state *const rds = &dss->rds;
+    const libxl_domain_remus_info *const info = dss->remus;
+
+    STATE_AO_GC(dss->ao);
+
+    if (libxl_defbool_val(info->netbuf)) {
+        if (!libxl__netbuffer_enabled(gc)) {
+            LOG(ERROR, "Remus: No support for network buffering");
+            goto out;
+        }
+        rds->device_kind_flags |= (1 << LIBXL__DEVICE_KIND_VIF);
+    }
+
+    if (libxl_defbool_val(info->diskbuf))
+        rds->device_kind_flags |= (1 << LIBXL__DEVICE_KIND_VBD);
+
+    rds->ao = ao;
+    rds->domid = dss->domid;
+    rds->callback = remus_setup_done;
+
+    libxl__remus_devices_setup(egc, rds);
+    return;
+
+out:
+    dss->callback(egc, dss, ERROR_FAIL);
+}
+
+static void remus_setup_done(libxl__egc *egc,
+                             libxl__remus_devices_state *rds, int rc)
+{
+    libxl__domain_suspend_state *dss = CONTAINER_OF(rds, *dss, rds);
+    STATE_AO_GC(dss->ao);
+
+    if (!rc) {
+        libxl__domain_save(egc, dss);
+        return;
+    }
+
+    LOG(ERROR, "Remus: failed to setup device for guest with domid %u, rc %d",
+        dss->domid, rc);
+    rds->callback = remus_setup_failed;
+    libxl__remus_devices_teardown(egc, rds);
+}
+
+static void remus_setup_failed(libxl__egc *egc,
+                               libxl__remus_devices_state *rds, int rc)
+{
+    libxl__domain_suspend_state *dss = CONTAINER_OF(rds, *dss, rds);
+    STATE_AO_GC(dss->ao);
+
+    if (rc)
+        LOG(ERROR, "Remus: failed to teardown device after setup failed"
+            " for guest with domid %u, rc %d", dss->domid, rc);
+
+    dss->callback(egc, dss, rc);
+}
+
+static void remus_teardown_done(libxl__egc *egc,
+                                libxl__remus_devices_state *rds,
+                                int rc);
+void libxl__remus_teardown(libxl__egc *egc,
+                           libxl__domain_suspend_state *dss,
+                           int rc)
+{
+    EGC_GC;
+
+    LOG(WARN, "Remus: Domain suspend terminated with rc %d,"
+        " teardown Remus devices...", rc);
+    dss->rds.callback = remus_teardown_done;
+    libxl__remus_devices_teardown(egc, &dss->rds);
+}
+
+static void remus_teardown_done(libxl__egc *egc,
+                                libxl__remus_devices_state *rds,
+                                int rc)
+{
+    libxl__domain_suspend_state *dss = CONTAINER_OF(rds, *dss, rds);
+    STATE_AO_GC(dss->ao);
+
+    if (rc)
+        LOG(ERROR, "Remus: failed to teardown device for guest with domid %u,"
+            " rc %d", dss->domid, rc);
+
+    dss->callback(egc, dss, rc);
+}
+
+/*----- remus callbacks -----*/
+static void remus_domain_suspend_callback_common_done(libxl__egc *egc,
+                                libxl__domain_suspend_state *dss, int ok);
+static void remus_devices_postsuspend_cb(libxl__egc *egc,
+                                         libxl__remus_devices_state *rds,
+                                         int rc);
+static void remus_devices_preresume_cb(libxl__egc *egc,
+                                       libxl__remus_devices_state *rds,
+                                       int rc);
+
+void libxl__remus_domain_suspend_callback(void *data)
+{
+    libxl__save_helper_state *shs = data;
+    libxl__egc *egc = shs->egc;
+    libxl__domain_suspend_state *dss = CONTAINER_OF(shs, *dss, shs);
+
+    dss->callback_common_done = remus_domain_suspend_callback_common_done;
+    libxl__domain_suspend(egc, dss);
+}
+
+static void remus_domain_suspend_callback_common_done(libxl__egc *egc,
+                                libxl__domain_suspend_state *dss, int ok)
+{
+    if (!ok)
+        goto out;
+
+    libxl__remus_devices_state *const rds = &dss->rds;
+    rds->callback = remus_devices_postsuspend_cb;
+    libxl__remus_devices_postsuspend(egc, rds);
+    return;
+
+out:
+    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
+}
+
+static void remus_devices_postsuspend_cb(libxl__egc *egc,
+                                         libxl__remus_devices_state *rds,
+                                         int rc)
+{
+    int ok = 0;
+    libxl__domain_suspend_state *dss = CONTAINER_OF(rds, *dss, rds);
+
+    if (rc)
+        goto out;
+
+    ok = 1;
+
+out:
+    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
+}
+
+void libxl__remus_domain_resume_callback(void *data)
+{
+    libxl__save_helper_state *shs = data;
+    libxl__egc *egc = shs->egc;
+    libxl__domain_suspend_state *dss = CONTAINER_OF(shs, *dss, shs);
+    STATE_AO_GC(dss->ao);
+
+    libxl__remus_devices_state *const rds = &dss->rds;
+    rds->callback = remus_devices_preresume_cb;
+    libxl__remus_devices_preresume(egc, rds);
+}
+
+static void remus_devices_preresume_cb(libxl__egc *egc,
+                                       libxl__remus_devices_state *rds,
+                                       int rc)
+{
+    int ok = 0;
+    libxl__domain_suspend_state *dss = CONTAINER_OF(rds, *dss, rds);
+    STATE_AO_GC(dss->ao);
+
+    if (rc)
+        goto out;
+
+    /* Resumes the domain and the device model */
+    rc = libxl__domain_resume(gc, dss->domid, /* Fast Suspend */1);
+    if (rc)
+        goto out;
+
+    ok = 1;
+
+out:
+    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
+}
+
+/*----- remus asynchronous checkpoint callback -----*/
+
+static void remus_checkpoint_dm_saved(libxl__egc *egc,
+                                      libxl__domain_suspend_state *dss, int 
rc);
+static void remus_devices_commit_cb(libxl__egc *egc,
+                                    libxl__remus_devices_state *rds,
+                                    int rc);
+static void remus_next_checkpoint(libxl__egc *egc, libxl__ev_time *ev,
+                                  const struct timeval *requested_abs);
+
+void libxl__remus_domain_checkpoint_callback(void *data)
+{
+    libxl__save_helper_state *shs = data;
+    libxl__domain_suspend_state *dss = CONTAINER_OF(shs, *dss, shs);
+    libxl__egc *egc = dss->shs.egc;
+    STATE_AO_GC(dss->ao);
+
+    /* This would go into tailbuf. */
+    if (dss->hvm) {
+        libxl__domain_save_device_model(egc, dss, remus_checkpoint_dm_saved);
+    } else {
+        remus_checkpoint_dm_saved(egc, dss, 0);
+    }
+}
+
+static void remus_checkpoint_dm_saved(libxl__egc *egc,
+                                      libxl__domain_suspend_state *dss, int rc)
+{
+    /* Convenience aliases */
+    libxl__remus_devices_state *const rds = &dss->rds;
+
+    STATE_AO_GC(dss->ao);
+
+    if (rc) {
+        LOG(ERROR, "Failed to save device model. Terminating Remus..");
+        goto out;
+    }
+
+    rds->callback = remus_devices_commit_cb;
+    libxl__remus_devices_commit(egc, rds);
+
+    return;
+
+out:
+    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, 0);
+}
+
+static void remus_devices_commit_cb(libxl__egc *egc,
+                                    libxl__remus_devices_state *rds,
+                                    int rc)
+{
+    libxl__domain_suspend_state *dss = CONTAINER_OF(rds, *dss, rds);
+
+    STATE_AO_GC(dss->ao);
+
+    if (rc) {
+        LOG(ERROR, "Failed to do device commit op."
+            " Terminating Remus..");
+        goto out;
+    }
+
+    /*
+     * At this point, we have successfully checkpointed the guest and
+     * committed it at the backup. We'll come back after the checkpoint
+     * interval to checkpoint the guest again. Until then, let the guest
+     * continue execution.
+     */
+
+    /* Set checkpoint interval timeout */
+    rc = libxl__ev_time_register_rel(gc, &dss->checkpoint_timeout,
+                                     remus_next_checkpoint,
+                                     dss->interval);
+
+    if (rc)
+        goto out;
+
+    return;
+
+out:
+    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, 0);
+}
+
+static void remus_next_checkpoint(libxl__egc *egc, libxl__ev_time *ev,
+                                  const struct timeval *requested_abs)
+{
+    libxl__domain_suspend_state *dss =
+                            CONTAINER_OF(ev, *dss, checkpoint_timeout);
+
+    STATE_AO_GC(dss->ao);
+
+    /*
+     * Time to checkpoint the guest again. We return 1 to libxc
+     * (xc_domain_save.c). in order to continue executing the infinite loop
+     * (suspend, checkpoint, resume) in xc_domain_save().
+     */
+    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, 1);
+}
+/*
+ * Local variables:
+ * mode: C
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */


.


--
Thanks,
Yang.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.