|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v3 6/9] xen/blkfront: negotiate the number of hw queues/rings with backend
The max number of hardware queues for xen/blkfront is set by parameter
'max_queues', while the number xen/blkback supported is notified through
xenstore("multi-queue-max-queues").
The negotiated number was the smaller one, and was written back to
xen/blkback as "multi-queue-num-queues".
Signed-off-by: Bob Liu <bob.liu@xxxxxxxxxx>
---
drivers/block/xen-blkfront.c | 142 ++++++++++++++++++++++++++++++++----------
1 file changed, 108 insertions(+), 34 deletions(-)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 1cae76b..1aa66c9 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -107,6 +107,10 @@ static unsigned int xen_blkif_max_ring_order;
module_param_named(max_ring_page_order, xen_blkif_max_ring_order, int,
S_IRUGO);
MODULE_PARM_DESC(max_ring_page_order, "Maximum order of pages to be used for
the shared ring");
+static unsigned int xen_blkif_max_queues;
+module_param_named(max_queues, xen_blkif_max_queues, uint, S_IRUGO);
+MODULE_PARM_DESC(max_queues, "Maximum number of hardware queues/rings per
virtual disk");
+
#define BLK_RING_SIZE(dinfo) __CONST_RING_SIZE(blkif, PAGE_SIZE *
(dinfo)->pages_per_ring)
#define BLK_MAX_RING_SIZE __CONST_RING_SIZE(blkif, PAGE_SIZE *
XENBUS_MAX_RING_PAGES)
/*
@@ -114,6 +118,7 @@ MODULE_PARM_DESC(max_ring_page_order, "Maximum order of
pages to be used for the
* characters are enough. Define to 20 to keep consist with backend.
*/
#define RINGREF_NAME_LEN (20)
+#define QUEUE_NAME_LEN (12)
/*
* Per-ring info.
@@ -687,7 +692,7 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16
sector_size,
memset(&dinfo->tag_set, 0, sizeof(dinfo->tag_set));
dinfo->tag_set.ops = &blkfront_mq_ops;
- dinfo->tag_set.nr_hw_queues = 1;
+ dinfo->tag_set.nr_hw_queues = dinfo->nr_rings;
dinfo->tag_set.queue_depth = BLK_RING_SIZE(dinfo);
dinfo->tag_set.numa_node = NUMA_NO_NODE;
dinfo->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_SG_MERGE;
@@ -1350,6 +1355,51 @@ fail:
return err;
}
+static int write_per_ring_nodes(struct xenbus_transaction xbt,
+ struct blkfront_ring_info *rinfo, const char
*dir)
+{
+ int err, i;
+ const char *message = NULL;
+ struct blkfront_dev_info *dinfo = rinfo->dinfo;
+
+ if (dinfo->pages_per_ring == 1) {
+ err = xenbus_printf(xbt, dir, "ring-ref", "%u",
rinfo->ring_ref[0]);
+ if (err) {
+ message = "writing ring-ref";
+ goto abort_transaction;
+ }
+ pr_info("%s: write ring-ref:%d\n", dir, rinfo->ring_ref[0]);
+ } else {
+ for (i = 0; i < dinfo->pages_per_ring; i++) {
+ char ring_ref_name[RINGREF_NAME_LEN];
+
+ snprintf(ring_ref_name, RINGREF_NAME_LEN, "ring-ref%u",
i);
+ err = xenbus_printf(xbt, dir, ring_ref_name,
+ "%u", rinfo->ring_ref[i]);
+ if (err) {
+ message = "writing ring-ref";
+ goto abort_transaction;
+ }
+ pr_info("%s: write ring-ref:%d\n", dir,
rinfo->ring_ref[i]);
+ }
+ }
+
+ err = xenbus_printf(xbt, dir, "event-channel", "%u", rinfo->evtchn);
+ if (err) {
+ message = "writing event-channel";
+ goto abort_transaction;
+ }
+ pr_info("%s: write event-channel:%d\n", dir, rinfo->evtchn);
+
+ return 0;
+
+abort_transaction:
+ xenbus_transaction_end(xbt, 1);
+ if (message)
+ xenbus_dev_fatal(dinfo->xbdev, err, "%s", message);
+
+ return err;
+}
/* Common code used when first setting up, and when resuming. */
static int talk_to_blkback(struct xenbus_device *dev,
@@ -1386,45 +1436,51 @@ again:
goto out;
}
+ if (dinfo->pages_per_ring > 1) {
+ err = xenbus_printf(xbt, dev->nodename, "ring-page-order", "%u",
+ ring_page_order);
+ if (err) {
+ message = "writing ring-page-order";
+ goto abort_transaction;
+ }
+ }
+
+ /* We already got the number of queues in _probe */
if (dinfo->nr_rings == 1) {
rinfo = &dinfo->rinfo[0];
- if (dinfo->pages_per_ring == 1) {
- err = xenbus_printf(xbt, dev->nodename,
- "ring-ref", "%u",
rinfo->ring_ref[0]);
- if (err) {
- message = "writing ring-ref";
- goto abort_transaction;
- }
- } else {
- err = xenbus_printf(xbt, dev->nodename,
- "ring-page-order", "%u",
ring_page_order);
- if (err) {
- message = "writing ring-page-order";
- goto abort_transaction;
- }
-
- for (i = 0; i < dinfo->pages_per_ring; i++) {
- char ring_ref_name[RINGREF_NAME_LEN];
+ err = write_per_ring_nodes(xbt, &dinfo->rinfo[0],
dev->nodename);
+ if (err)
+ goto out;
+ } else {
+ char *path;
+ size_t pathsize;
- snprintf(ring_ref_name, RINGREF_NAME_LEN,
"ring-ref%u", i);
- err = xenbus_printf(xbt, dev->nodename,
ring_ref_name,
- "%u", rinfo->ring_ref[i]);
- if (err) {
- message = "writing ring-ref";
- goto abort_transaction;
- }
- }
- }
- err = xenbus_printf(xbt, dev->nodename,
- "event-channel", "%u", rinfo->evtchn);
+ err = xenbus_printf(xbt, dev->nodename,
"multi-queue-num-queues", "%u",
+ dinfo->nr_rings);
if (err) {
- message = "writing event-channel";
+ message = "writing multi-queue-num-queues";
goto abort_transaction;
}
- } else {
- /* Not supported at this stage */
- goto abort_transaction;
+
+ pathsize = strlen(dev->nodename) + QUEUE_NAME_LEN;
+ path = kzalloc(pathsize, GFP_KERNEL);
+ if (!path) {
+ err = -ENOMEM;
+ message = "ENOMEM while writing ring references";
+ goto abort_transaction;
+ }
+
+ for (i = 0; i < dinfo->nr_rings; i++) {
+ memset(path, 0, pathsize);
+ snprintf(path, pathsize, "%s/queue-%u", dev->nodename,
i);
+ err = write_per_ring_nodes(xbt, &dinfo->rinfo[i], path);
+ if (err) {
+ kfree(path);
+ goto out;
+ }
+ }
+ kfree(path);
}
err = xenbus_printf(xbt, dev->nodename, "protocol", "%s",
@@ -1480,6 +1536,7 @@ static int blkfront_probe(struct xenbus_device *dev,
int err, vdevice, r_index;
struct blkfront_dev_info *dinfo;
struct blkfront_ring_info *rinfo;
+ unsigned int back_max_queues = 0;
/* FIXME: Use dynamic device id if this is not set. */
err = xenbus_scanf(XBT_NIL, dev->nodename,
@@ -1534,7 +1591,17 @@ static int blkfront_probe(struct xenbus_device *dev,
dinfo->vdevice = vdevice;
dinfo->connected = BLKIF_STATE_DISCONNECTED;
- dinfo->nr_rings = 1;
+ /* Check if backend supports multiple queues */
+ err = xenbus_scanf(XBT_NIL, dinfo->xbdev->otherend,
+ "multi-queue-max-queues", "%u", &back_max_queues);
+ if (err < 0)
+ back_max_queues = 1;
+
+ dinfo->nr_rings = min(back_max_queues, xen_blkif_max_queues);
+ if (dinfo->nr_rings <= 0)
+ dinfo->nr_rings = 1;
+ pr_info("dinfo->nr_rings:%u, backend support max-queues:%u\n",
dinfo->nr_rings, back_max_queues);
+
dinfo->rinfo = kzalloc(sizeof(*rinfo) * dinfo->nr_rings, GFP_KERNEL);
if (!dinfo->rinfo) {
xenbus_dev_fatal(dev, -ENOMEM, "allocating ring_info
structure");
@@ -2257,6 +2324,7 @@ static struct xenbus_driver blkfront_driver = {
static int __init xlblk_init(void)
{
int ret;
+ int nr_cpus = num_online_cpus();
if (!xen_domain())
return -ENODEV;
@@ -2267,6 +2335,12 @@ static int __init xlblk_init(void)
xen_blkif_max_ring_order = 0;
}
+ if (xen_blkif_max_queues > nr_cpus) {
+ pr_info("Invalid max_queues (%d), will use default max: %d.\n",
+ xen_blkif_max_queues, nr_cpus);
+ xen_blkif_max_queues = nr_cpus;
+ }
+
if (!xen_has_pv_disk_devices())
return -ENODEV;
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |