[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v2] arm: reduce power use by contented spin locks with WFE/SEV



On Mon, 2015-08-03 at 12:29 +0100, Ian Campbell wrote:
> From: David Vrabel <david.vrabel@xxxxxxxxxx>
> 
> Instead of cpu_relax() while spinning and observing the ticket head,
> introduce arch_lock_relax() which executes a WFE instruction.  After
> the ticket head is changed call arch_lock_signal() to execute an SEV
> instruction (with the required DSB first) to wake any spinners.
> 
> This should improve power consumption when locks are contented and
> spinning.
> 
> For consistency also move arch_lock_(acquire|release)_barrier to
> asm/spinlock.h.
> 
> Booted the result on arm32 (Midway) and arm64 (Mustang). Build test
> only on amd64.
> 
> Signed-off-by: David Vrabel <david.vrabel@xxxxxxxxxx>
> [ijc: add barrier, rename as arch_lock_*, move arch_lock_*_barrier, test]
> Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
> Cc: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
> Cc: Jan Beulich <jbeulich@xxxxxxxx>
> Cc: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>

Andy has Reviewed-by but this change still lacks an Ack from the ARM side.
Stefano, was your previous "The code should work though." intended as an
Ack?

> ---
> v2 (ijc):
>   Add dsb(ishst) to spin_relax.
>   s/spin_(relax|signal)/arch_lock_\1/
>   Move arch_lock_(acquire|release)_barrier to asm/spinlock.h
>       (dropped Andy's Reviewed-by due to this change)
> 
> In principal the SEV could be made unnecessary on arm64, but this
> requires a new hook before the wait loop as well as changing
> observe_head and _spin_unlock to use the Acquire/Release instructions
> instead of the non-atomic loads and stores used today, which is a lot
> more refactoring of the generic code than I think we can be bothered
> with at this stage.
> 
> 4.6: I'm in two minds about this, the lack of WFE in the ticket
> spinlocks is not a regression (the old locks lacked them as well,
> oops!). On the otherhand spinning like this isn't good. I think
> overall I'm inclined to say this should wait for 4.7 but be a
> candidate for backport to 4.6.1.
> ---
>  xen/common/spinlock.c          |  5 +++--
>  xen/include/asm-arm/spinlock.h |  9 ++++++++-
>  xen/include/asm-arm/system.h   |  3 ---
>  xen/include/asm-x86/spinlock.h | 14 ++++++++++++++
>  xen/include/asm-x86/system.h   | 11 -----------
>  5 files changed, 25 insertions(+), 17 deletions(-)
> 
> diff --git a/xen/common/spinlock.c b/xen/common/spinlock.c
> index 29149d1..7f89694 100644
> --- a/xen/common/spinlock.c
> +++ b/xen/common/spinlock.c
> @@ -141,7 +141,7 @@ void _spin_lock(spinlock_t *lock)
>      while ( tickets.tail != observe_head(&lock->tickets) )
>      {
>          LOCK_PROFILE_BLOCK;
> -        cpu_relax();
> +        arch_lock_relax();
>      }
>      LOCK_PROFILE_GOT;
>      preempt_disable();
> @@ -170,6 +170,7 @@ void _spin_unlock(spinlock_t *lock)
>      preempt_enable();
>      LOCK_PROFILE_REL;
>      add_sized(&lock->tickets.head, 1);
> +    arch_lock_signal();
>  }
>  
>  void _spin_unlock_irq(spinlock_t *lock)
> @@ -228,7 +229,7 @@ void _spin_barrier(spinlock_t *lock)
>      if ( sample.head != sample.tail )
>      {
>          while ( observe_head(&lock->tickets) == sample.head )
> -            cpu_relax();
> +            arch_lock_relax();
>  #ifdef LOCK_PROFILE
>          if ( lock->profile )
>          {
> diff --git a/xen/include/asm-arm/spinlock.h b/xen/include/asm
> -arm/spinlock.h
> index 81955d1..8cdf9e1 100644
> --- a/xen/include/asm-arm/spinlock.h
> +++ b/xen/include/asm-arm/spinlock.h
> @@ -1,6 +1,13 @@
>  #ifndef __ASM_SPINLOCK_H
>  #define __ASM_SPINLOCK_H
>  
> -/* Nothing ARM specific. */
> +#define arch_lock_acquire_barrier() smp_mb()
> +#define arch_lock_release_barrier() smp_mb()
> +
> +#define arch_lock_relax() wfe()
> +#define arch_lock_signal() do { \
> +    dsb(ishst);                 \
> +    sev();                      \
> +} while(0)
>  
>  #endif /* __ASM_SPINLOCK_H */
> diff --git a/xen/include/asm-arm/system.h b/xen/include/asm-arm/system.h
> index f0e222f..2eb96e8 100644
> --- a/xen/include/asm-arm/system.h
> +++ b/xen/include/asm-arm/system.h
> @@ -53,9 +53,6 @@
>  
>  #define arch_fetch_and_add(x, v) __sync_fetch_and_add(x, v)
>  
> -#define arch_lock_acquire_barrier() smp_mb()
> -#define arch_lock_release_barrier() smp_mb()
> -
>  extern struct vcpu *__context_switch(struct vcpu *prev, struct vcpu
> *next);
>  
>  #endif
> diff --git a/xen/include/asm-x86/spinlock.h b/xen/include/asm
> -x86/spinlock.h
> index 7d69e75..70a85af 100644
> --- a/xen/include/asm-x86/spinlock.h
> +++ b/xen/include/asm-x86/spinlock.h
> @@ -4,4 +4,18 @@
>  #define _raw_read_unlock(l) \
>      asm volatile ( "lock; dec%z0 %0" : "+m" ((l)->lock) :: "memory" )
>  
> +/*
> + * On x86 the only reordering is of reads with older writes.  In the
> + * lock case, the read in observe_head() can only be reordered with
> + * writes that precede it, and moving a write _into_ a locked section
> + * is OK.  In the release case, the write in add_sized() can only be
> + * reordered with reads that follow it, and hoisting a read _into_ a
> + * locked region is OK.
> + */
> +#define arch_lock_acquire_barrier() barrier()
> +#define arch_lock_release_barrier() barrier()
> +
> +#define arch_lock_relax() cpu_relax()
> +#define arch_lock_signal()
> +
>  #endif /* __ASM_SPINLOCK_H */
> diff --git a/xen/include/asm-x86/system.h b/xen/include/asm-x86/system.h
> index 25a6a2a..9fb70f5 100644
> --- a/xen/include/asm-x86/system.h
> +++ b/xen/include/asm-x86/system.h
> @@ -185,17 +185,6 @@ static always_inline unsigned long __xadd(
>  #define set_mb(var, value) do { xchg(&var, value); } while (0)
>  #define set_wmb(var, value) do { var = value; wmb(); } while (0)
>  
> -/*
> - * On x86 the only reordering is of reads with older writes.  In the
> - * lock case, the read in observe_head() can only be reordered with
> - * writes that precede it, and moving a write _into_ a locked section
> - * is OK.  In the release case, the write in add_sized() can only be
> - * reordered with reads that follow it, and hoisting a read _into_ a
> - * locked region is OK.
> - */
> -#define arch_lock_acquire_barrier() barrier()
> -#define arch_lock_release_barrier() barrier()
> -
>  #define local_irq_disable()     asm volatile ( "cli" : : : "memory" )
>  #define local_irq_enable()      asm volatile ( "sti" : : : "memory" )
>  

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.