|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH V8 7/7] domcreate: support pvusb in configuration file
Add code to support pvusb in domain config file. One could specify
usbctrl and usb in domain's configuration file and create domain,
then usb controllers will be created and usb device would be attached
to guest automatically.
One could specify usb controllers and usb devices in config file
like this:
usbctrl=['version=2,ports=4', 'version=1, ports=4', ]
usbdev=['hostbus=2, hostaddr=1, controller=0,port=1', ]
Signed-off-by: Chunyan Liu <cyliu@xxxxxxxx>
Signed-off-by: Simon Cao <caobosimon@xxxxxxxxx>
---
changes:
- change parse_usb_config and parse_usbctrl_config, following
parse_nic_config way, and move to previous patch
- update user interface to specify hostbus, hostaddr instead of
hostbus.hostaddr for future extension
docs/man/xl.cfg.pod.5 | 81 ++++++++++++++++++++++++++++++++++++++++++++
tools/libxl/libxl_create.c | 73 +++++++++++++++++++++++++++++++++++++--
tools/libxl/libxl_device.c | 4 +++
tools/libxl/libxl_internal.h | 8 +++++
tools/libxl/xl_cmdimpl.c | 54 ++++++++++++++++++++++++++++-
5 files changed, 216 insertions(+), 4 deletions(-)
diff --git a/docs/man/xl.cfg.pod.5 b/docs/man/xl.cfg.pod.5
index b63846a..f24c008 100644
--- a/docs/man/xl.cfg.pod.5
+++ b/docs/man/xl.cfg.pod.5
@@ -722,6 +722,87 @@ Note this may be overridden by rdm_policy option in PCI
device configuration.
=back
+=item B<usbctrl=[ "USBCTRL_SPEC_STRING", "USBCTRL_SPEC_STRING", ... ]>
+
+Specifies the USB controllers created for this guest. Each
+B<USB_SPEC_STRING> has the form C<KEY=VALUE,KEY=VALUE,...> where:
+
+=over 4
+
+=item B<KEY=VALUE>
+
+Possible B<KEY>s are:
+
+=over 4
+
+=item B<type=TYPE>
+
+Specifies the protocol to implement USB controller, could be "pv" (indicates
+PVUSB) or "qemu" (indicates QEMU emulated). Currently only "pv" is supported.
+
+=item B<version=VERSION>
+
+Specifies version of the USB controller, could be 1 (USB1.1) or 2 (USB2.0).
+Default is 2 (USB2.0).
+
+=item B<ports=PORTS>
+
+Specifies port number of the USB controller. Default is 8.
+
+Each USB controller will have an index starting from 0. On the same
+controller, each port will have an index starting from 1.
+
+E.g.
+usbctrl=["version=1,ports=4", "version=2,ports=8",]
+The first controller has:
+controller index = 0, and port 1,2,3,4.
+The second controller has:
+controller index = 1, and port 1,2,3,4,5,6,7,8.
+
+=back
+
+=back
+
+=item B<usbdev=[ "USB_SPEC_STRING", "USB_SPEC_STRING", ... ]>
+
+Specifies the host USB devices to passthrough to this guest. Each
+B<USB_SPEC_STRING> has the form C<KEY=VALUE,KEY=VALUE,...> where:
+
+=over 4
+
+=item B<KEY=VALUE>
+
+Possible B<KEY>s are:
+
+=over 4
+
+=item B<devtype=hostdev>
+
+Specifies USB device type. Currently only support 'hostdev'.
+
+=item B<hostbus=busnum>
+
+Specifies busnum of the USB device from the host perspective.
+
+=item B<hostaddr=devnum>
+
+Specifies devnum of the USB device from the host perspective.
+
+=item B<controller=CONTROLLER>
+
+Specifies USB controller index, to which controller the USB device is attached.
+
+=item B<port=PORT>
+
+Specifies USB port index, to which port the USB device is attached.
B<port=PORT>
+is valid only when B<controller=CONTROLLER> is specified. Without
+B<controller=CONTROLLER>, it will find the first available USB controller:port
+and use it. If there is no controller at all, it will create one.
+
+=back
+
+=back
+
=item B<pci=[ "PCI_SPEC_STRING", "PCI_SPEC_STRING", ... ]>
Specifies the host PCI devices to passthrough to this guest. Each
B<PCI_SPEC_STRING>
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index f0fee00..f817187 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -727,6 +727,10 @@ static void domcreate_launch_dm(libxl__egc *egc,
libxl__multidev *aodevs,
static void domcreate_attach_vtpms(libxl__egc *egc, libxl__multidev *multidev,
int ret);
+static void domcreate_attach_usbctrls(libxl__egc *egc,
+ libxl__multidev *multidev, int ret);
+static void domcreate_attach_usbs(libxl__egc *egc, libxl__multidev *multidev,
+ int ret);
static void domcreate_attach_pci(libxl__egc *egc, libxl__multidev *aodevs,
int ret);
static void domcreate_attach_dtdev(libxl__egc *egc,
@@ -1385,13 +1389,13 @@ static void domcreate_attach_vtpms(libxl__egc *egc,
if (d_config->num_vtpms > 0) {
/* Attach vtpms */
libxl__multidev_begin(ao, &dcs->multidev);
- dcs->multidev.callback = domcreate_attach_pci;
+ dcs->multidev.callback = domcreate_attach_usbctrls;
libxl__add_vtpms(egc, ao, domid, d_config, &dcs->multidev);
libxl__multidev_prepared(egc, &dcs->multidev, 0);
return;
}
- domcreate_attach_pci(egc, multidev, 0);
+ domcreate_attach_usbctrls(egc, multidev, 0);
return;
error_out:
@@ -1399,6 +1403,69 @@ error_out:
domcreate_complete(egc, dcs, ret);
}
+static void domcreate_attach_usbctrls(libxl__egc *egc,
+ libxl__multidev *multidev, int ret)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(multidev, *dcs, multidev);
+ STATE_AO_GC(dcs->ao);
+ int domid = dcs->guest_domid;
+
+ libxl_domain_config *const d_config = dcs->guest_config;
+
+ if (ret) {
+ LOG(ERROR, "unable to add vtpm devices");
+ goto error_out;
+ }
+
+ if (d_config->num_usbctrls > 0) {
+ /* Attach usbctrls */
+ libxl__multidev_begin(ao, &dcs->multidev);
+ dcs->multidev.callback = domcreate_attach_usbs;
+ libxl__add_usbctrls(egc, ao, domid, d_config, &dcs->multidev);
+ libxl__multidev_prepared(egc, &dcs->multidev, 0);
+ return;
+ }
+
+ domcreate_attach_usbs(egc, multidev, 0);
+ return;
+
+error_out:
+ assert(ret);
+ domcreate_complete(egc, dcs, ret);
+}
+
+
+static void domcreate_attach_usbs(libxl__egc *egc, libxl__multidev *multidev,
+ int ret)
+{
+ libxl__domain_create_state *dcs = CONTAINER_OF(multidev, *dcs, multidev);
+ STATE_AO_GC(dcs->ao);
+ int domid = dcs->guest_domid;
+
+ libxl_domain_config *const d_config = dcs->guest_config;
+
+ if (ret) {
+ LOG(ERROR, "unable to add usbctrl devices");
+ goto error_out;
+ }
+
+ if (d_config->num_usbs > 0) {
+ /* Attach usbctrls */
+ libxl__multidev_begin(ao, &dcs->multidev);
+ dcs->multidev.callback = domcreate_attach_pci;
+ libxl__add_usbs(egc, ao, domid, d_config, &dcs->multidev);
+ libxl__multidev_prepared(egc, &dcs->multidev, 0);
+ return;
+ }
+
+ domcreate_attach_pci(egc, multidev, 0);
+ return;
+
+error_out:
+ assert(ret);
+ domcreate_complete(egc, dcs, ret);
+}
+
static void domcreate_attach_pci(libxl__egc *egc, libxl__multidev *multidev,
int ret)
{
@@ -1411,7 +1478,7 @@ static void domcreate_attach_pci(libxl__egc *egc,
libxl__multidev *multidev,
libxl_domain_config *const d_config = dcs->guest_config;
if (ret) {
- LOG(ERROR, "unable to add vtpm devices");
+ LOG(ERROR, "unable to add usb devices");
goto error_out;
}
diff --git a/tools/libxl/libxl_device.c b/tools/libxl/libxl_device.c
index 6715c16..0ede029 100644
--- a/tools/libxl/libxl_device.c
+++ b/tools/libxl/libxl_device.c
@@ -544,6 +544,8 @@ void libxl__multidev_prepared(libxl__egc *egc,
* libxl__add_disks
* libxl__add_nics
* libxl__add_vtpms
+ * libxl__add_usbctrls
+ * libxl__add_usbs
*/
#define DEFINE_DEVICES_ADD(type) \
@@ -563,6 +565,8 @@ void libxl__multidev_prepared(libxl__egc *egc,
DEFINE_DEVICES_ADD(disk)
DEFINE_DEVICES_ADD(nic)
DEFINE_DEVICES_ADD(vtpm)
+DEFINE_DEVICES_ADD(usbctrl)
+DEFINE_DEVICES_ADD(usb)
#undef DEFINE_DEVICES_ADD
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 1aa0aaf..4d18cbc 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -3302,6 +3302,14 @@ _hidden void libxl__add_vtpms(libxl__egc *egc, libxl__ao
*ao, uint32_t domid,
libxl_domain_config *d_config,
libxl__multidev *multidev);
+_hidden void libxl__add_usbctrls(libxl__egc *egc, libxl__ao *ao,
+ uint32_t domid, libxl_domain_config *d_config,
+ libxl__multidev *multidev);
+
+_hidden void libxl__add_usbs(libxl__egc *egc, libxl__ao *ao,
+ uint32_t domid, libxl_domain_config *d_config,
+ libxl__multidev *multidev);
+
/*----- device model creation -----*/
/* First layer; wraps libxl__spawn_spawn. */
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index 33df66b..88958d2 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -1321,7 +1321,8 @@ static void parse_config_data(const char *config_source,
const char *buf;
long l, vcpus = 0;
XLU_Config *config;
- XLU_ConfigList *cpus, *vbds, *nics, *pcis, *cvfbs, *cpuids, *vtpms;
+ XLU_ConfigList *cpus, *vbds, *nics, *pcis, *cvfbs, *cpuids, *vtpms,
+ *usbctrls, *usbs;
XLU_ConfigList *channels, *ioports, *irqs, *iomem, *viridian, *dtdevs;
int num_ioports, num_irqs, num_iomem, num_cpus, num_viridian;
int pci_power_mgmt = 0;
@@ -2138,6 +2139,57 @@ skip_vfb:
}
}
+ if (!xlu_cfg_get_list(config, "usbctrl", &usbctrls, 0, 0)) {
+ d_config->num_usbctrls = 0;
+ d_config->usbctrls = NULL;
+ while ((buf = xlu_cfg_get_listitem(usbctrls, d_config->num_usbctrls))
+ != NULL) {
+ libxl_device_usbctrl *usbctrl;
+ char *buf2 = strdup(buf);
+ char *p;
+
+ usbctrl = ARRAY_EXTEND_INIT(d_config->usbctrls,
+ d_config->num_usbctrls,
+ libxl_device_usbctrl_init);
+ p = strtok(buf2, ",");
+ if (!p)
+ goto skip_usbctrl;
+ do {
+ while (*p == ' ')
+ p++;
+ if (parse_usbctrl_config(usbctrl, p))
+ exit(1);
+ } while ((p = strtok(NULL, ",")) != NULL);
+skip_usbctrl:
+ free(buf2);
+ }
+ }
+
+ if (!xlu_cfg_get_list(config, "usbdev", &usbs, 0, 0)) {
+ d_config->num_usbs = 0;
+ d_config->usbs = NULL;
+ while ((buf = xlu_cfg_get_listitem(usbs, d_config->num_usbs)) != NULL)
{
+ libxl_device_usb *usb;
+ char *buf2 = strdup(buf);
+ char *p;
+
+ usb = ARRAY_EXTEND_INIT_NODEVID(d_config->usbs,
+ d_config->num_usbs,
+ libxl_device_usb_init);
+ p = strtok(buf2, ",");
+ if (!p)
+ goto skip_usb;
+ do {
+ while (*p == ' ')
+ p++;
+ if (parse_usb_config(usb, p))
+ exit(1);
+ } while ((p = strtok(NULL, ",")) != NULL);
+skip_usb:
+ free(buf2);
+ }
+ }
+
switch (xlu_cfg_get_list(config, "cpuid", &cpuids, 0, 1)) {
case 0:
{
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |