[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v5 01/17] VT-d Posted-intterrupt (PI) design



On Wed, Aug 12, 2015 at 10:35:22AM +0800, Feng Wu wrote:

The title has an extra 'i'.

> Add the design doc for VT-d PI.
> 
> CC: Kevin Tian <kevin.tian@xxxxxxxxx>
> CC: Yang Zhang <yang.z.zhang@xxxxxxxxx>
> CC: Jan Beulich <jbeulich@xxxxxxxx>
> CC: Keir Fraser <keir@xxxxxxx>
> CC: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
> CC: George Dunlap <george.dunlap@xxxxxxxxxxxxx>
> Signed-off-by: Feng Wu <feng.wu@xxxxxxxxx>
> Reviewed-by: Kevin Tian <kevin.tian@xxxxxxxxx>
> ---
>  docs/misc/vtd-pi.txt | 333 
> +++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 333 insertions(+)
>  create mode 100644 docs/misc/vtd-pi.txt
> 
> diff --git a/docs/misc/vtd-pi.txt b/docs/misc/vtd-pi.txt
> new file mode 100644
> index 0000000..98a77ba
> --- /dev/null
> +++ b/docs/misc/vtd-pi.txt
> @@ -0,0 +1,333 @@
> +Authors: Feng Wu <feng.wu@xxxxxxxxx>
> +
> +VT-d Posted-interrupt (PI) design for XEN
> +
> +Background
> +==========
> +With the development of virtualization, there are more and more device
> +assignment requirements. However, today when a VM is running with
> +assigned devices (such as, NIC), external interrupt handling for the assigned
> +devices always needs VMM intervention.
> +
> +VT-d Posted-interrupt is a more enhanced method to handle interrupts
> +in the virtualization environment. Interrupt posting is the process by
> +which an interrupt request is recorded in a memory-resident
> +posted-interrupt-descriptor structure by the root-complex, followed by
> +an optional notification event issued to the CPU complex.
> +
> +With VT-d Posted-interrupt we can get the following advantages:
> +- Direct delivery of external interrupts to running vCPUs without VMM
> +intervention
> +- Decrease the interrupt migration complexity. On vCPU migration, software
> +can atomically co-migrate all interrupts targeting the migrating vCPU. For
> +virtual machines with assigned devices, migrating a vCPU across pCPUs
> +either incur the overhead of forwarding interrupts in software (e.g. via VMM

s/incur/incurs/
> +generated IPIS), or complexity to independently migrate each interrupt 
> targeting

s/IPIS/IPIs
> +the vCPU to the new pCPU. However, after enabling VT-d PI, the destination 
> vCPU
> +of an external interrupt from assigned devices is stored in the IRTE (i.e.
> +Posted-interrupt Descriptor Address), when vCPU is migrated to another pCPU,
> +we will set this new pCPU in the 'NDST' filed of Posted-interrupt 
> descriptor, this
> +make the interrupt migration automatic.
> +
> +Here is what Xen currently does for external interrupts from assigned 
> devices:
> +
> +When a VM is running and an external interrupt from an assigned device occurs
> +for it. VM-EXIT happens, then:
> +
> +vmx_do_extint() --> do_IRQ() --> __do_IRQ_guest() --> hvm_do_IRQ_dpci() -->
> +raise_softirq_for(pirq_dpci) --> raise_softirq(HVM_DPCI_SOFTIRQ)
> +
> +softirq HVM_DPCI_SOFTIRQ is bound to dpci_softirq()
> +
> +dpci_softirq() --> hvm_dirq_assist() --> vmsi_deliver_pirq() --> 
> vmsi_deliver() -->
> +vmsi_inj_irq() --> vlapic_set_irq()
> +
> +vlapic_set_irq() does the following things:
> +1. If CPU-side posted-interrupt is supported, call vmx_deliver_posted_intr() 
> to deliver
> +the virtual interrupt via posted-interrupt infrastructure.
> +2. Else if CPU-side posted-interrupt is not supported, set the related vIRR 
> in vLAPIC
> +page and call vcpu_kick() to kick the related vCPU. Before VM-Entry, 
> vmx_intr_assist()
> +will help to inject the interrupt to guests.
> +
> +However, after VT-d PI is supported, when a guest is running in non-root and 
> an
> +external interrupt from an assigned device occurs for it. No VM-Exit is 
> needed,
> +the guest can handle this totally in non-root mode, thus avoiding all the 
> above
> +code flow.
> +
> +Posted-interrupt Introduction
> +========================
> +There are two components to the Posted-interrupt architecture:
> +Processor Support and Root-Complex Support
> +
> +- Processor Support
> +Posted-interrupt processing is a feature by which a processor processes
> +the virtual interrupts by recording them as pending on the virtual-APIC
> +page.
> +
> +Posted-interrupt processing is enabled by setting the process posted
> +interrupts VM-execution control. The processing is performed in response
> +to the arrival of an interrupt with the posted-interrupt notification vector.
> +In response to such an interrupt, the processor processes virtual interrupts
> +recorded in a data structure called a posted-interrupt descriptor.
> +
> +More information about APICv and CPU-side Posted-interrupt, please refer
> +to Chapter 29, and Section 29.6 in the Intel SDM:
> +http://www.intel.com/content/dam/www/public/us/en/documents/manuals/64-ia-32-architectures-software-developer-manual-325462.pdf
> +
> +- Root-Complex Support
> +Interrupt posting is the process by which an interrupt request (from IOAPIC
> +or MSI/MSIx capable sources) is recorded in a memory-resident
> +posted-interrupt-descriptor structure by the root-complex, followed by
> +an optional notification event issued to the CPU complex. The interrupt
> +request arriving at the root-complex carry the identity of the interrupt
> +request source and a 'remapping-index'. The remapping-index is used to
> +look-up an entry from the memory-resident interrupt-remap-table. Unlike
> +with interrupt-remapping, the interrupt-remap-table-entry for a posted-

s/with//
> +interrupt, specifies a virtual-vector and a pointer to the posted-interrupt
> +descriptor. The virtual-vector specifies the vector of the interrupt to be
> +recorded in the posted-interrupt descriptor. The posted-interrupt descriptor
> +hosts storage for the virtual-vectors and contains the attributes of the
> +notification event (interrupt) to be issued to the CPU complex to inform
> +CPU/software about pending interrupts recorded in the posted-interrupt
> +descriptor.
> +
> +More information about VT-d PI, please refer to
> +http://www.intel.com/content/www/us/en/intelligent-systems/intel-technology/vt-directed-io-spec.html
> +
> +Important Definitions
> +==================
> +There are some changes to IRTE and posted-interrupt descriptor after
> +VT-d PI is introduced:
> +IRTE: Interrupt Remapping Table Entry
> +Posted-interrupt Descriptor Address: the address of the posted-interrupt 
> descriptor
> +Virtual Vector: the guest vector of the interrupt
> +URG: indicates if the interrupt is urgent
> +
> +Posted-interrupt descriptor:
> +The Posted Interrupt Descriptor hosts the following fields:
> +Posted Interrupt Request (PIR): Provide storage for posting (recording) 
> interrupts (one bit
> +per vector, for up to 256 vectors).
> +
> +Outstanding Notification (ON): Indicate if there is a notification event 
> outstanding (not
> +processed by processor or software) for this Posted Interrupt Descriptor. 
> When this field is 0,
> +hardware modifies it from 0 to 1 when generating a notification event, and 
> the entity receiving
> +the notification event (processor or software) resets it as part of posted 
> interrupt processing.
> +
> +Suppress Notification (SN): Indicate if a notification event is to be 
> suppressed (not
> +generated) for non-urgent interrupt requests (interrupts processed through 
> an IRTE with
> +URG=0).
> +
> +Notification Vector (NV): Specify the vector for notification event 
> (interrupt).
> +
> +Notification Destination (NDST): Specify the physical APIC-ID of the 
> destination logical
> +processor for the notification event.
> +
> +Design Overview
> +==============
> +In this design, we will cover the following items:
> +1. Add a variable to control whether enable VT-d posted-interrupt or not.
> +2. VT-d PI feature detection.
> +3. Extend posted-interrupt descriptor structure to cover VT-d PI specific 
> stuff.

s/stuff/items/

But that really is up to you :-)

> +4. Extend IRTE structure to support VT-d PI.
> +5. Introduce a new global vector which is used for waking up the blocked 
> vCPU.
> +6. Update IRTE when guest modifies the interrupt configuration (MSI/MSIx 
> configuration).
> +7. Update posted-interrupt descriptor during vCPU scheduling (when the state
> +of the vCPU is transmitted among RUNSTATE_running / RUNSTATE_blocked/
> +RUNSTATE_runnable / RUNSTATE_offline).
> +8. How to wakeup blocked vCPU when an interrupt is posted for it (wakeup 
> notification handler).
> +9. New boot command line for Xen, which controls VT-d PI feature by user.
> +10. Multicast/broadcast and lowest priority interrupts consideration.
> +
> +
> +Implementation details
> +===================
> +- New variable to control VT-d PI
> +
> +Like variable 'iommu_intremap' for interrupt remapping, it is very 
> straightforward
> +to add a new one 'iommu_intpost' for posted-interrupt. 'iommu_intpost' is set
> +only when interrupt remapping and VT-d posted-interrupt are both enabled.
> +
> +- VT-d PI feature detection.
> +Bit 59 in VT-d Capability Register is used to report VT-d Posted-interrupt 
> support.
> +
> +- Extend posted-interrupt descriptor structure to cover VT-d PI specific 
> stuff.
> +Here is the new structure for posted-interrupt descriptor:
> +
> +struct pi_desc {
> +    DECLARE_BITMAP(pir, NR_VECTORS);
> +    union {
> +        struct
> +        {
> +        u16 on     : 1,  /* bit 256 - Outstanding Notification */
> +            sn     : 1,  /* bit 257 - Suppress Notification */
> +            rsvd_1 : 14; /* bit 271:258 - Reserved */
> +        u8  nv;          /* bit 279:272 - Notification Vector */
> +        u8  rsvd_2;      /* bit 287:280 - Reserved */
> +        u32 ndst;        /* bit 319:288 - Notification Destination */
> +        };
> +        u64 control;
> +    };
> +    u32 rsvd[6];
> +} __attribute__ ((aligned (64)));
> +
> +- Extend IRTE structure to support VT-d PI.
> +
> +Here is the new structure for IRTE:
> +/* interrupt remap entry */
> +struct iremap_entry {
> +  union {
> +    struct { u64 lo, hi; };
> +    struct {
> +        u16 p       : 1,
> +            fpd     : 1,
> +            dm      : 1,
> +            rh      : 1,
> +            tm      : 1,
> +            dlm     : 3,
> +            avail   : 4,
> +            res_1   : 4;
> +        u8  vector;
> +        u8  res_2;
> +        u32 dst;
> +        u16 sid;
> +        u16 sq      : 2,
> +            svt     : 2,
> +            res_3   : 12;
> +        u32 res_4   : 32;
> +    } remap;
> +    struct {
> +        u16 p       : 1,
> +            fpd     : 1,
> +            res_1   : 6,
> +            avail   : 4,
> +            res_2   : 2,
> +            urg     : 1,
> +            im      : 1;
> +        u8  vector;
> +        u8  res_3;
> +        u32 res_4   : 6,
> +            pda_l   : 26;
> +        u16 sid;
> +        u16 sq      : 2,
> +            svt     : 2,
> +            res_5   : 12;
> +        u32 pda_h;
> +    } post;
> +  };
> +};
> +
> +- Introduce a new global vector which is used to wake up the blocked vCPU.
> +
> +Currently, there is a global vector 'posted_intr_vector', which is used as 
> the
> +global notification vector for all vCPUs in the system. This vector is 
> stored in
> +VMCS and CPU considers it as a _special_ vector, uses it to notify the 
> related
> +pCPU when an interrupt is recorded in the posted-interrupt descriptor.
> +
> +This existing global vector is a _special_ vector to CPU, CPU handle it in a
> +_special_ way compared to normal vectors, please refer to 29.6 in Intel SDM
> +http://www.intel.com/content/dam/www/public/us/en/documents/manuals/64-ia-32-architectures-software-developer-manual-325462.pdf
> +for more information about how CPU handles it.
> +
> +After having VT-d PI, VT-d engine can issue notification event when the
> +assigned devices issue interrupts. We need add a new global vector to
> +wakeup the blocked vCPU, please refer to later section in this design for
> +how to use this new global vector.
> +
> +- Update IRTE when guest modifies the interrupt configuration (MSI/MSIx 
> configuration).
> +After VT-d PI is introduced, the format of IRTE is changed as follows:
> +     Descriptor Address: the address of the posted-interrupt descriptor
> +     Virtual Vector: the guest vector of the interrupt
> +     URG: indicates if the interrupt is urgent
> +     Other fields continue to have the same meaning
> +
> +'Descriptor Address' tells the destination vCPU of this interrupt, since
> +each vCPU has a dedicated posted-interrupt descriptor.
> +
> +'Virtual Vector' tells the guest vector of the interrupt.
> +
> +When guest changes the configuration of the interrupts, such as, the
> +cpu affinity, or the vector, we need to update the associated IRTE 
> accordingly.
> +
> +- Update posted-interrupt descriptor during vCPU scheduling
> +
> +The basic idea here is:
> +1. When vCPU's state is RUNSTATE_running,
> +        - Set 'NV' to 'posted_intr_vector'.
> +        - Clear 'SN' to accept posted-interrupts.
> +        - Set 'NDST' to the pCPU on which the vCPU will be running.
> +2. When vCPU's state is RUNSTATE_blocked,
> +        - Set 'NV' to ' pi_wakeup_vector ', so we can wake up the
> +          related vCPU when posted-interrupt happens for it.
> +          Please refer to the above section about the new global vector.
> +        - Clear 'SN' to accept posted-interrupts
> +3. When vCPU's state is RUNSTATE_runnable/RUNSTATE_offline,
> +        - Set 'SN' to suppress non-urgent interrupts
> +          (Current, we only support non-urgent interrupts)

s/Current/Currently/

or s/Current/Right now/


> +         When vCPU is in RUNSTATE_runnable or RUNSTATE_offline,

s/,//
> +         It is not needed to accept posted-interrupt notification event,

s/,//

> +         since we don't change the behavior of scheduler when the interrupt
> +         occurs, we still need wait the next scheduling of the vCPU.

s/wait the next/wait for the next/
> +         When external interrupts from assigned devices occur, the interrupts
> +         are recorded in PIR, and will be synced to IRR before VM-Entry.
> +        - Set 'NV' to 'posted_intr_vector'.
> +
> +- How to wakeup blocked vCPU when an interrupt is posted for it (wakeup 
> notification handler).
> +
> +Here is the scenario for the usage of the new global vector:
> +
> +1. vCPU0 is running on pCPU0
> +2. vCPU0 is blocked and vCPU1 is currently running on pCPU0
> +3. An external interrupt from an assigned device occurs for vCPU0, if we
> +still use 'posted_intr_vector' as the notification vector for vCPU0, the
> +notification event for vCPU0 (the event will go to pCPU1) will be consumed
> +by vCPU1 incorrectly (remember this is a special vector to CPU). The worst
> +case is that vCPU0 will never be woken up again since the wakeup event
> +for it is always consumed by other vCPUs incorrectly. So we need introduce
> +another global vector, naming 'pi_wakeup_vector' to wake up the blocked vCPU.
> +
> +After using 'pi_wakeup_vector' for vCPU0, VT-d engine will issue notification
> +event using this new vector. Since this new vector is not a SPECIAL one to 
> CPU,
> +it is just a normal vector. To cpu, it just receives an normal external 
> interrupt,

s/cpu/CPU/
> +then we can get control in the handler of this new vector. In this case, 
> hypervisor
> +can do something in it, such as wakeup the blocked vCPU.
> +
> +Here are what we do for the blocked vCPU:
> +1. Define a per-cpu list 'pi_blocked_vcpu', which stored the blocked
> +vCPU on the pCPU.
> +2. When the vCPU's state is changed to RUNSTATE_blocked, insert the vCPU
> +to the per-cpu list belonging to the pCPU it was running.
> +3. When the vCPU is unblocked, remove the vCPU from the related pCPU list.
> +
> +In the handler of 'pi_wakeup_vector', we do:
> +1. Get the physical CPU.
> +2. Iterate the list 'pi_blocked_vcpu' of the current pCPU, if 'ON' is set,
> +we unblock the associated vCPU.
> +
> +- New boot command line for Xen, which controls VT-d PI feature by user.
> +
> +Like 'intremap' for interrupt remapping, we add a new boot command line
> +'intpost' for posted-interrupts.
> +
> +- Multicast/broadcast and lowest priority interrupts consideration.
> +
> +With VT-d PI, the destination vCPU information of an external interrupt
> +from assigned devices is stored in IRTE, this makes the following
> +consideration of the design:
> +1. Multicast/broadcast interrupts cannot be posted.
> +2. For lowest-priority interrupts, new Intel CPU/Chipset/root-complex
> +(starting from Nehalem) ignore TPR value, and instead supported two other
> +ways (configurable by BIOS) on how the handle lowest priority interrupts:
> +     A) Round robin: In this method, the chipset simply delivers lowest 
> priority
> +interrupts in a round-robin manner across all the available logical CPUs. 
> While
> +this provides good load balancing, this was not the best thing to do always 
> as
> +interrupts from the same device (like NIC) will start running on all the CPUs
> +thrashing caches and taking locks. This led to the next scheme.
> +     B) Vector hashing: In this method, hardware would apply a hash function
> +on the vector value in the interrupt request, and use that hash to pick a 
> logical
> +CPU to route the lowest priority interrupt. This way, a given vector always 
> goes
> +to the same logical CPU, avoiding the thrashing problem above.
> +
> +So, gist of above is that, lowest priority interrupts has never been 
> delivered as
> +"lowest priority" in physical hardware.
> +
> +Vector hashing is used in this design.

And with those tiny little changes:

Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
> -- 
> 2.1.0
> 
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxx
> http://lists.xen.org/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.