|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [libvirt test] 58606: trouble: broken/fail/pass
flight 58606 libvirt real [real] http://logs.test-lab.xenproject.org/osstest/logs/58606/ Failures and problems with tests :-( Tests which did not succeed and are blocking, including tests which could not be run: test-amd64-i386-libvirt 3 host-install(3) broken REGR. vs. 58510 Regressions which are regarded as allowable (not blocking): test-amd64-i386-libvirt-xsm 11 guest-start fail like 58510 test-armhf-armhf-libvirt 11 guest-start fail like 58510 Tests which did not succeed, but are not blocking: test-armhf-armhf-libvirt-xsm 11 guest-start fail never pass test-amd64-amd64-libvirt-xsm 12 migrate-support-check fail never pass test-amd64-amd64-libvirt 12 migrate-support-check fail never pass version targeted for testing: libvirt ecb9a7a10b1559ddb41832f75d012054c1017366 baseline version: libvirt bcf1349bb180d2a3aab6906aea524e2d6aa7e52a ------------------------------------------------------------ People who touched revisions under test: Boris Fiuczynski <fiuczy@xxxxxxxxxxxxxxxxxx> Guido Günther <agx@xxxxxxxxxxx> John Ferlan <jferlan@xxxxxxxxxx> Ján Tomko <jtomko@xxxxxxxxxx> Martin Kletzander <mkletzan@xxxxxxxxxx> Michal Privoznik <mprivozn@xxxxxxxxxx> Peter Krempa <pkrempa@xxxxxxxxxx> ------------------------------------------------------------ jobs: build-amd64-xsm pass build-armhf-xsm pass build-i386-xsm pass build-amd64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops pass test-amd64-amd64-libvirt-xsm pass test-armhf-armhf-libvirt-xsm fail test-amd64-i386-libvirt-xsm fail test-amd64-amd64-libvirt pass test-armhf-armhf-libvirt fail test-amd64-i386-libvirt broken ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary broken-step test-amd64-i386-libvirt host-install(3) Not pushing. ------------------------------------------------------------ commit ecb9a7a10b1559ddb41832f75d012054c1017366 Author: Guido Günther <agx@xxxxxxxxxxx> Date: Fri Jun 5 12:41:22 2015 +0200 configure: Remove check for pkcheck_supports_uid We're using Polkit's DBus API so no need to check wether this feature is supported. We don't use the result or the path to the pkcheck program anywhere. commit 38788a3209c5d7d2cece261ae128fb07bb348ce7 Author: Martin Kletzander <mkletzan@xxxxxxxxxx> Date: Mon Jun 15 10:41:17 2015 +0200 tests: Use libvirt properly with initialization and error dispatching We were using "complicated" error printing in virnetservertest even though we could've just dispatched the error. Also add some good practices that might come in handy (the code may fail without proper initialization and event loop). Signed-off-by: Martin Kletzander <mkletzan@xxxxxxxxxx> commit 73ad20e936b0fc9fac59efb66e6f77a5739aab4b Author: Martin Kletzander <mkletzan@xxxxxxxxxx> Date: Mon Jun 15 11:28:11 2015 +0200 Generate JSON with mDNS entries only when built --with-avahi One string was already used only if that condition was true, second one is added now. Both are used in a nicer way. Signed-off-by: Martin Kletzander <mkletzan@xxxxxxxxxx> commit fcc2aab688244d3e07c578080653ee526c056b38 Author: Martin Kletzander <mkletzan@xxxxxxxxxx> Date: Thu Jun 11 13:58:43 2015 +0200 rpc: Fix possible crash when MDNSAddEntry fails If virNetServerMDNSAddEntry() fails when adding a service to a server, it doesn't decrease the number of services. Hence access to their members segfaults (e.g. when free()-ing the sruct). Signed-off-by: Martin Kletzander <mkletzan@xxxxxxxxxx> commit 5e55534b9ab4e1c09085e67e20f46780d1132e27 Author: Martin Kletzander <mkletzan@xxxxxxxxxx> Date: Thu May 21 16:39:26 2015 -0700 build: Remove unnecessarily repeated rules for syms -> def Suggested-by: Michal PrÃvoznÃk <mprivozn@xxxxxxxxxx> Signed-off-by: Martin Kletzander <mkletzan@xxxxxxxxxx> commit 840eca32aba4f67e3d4473aae5b075062bc49006 Author: Boris Fiuczynski <fiuczy@xxxxxxxxxxxxxxxxxx> Date: Wed Jun 10 09:02:36 2015 +0200 qemu: monitor: Add memory balloon support for virtio-ccw The search for the memory balloon driver object is extended by a second known name "virtio-balloon-ccw" in support for virtio-ccw. Signed-off-by: Boris Fiuczynski <fiuczy@xxxxxxxxxxxxxxxxxx> Reviewed-by: Daniel Hansel <daniel.hansel@xxxxxxxxxxxxxxxxxx> Reviewed-by: Eric Farman <farman@xxxxxxxxxxxxxxxxxx> Reviewed-by: Stefan Zimmermann <stzi@xxxxxxxxxxxxxxxxxx> commit 17ba622451d51bbe7b0000bab0172894b8e60ae8 Author: Ján Tomko <jtomko@xxxxxxxxxx> Date: Mon Jun 15 14:08:05 2015 +0200 man: clarify usage of virsh blockcopy with --xml The --xml option is mandatory if an XML description is used. Otherwise the third parameter is treated as the destination. https://bugzilla.redhat.com/show_bug.cgi?id=1206406#c3 commit 4ed2b9a7e4bf2109b3711e493e6c4559d7227885 Author: Peter Krempa <pkrempa@xxxxxxxxxx> Date: Fri Jun 12 15:53:05 2015 +0200 qemu: emulatorpin: Don't reset pinning when pinning to all cpus Similarly to a02a161bb8a6caf0db4dd446ed1cdf53d97b40 remove the default pinning assumption from emulatorpin. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1227180 commit c4bdfafcbb9ed00fa450d302acf9cf7929f24fc4 Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Mon Jun 15 13:13:27 2015 +0200 getOldStyleBlockDevice: Adjust formatting Instead of initializing return value to zero (success) and overwriting it on every failure just before the control jumps onto 'out' label, let's initialize to an error value and set to zero only when we are sure about the success. Just follow the pattern we have in the rest of the code. Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit 71b66bec2bd54e991a506834a3834d4513970c65 Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Mon Jun 15 13:13:27 2015 +0200 getNewStyleBlockDevice: Adjust formatting Instead of initializing return value to zero (success) and overwriting it on every failure just before the control jumps onto 'out' label, let's initialize to an error value and set to zero only when we are sure about the success. Just follow the pattern we have in the rest of the code. Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit 84020f9a398f739ee2cf7588a7cf3b4b0c077984 Author: John Ferlan <jferlan@xxxxxxxxxx> Date: Tue Jun 9 18:15:39 2015 -0400 storage: Disallow wiping an extended disk partition https://bugzilla.redhat.com/show_bug.cgi?id=1225694 Check if the disk partition to be wiped is the extended partition, if so then disallow it. Do this via changing the wipeVol backend to check the volume before passing to the common virStorageBackendVolWipeLocal commit 243bbcc5dbce4e9fea863f1d59c2d22b1e1156b4 Author: Ján Tomko <jtomko@xxxxxxxxxx> Date: Mon Jun 15 10:38:21 2015 +0200 qemu caps: spell queue commit 4fce9e84798be1441d8bc5b96f0ed68589e85222 Author: John Ferlan <jferlan@xxxxxxxxxx> Date: Tue Jun 9 16:49:00 2015 -0400 qemu: Do not support 'serial' scsi-block 'lun' devices https://bugzilla.redhat.com/show_bug.cgi?id=1021480 Seems the property has been deprecated for qemu, although seemingly ignored. This patch enforces from a libvirt perspective that a scsi-block 'lun' device should not provide the 'serial' property. commit 1feaccf0001794e167b0374abf75d97024414e27 Author: John Ferlan <jferlan@xxxxxxxxxx> Date: Mon Jun 8 18:41:28 2015 -0400 storage: Need to set secrettype for direct iscsi disk volume https://bugzilla.redhat.com/show_bug.cgi?id=1200206 Commit id '1b4eaa61' added the ability to have a mode='direct' for an iscsi disk volume. It relied on virStorageTranslateDiskSourcePool in order to copy any disk source pool authentication information to the direct disk volume, but it neglected to also copy the 'secrettype' field which ends up being used in the domain volume formatting code. Adding a secrettype for this case will allow for proper formatting later and allow disk snapshotting to work properly Additionally libvirtd restart processing would fail to find the domain since the translation processing code is run after domain xml processing, so handle the the case where the authdef could have an empty secrettype field when processing the auth and additionally ignore performing the actual and expected auth secret type checks for a DISK_VOLUME since that data will be reassembled later during translation processing of the running domain. commit f8867012900ab124a7b09b0022155b4f1d950d52 Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Thu Jun 11 16:15:46 2015 +0200 virCapabilitiesDomainDataLookup: Produce saner error message During a review, I've noticed this error message that was eventually produced when I was trying to define a domain: error: invalid argument: could not find capabilities for arch=mips64el domaintype=(null) Look at the (null). Why is it there? Well, during XML parsing, we try to look up the default emulator for given OS type and possibly virt type too. And this is the problem, because if we don't want to look up by virt type, a -1 is passed to note this fact. Later, the code handles -1 just right. Except for error message. When it is constructed (in a very fabulous way I must say), the value is compared to zero, not -1. And since we don't have any translation from -1 to a virt type string, we just print (null). Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |