[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH 5/6] xen/pass-through: log errno values rather than function return ones



On Fri, 5 Jun 2015, Jan Beulich wrote:
> Functions setting errno commonly return just -1, which is of no
> particular use in the log file.
> 
> Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx>

Reviewed-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>


> --- a/qemu/upstream/hw/xen/xen_pt.c
> +++ b/qemu/upstream/hw/xen/xen_pt.c
> @@ -609,8 +609,8 @@ static void xen_pt_region_update(XenPCIP
>                                        guest_port, machine_port, size,
>                                        op);
>          if (rc) {
> -            XEN_PT_ERR(d, "%s ioport mapping failed! (rc: %i)\n",
> -                       adding ? "create new" : "remove old", rc);
> +            XEN_PT_ERR(d, "%s ioport mapping failed! (err: %i)\n",
> +                       adding ? "create new" : "remove old", errno);
>          }
>      } else {
>          pcibus_t guest_addr = sec->offset_within_address_space;
> @@ -623,8 +623,8 @@ static void xen_pt_region_update(XenPCIP
>                                        XEN_PFN(size + XC_PAGE_SIZE - 1),
>                                        op);
>          if (rc) {
> -            XEN_PT_ERR(d, "%s mem mapping failed! (rc: %i)\n",
> -                       adding ? "create new" : "remove old", rc);
> +            XEN_PT_ERR(d, "%s mem mapping failed! (err: %i)\n",
> +                       adding ? "create new" : "remove old", errno);
>          }
>      }
>  }
> @@ -738,8 +738,8 @@ static int xen_pt_initfn(PCIDevice *d)
>      rc = xc_physdev_map_pirq(xen_xc, xen_domid, machine_irq, &pirq);
>  
>      if (rc < 0) {
> -        XEN_PT_ERR(d, "Mapping machine irq %u to pirq %i failed, (rc: %d)\n",
> -                   machine_irq, pirq, rc);
> +        XEN_PT_ERR(d, "Mapping machine irq %u to pirq %i failed, (err: 
> %d)\n",
> +                   machine_irq, pirq, errno);
>  
>          /* Disable PCI intx assertion (turn on bit10 of devctl) */
>          cmd |= PCI_COMMAND_INTX_DISABLE;
> @@ -760,8 +760,8 @@ static int xen_pt_initfn(PCIDevice *d)
>                                         PCI_SLOT(d->devfn),
>                                         e_intx);
>          if (rc < 0) {
> -            XEN_PT_ERR(d, "Binding of interrupt %i failed! (rc: %d)\n",
> -                       e_intx, rc);
> +            XEN_PT_ERR(d, "Binding of interrupt %i failed! (err: %d)\n",
> +                       e_intx, errno);
>  
>              /* Disable PCI intx assertion (turn on bit10 of devctl) */
>              cmd |= PCI_COMMAND_INTX_DISABLE;
> @@ -770,7 +770,7 @@ static int xen_pt_initfn(PCIDevice *d)
>              if (xen_pt_mapped_machine_irq[machine_irq] == 0) {
>                  if (xc_physdev_unmap_pirq(xen_xc, xen_domid, machine_irq)) {
>                      XEN_PT_ERR(d, "Unmapping of machine interrupt %i failed!"
> -                               " (rc: %d)\n", machine_irq, rc);
> +                               " (err: %d)\n", machine_irq, errno);
>                  }
>              }
>              s->machine_irq = 0;
> @@ -808,9 +808,9 @@ static void xen_pt_unregister_device(PCI
>                                       0 /* isa_irq */);
>          if (rc < 0) {
>              XEN_PT_ERR(d, "unbinding of interrupt INT%c failed."
> -                       " (machine irq: %i, rc: %d)"
> +                       " (machine irq: %i, err: %d)"
>                         " But bravely continuing on..\n",
> -                       'a' + intx, machine_irq, rc);
> +                       'a' + intx, machine_irq, errno);
>          }
>      }
>  
> @@ -828,9 +828,9 @@ static void xen_pt_unregister_device(PCI
>              rc = xc_physdev_unmap_pirq(xen_xc, xen_domid, machine_irq);
>  
>              if (rc < 0) {
> -                XEN_PT_ERR(d, "unmapping of interrupt %i failed. (rc: %d)"
> +                XEN_PT_ERR(d, "unmapping of interrupt %i failed. (err: %d)"
>                             " But bravely continuing on..\n",
> -                           machine_irq, rc);
> +                           machine_irq, errno);
>              }
>          }
>      }
> --- a/qemu/upstream/hw/xen/xen_pt_msi.c
> +++ b/qemu/upstream/hw/xen/xen_pt_msi.c
> @@ -133,8 +133,8 @@ static int msi_msix_setup(XenPCIPassthro
>                                       msix_entry, table_base);
>          if (rc) {
>              XEN_PT_ERR(&s->dev,
> -                       "Mapping of MSI%s (rc: %i, vec: %#x, entry %#x)\n",
> -                       is_msix ? "-X" : "", rc, gvec, msix_entry);
> +                       "Mapping of MSI%s (err: %i, vec: %#x, entry %#x)\n",
> +                       is_msix ? "-X" : "", errno, gvec, msix_entry);
>              return rc;
>          }
>      }
> @@ -167,12 +167,12 @@ static int msi_msix_update(XenPCIPassthr
>                                    pirq, gflags, table_addr);
>  
>      if (rc) {
> -        XEN_PT_ERR(d, "Updating of MSI%s failed. (rc: %d)\n",
> -                   is_msix ? "-X" : "", rc);
> +        XEN_PT_ERR(d, "Updating of MSI%s failed. (err: %d)\n",
> +                   is_msix ? "-X" : "", errno);
>  
>          if (xc_physdev_unmap_pirq(xen_xc, xen_domid, *old_pirq)) {
> -            XEN_PT_ERR(d, "Unmapping of MSI%s pirq %d failed.\n",
> -                       is_msix ? "-X" : "", *old_pirq);
> +            XEN_PT_ERR(d, "Unmapping of MSI%s pirq %d failed. (err: %d)\n",
> +                       is_msix ? "-X" : "", *old_pirq, errno);
>          }
>          *old_pirq = XEN_PT_UNASSIGNED_PIRQ;
>      }
> @@ -200,8 +200,8 @@ static int msi_msix_disable(XenPCIPassth
>                     is_msix ? "-X" : "", pirq, gvec);
>          rc = xc_domain_unbind_msi_irq(xen_xc, xen_domid, gvec, pirq, gflags);
>          if (rc) {
> -            XEN_PT_ERR(d, "Unbinding of MSI%s failed. (pirq: %d, gvec: 
> %#x)\n",
> -                       is_msix ? "-X" : "", pirq, gvec);
> +            XEN_PT_ERR(d, "Unbinding of MSI%s failed. (err: %d, pirq: %d, 
> gvec: %#x)\n",
> +                       is_msix ? "-X" : "", errno, pirq, gvec);
>              return rc;
>          }
>      }
> @@ -209,8 +209,8 @@ static int msi_msix_disable(XenPCIPassth
>      XEN_PT_LOG(d, "Unmap MSI%s pirq %d\n", is_msix ? "-X" : "", pirq);
>      rc = xc_physdev_unmap_pirq(xen_xc, xen_domid, pirq);
>      if (rc) {
> -        XEN_PT_ERR(d, "Unmapping of MSI%s pirq %d failed. (rc: %i)\n",
> -                   is_msix ? "-X" : "", pirq, rc);
> +        XEN_PT_ERR(d, "Unmapping of MSI%s pirq %d failed. (err: %i)\n",
> +                   is_msix ? "-X" : "", pirq, errno);
>          return rc;
>      }
>  
> @@ -410,8 +410,8 @@ int xen_pt_msix_update_remap(XenPCIPasst
>              ret = xc_domain_unbind_pt_irq(xen_xc, xen_domid, entry->pirq,
>                                            PT_IRQ_TYPE_MSI, 0, 0, 0, 0);
>              if (ret) {
> -                XEN_PT_ERR(&s->dev, "unbind MSI-X entry %d failed\n",
> -                           entry->pirq);
> +                XEN_PT_ERR(&s->dev, "unbind MSI-X entry %d failed (err: 
> %d)\n",
> +                           entry->pirq, errno);
>              }
>              entry->updated = true;
>          }
> 
> 
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.