[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [Qemu-devel] Question about xen disk unplug support for ahci missed in qemu
On 10/19/2015 07:44 AM, Stefano Stabellini wrote: > On Mon, 19 Oct 2015, Gerd Hoffmann wrote: >> Hi, >> >>>> I'm trying to follow this discussion as best as I am able, but my lack >>>> of experience with Xen prevents me from really participating in a >>>> meaningful way. >>>> >>>> (I see that Laszlo is still discussing some CD-ROM issues with Fabio >>>> which may be of interest to me...) >>>> >>>> At any rate, I won't be authoring any Xen-specific hacks to the AHCI >>>> device, but I do have plans to implement hot-plugging emulation as per >>>> the AHCI spec. Perhaps this is sufficient for the Xen layer, but someone >>>> else will need to author the appropriate glue code. >>>> >>>> If "real" hot-plugging is not sufficient, we'll need to discuss further, >>>> preferably over some RFC patches. >>> >>> That's fine. AHCI hot-plugging would go a long way and once we have >>> that, the rest is easy. >> >> Can we get some more background on this? >> >> IIRC the IDE bits are needed to boot hvm guests, which goes like this: >> >> (1) boot disk is hooked up using both xenbus and ide. >> (2) seabios boots using ide. >> (3) linux kernel activates xenbus, at which point qemu zaps the ide >> disks to avoid the disk being present twice in the system. >> >> Correct? >> >> Do we really want repeat this exercise for AHCI? Alot has changed since >> this boot hack for ide was added ... >> >> As far I know OVMF has xenbus drivers, so OVMF should already boot xen >> guests just fine without this, correct? > > I agree with you that the current unplug in nasty. Also I don't care > much about AHCI, in fact I don't think we should be spending efforts > into making that scenario work better. I think we should be working on > OVMF instead and fix the bug about empty cdrom drives reported by Fabio. > OVMF and AHCI go hand in hand here from my viewpoint. I'm happy to debug any OVMF+SATA/AHCI problems that are reported. Last I saw, Laszlo asked Fabio for some more information on this problem, so I am waiting for that information to start work on that issue. Thanks, --js > >> Can we just have xenbus drivers for seabios too? seabios can run disk >> drivers in 32bit mode meanwhile, so this should not be as difficult any >> more as it used to be. > > Sure, I would be happy to see that happen, but I won't be working on it. > _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |