Re: [Xen-devel] arm64: iomem_resource doesn't contain all the region used

[Julien Grall <julien.grall@xxxxxxxxxx>]

On 30/10/15 17:53, Daniel Kiper wrote:
> Hey Julien,

Hi,

> On Thu, Oct 29, 2015 at 05:24:42PM +0000, Julien Grall wrote:
>> Hi Daniel,
>>
>> On 29/10/15 16:36, Daniel Kiper wrote:
>>> On Wed, Oct 28, 2015 at 05:32:54PM +0000, Julien Grall wrote:
>>>> (Adding David and Daniel)
>>>>
>>>> On 23/10/15 16:45, Ian Campbell wrote:
>>>>> On Fri, 2015-10-23 at 15:58 +0100, Julien Grall wrote:
>>>>>> Is there any way we could register the IO region used on ARM without
>>>>>> having to enforce it in all the drivers?
>>>>>
>>>>> This seems like an uphill battle to me.
>>>>
>>>> I agree about it. However this is how x86 handle memory hotplug for xen
>>>> ballooning. I'm wondering how this is cannot an problem for x86?
>>>>
>>>> Note that the problem is the same if a module is insert after hand.
>>>
>>> Does ARM64 support memory hotplug on bare metal? If yes then check relevant
>>> code and do what should be done as close as possible to bare metal case
>>> on Xen guest.
>>
>> AFAICT, There is no support memory hotplug for ARM64 in Linux today.
> 
> Are there any plans for it? Is anybody working on that stuff?

I'm not aware of any plan. But I started to look at it and adding
arch_add_memory (the arch-specific function required to support memory
hotplug) should be pretty easy. It's a matter of few lines of code.

> 
>>>>> In terms of domU the "potential" RAM is defined by the domain builder
>>>>> layout (currently the two banks mentioned in Xen's arch-arm.h).
>>>>
>>>> ... the DOMU one is more complex (see above). Today the guest layout is
>>>> static, I wouldn't be surprised to see it becoming dynamic very soon (I
>>>> have in mind PCI hotplug) and therefore defining static hotplug region
>>>> would not possible.
>>>
>>> Please do not do that. I think that memory hotplug should not be limited
>>> by anything but just a given platform limitations. By the way, could you
>>> explain in details why linux/mm/memory_hotplug.c:register_memory_resource()
>>> will not work on ARM64 guest?
>>
>> Sorry I should have CCed you on the first mail where I explained the
>> problem.
> 
> No problem. Thanks for explanation.
> 
>> The problem is not register_memory_resource but how the balloon code is
>> finding a free region in the address patch. With the patch [1] which
>> should land in Linux 4.4, the balloon code will look for a free region
>> within the iomem_resource. This means that we expect all the region used
>> (or will be used in the case the driver is loaded later) by a device are
>> registered.
>>
>> However, on ARM64, only a handful of drivers are effectively registering
>> the I/O region.
>>
>> Any drivers using directly ioremap* or of_iomap (the ioremap version
>> using the device tree node in parameter) won't register the I/O region used.
>>
>> For instance on the board I'm using not even 10% of the I/O region are
>> registered:
>>
>> 42sh> cat /proc/iomem
>>
>> 10510000-105103ff : /soc/rtc@10510000
>> 1a400000-1a400fff : /soc/sata@1a400000
>> 1a800000-1a800fff : /soc/sata@1a800000
>> 1f220000-1f220fff : /soc/sata@1a400000
>> 1f227000-1f227fff : /soc/sata@1a400000
>> 1f22a000-1f22a0ff : /soc/phy@1f22a000
>> 1f22d000-1f22dfff : /soc/sata@1a400000
>> 1f22e000-1f22efff : /soc/sata@1a400000
>> 1f230000-1f230fff : /soc/sata@1a800000
>> 1f23a000-1f23a0ff : /soc/phy@1f23a000
>> 1f23d000-1f23dfff : /soc/sata@1a800000
>> 1f23e000-1f23efff : /soc/sata@1a800000
>> 1f2b0000-1f2bffff : csr
>> 79000000-798fffff : /soc/msi@79000000
>> 4100000000-41ffffffff : System RAM
>>   4100080000-41008b58a3 : Kernel code
>>   410093c000-41009e9fff : Kernel data
>> e0d0000000-e0d003ffff : cfg
> 
> Ugh! I though that it is a requirement that every memory/io region user
> must register it using relevant function. It looks that it is not true.
> So, there is only one reliable way to get info about used io/memory regions.
> You must look at DT. However, if driver may agree with a device other
> config and move used io/memory regions to different place without updating
> DT then we are lost.

While the Linux folks are trying to describe all the device in the
Device Tree, it not always the case.

Also, browsing the device tree to find memory range is a pain and quite
fragile. For instance we already do that in the hypervisor to map all
the device to DOM0 (see arch/arm/domain_build.c) but we still do have
bug report of platform not working with this solution.

> 
>> TBH I don't see why you don't hit this issue on x86. Overall some of the
>> drivers can be shared between the 2 architectures.
> 
> Are you able to point out any (x86) driver which does not behave as it should?

Just thinking that on x86 you have the e820 which describe the memory
layout of the platform.

Am I correct to say that every I/O regions are described in the e820 and
therefore registered when Linux is booting?

Regards,

-- 
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel