Re: [Xen-devel] [osstest test] 60719: tolerable FAIL - PUSHED

[Jim Fehlig <jfehlig@xxxxxxxx>]

On 09/03/2015 05:37 AM, Ian Campbell wrote:
> On Thu, 2015-09-03 at 11:26 +0100, Ian Campbell wrote:
> > Notice that it has bound to 127.0.1.1 and not to 10.80.228.77!
> So while I investigate how to make d-i not create these entries I also
> removed the line from /etc/hosts such that looking up the FQDN gives the
> non-local IP. But:
>
>
>      root@moss-bug:/var/log# strace -o /tmp/virsh -fff virsh --debug 0 migrate 
> --live debian.guest.osstest xen+ssh    ://10.80.228.77
>      migrate: live(bool): (none)
>      migrate: domain(optdata): debian.guest.osstest
>      migrate: desturi(optdata): xen+ssh://10.80.228.77
>      migrate: found option <domain>: debian.guest.osstest
>      migrate: <domain> trying as domain NAME
>      migrate: found option <domain>: debian.guest.osstest
>      migrate: <domain> trying as domain NAME
>      error: internal error: Failed to send migration data to destination host
>
> The senders libxl-driver.log says:
>
> 2015-09-03 12:29:45 BST libxl-save-helper: debug: starting save: Success
> 2015-09-03 12:29:45 BST xc: detail: fd 27, dom 3, max_iters 0, max_factor 0, 
> flags 1, hvm 0
> 2015-09-03 12:29:45 BST xc: info: Saving domain 3, type x86 PV
> 2015-09-03 12:29:45 BST xc: detail: 64 bits, 4 levels
> 2015-09-03 12:29:45 BST xc: detail: max_pfn 0x1ffff, p2m_frames 256
> 2015-09-03 12:29:45 BST xc: detail: max_mfn 0x120000
> 2015-09-03 12:29:46 BST xc: error: Failed to write page data to stream (104 = 
> Connection reset by peer): Internal error
> 2015-09-03 12:29:46 BST xc: error: Save failed (104 = Connection reset by 
> peer): Internal error
> 2015-09-03 12:29:46 BST libxl-save-helper: debug: complete r=-1: Connection 
> reset by peer
> 2015-09-03 12:29:46 BST libxl: error: 
> libxl_stream_write.c:329:libxl__xc_domain_save_done: saving domain: domain did 
> not respond to suspend request: Connection reset by peer
> 2015-09-03 12:29:46 BST libxl: debug: libxl_event.c:1874:libxl__ao_complete: ao 
> 0x7f67b3f63e90: complete, rc=-8
> 2015-09-03 12:29:46 BST libxl: debug: libxl_event.c:1843:libxl__ao__destroy: ao 
> 0x7f67b3f63e90: destroy
> 2015-09-03 12:29:46 BST libxl: debug: libxl.c:526:libxl_domain_resume: ao 
> 0x7f67b3fa44b0: create: how=(nil) callback=(nil) poller=0x7f67a0002610
> 2015-09-03 12:29:46 BST xc: error: Dom 3 not suspended: (shutdown 0, reason 
> 255): Internal error
> 2015-09-03 12:29:46 BST libxl: error: 
> libxl_dom_suspend.c:409:libxl__domain_resume: xc_domain_resume failed for 
> domain 3: Invalid argument
> 2015-09-03 12:29:46 BST libxl: debug: libxl_event.c:1874:libxl__ao_complete: ao 
> 0x7f67b3fa44b0: complete, rc=-3
> 2015-09-03 12:29:46 BST libxl: debug: libxl.c:529:libxl_domain_resume: ao 
> 0x7f67b3fa44b0: inprogress: poller=0x7f67a0002610, flags=ic
> 2015-09-03 12:29:46 BST libxl: debug: libxl_event.c:1843:libxl__ao__destroy: ao 
> 0x7f67b3fa44b0: destroy
>
> While the receiver has:
>
> 2015-09-03 12:29:45 BST libxl-save-helper: debug: starting restore: Success
> 2015-09-03 12:29:45 BST xc: detail: fd 31, dom 4, hvm 0, pae 0, superpages 0, 
> checkpointed_stream 0
> 2015-09-03 12:29:45 BST xc: info: Found x86 PV domain from Xen 4.6
> 2015-09-03 12:29:45 BST xc: info: Restoring domain
> 2015-09-03 12:29:45 BST xc: detail: 64 bits, 4 levels
> 2015-09-03 12:29:45 BST xc: detail: max_mfn 0x120000
> 2015-09-03 12:29:45 BST xc: detail: Expanded p2m from 0 to 0x1ffff
> 2015-09-03 12:29:45 BST xc: error: Failed to read 4202504 bytes of data for 
> record (0x00000001, Page data) (11 = Resource temporarily unavailabl): Internal 
> error
> 2015-09-03 12:29:45 BST xc: error: Restore failed (11 = Resource temporarily 
> unavailabl): Internal error
> 2015-09-03 12:29:45 BST libxl-save-helper: debug: complete r=-1: Resource 
> temporarily unavailable
> 2015-09-03 12:29:45 BST libxl: error: 
> libxl_stream_read.c:749:libxl__xc_domain_restore_done: restoring domain: 
> Resource temporarily unavailable
> 2015-09-03 12:29:45 BST libxl: error: 
> libxl_create.c:1141:domcreate_rebuild_done: cannot (re-)build domain: -3
> 2015-09-03 12:29:46 BST libxl: debug: libxl.c:1708:devices_destroy_cb: forked 
> pid 18738 for destroy of domain 4
> 2015-09-03 12:29:46 BST libxl: debug: libxl_event.c:1874:libxl__ao_complete: ao 
> 0x7fbb7687e900: complete, rc=-3
> 2015-09-03 12:29:46 BST libxl: debug: libxl_event.c:1843:libxl__ao__destroy: ao 
> 0x7fbb7687e900: destroy
>
>
> "xc: error: Failed to write page data to stream (104 = Connection reset by
> peer): Internal error" seems to be the initial failure.
I wonder if this has anything to do with migration V2? I noticed a migration 
regression a few days back, but later realized that the sender was 4.5 and 
receiver was 4.6. I planned to see if migration worked through libvirt between 
two 4.6 hosts, but before doing so I had to re-purpose the machines for another 
task. I think libvirt needs some work to accommodate migration V2...
Regards,
Jim


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel