[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v2] libxl: Introduce a template for devices with a controller



We have several outstanding patch series which add devices that have
two levels: a controller and individual devices attached to that
controller.

In the interest of consistency, this patch introduces a section that
sketches out a template for interfaces for such devices.

Signed-off-by: George Dunlap <george.dunlap@xxxxxxxxxx>
Acked-by: Juergen Gross <jgross@xxxxxxxx>
---
CC: Ian Campbell <ian.campbell@xxxxxxxxxx>
CC: Ian Jackson <ian.jackson@xxxxxxxxxx>
CC: Wei Liu <wei.liu2@xxxxxxxxxx>
CC: Juergen Gross <jgross@xxxxxxxx>
CC: Chun Yan Liu <cyliu@xxxxxxxx>
CC: Olaf Hering <olaf@xxxxxxxxx>

Changes in v2:
- Fixed typos

Changes in v1 (since the RFC):

- Use <class> rather than <type>, and <level> rather than specifying
  controller and device.  The idea being to allow SCSI to use
  terminology more natural to it (i.e., scsihost, scsitarget, scsilun)
  rather than naming things after USB (controller & device).

- Do not require each <level> to have a deviceid, but just a unique
  naming schema.

- Allow multiple levels.

- Include the paragraph about domain configuration lists.
---
 tools/libxl/libxl.h | 65 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index 6b73848..44e2951 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -1396,6 +1396,71 @@ void libxl_vtpminfo_list_free(libxl_vtpminfo *, int 
nr_vtpms);
  *
  *   This function does not interact with the guest and therefore
  *   cannot block on the guest.
+ *
+ * Controllers
+ * -----------
+ *
+ * Most devices are treated individually.  Some classes of device,
+ * however, like USB or SCSI, inherently have the need to have a
+ * hierarchy of different levels, with lower-level devices "attached"
+ * to higher-level ones.  USB for instance has "controllers" at the
+ * top, which have buses, on which are devices, which consist of
+ * multiple interfaces.  SCSI has "hosts" at the top, then buses,
+ * targets, and LUNs.
+ *
+ * In that case, for each <class>, there will be a set of functions
+ * and types for each <level>.  For example, for <class>=usb, there
+ * may be <levels> ctrl (controller) and dev (device), with ctrl being
+ * level 0.
+ *
+ * libxl_device_<class><level0>_<function> will act more or
+ * less like top-level non-bus devices: they will either create or
+ * accept a libxl_devid which will be unique within the
+ * <class><level0> libxl_devid namespace.
+ *
+ * Lower-level devices must have a unique way to be identified.  One
+ * way to do this would be to name it via the name of the next level
+ * up plus an index; for instance, <ctrl devid, port number>.  Another
+ * way would be to have another devid namespace for that level.  This
+ * identifier will be used for queries and removals.
+ *
+ * Lower-level devices will include in their
+ * libxl_device_<class><level> struct a field referring to the unique
+ * index of the level above.  For instance, libxl_device_usbdev might
+ * contain the controller devid.
+ *
+ * In the case where there are multiple different ways to implement a
+ * given device -- for instance, one which is fully PV and one which
+ * uses an emulator -- the controller will contain a field which
+ * specifies what type of implementation is used.  The implementations
+ * of individual devices will be known by the controller to which they
+ * are attached.
+ *
+ * If libxl_device_<class><level>_add receives an empty reference to
+ * the level above, it may return an error.  Or it may (but is not
+ * required to) automatically choose a suitable device in the level
+ * above to which to attach the new device at this level.  It may also
+ * (but is not required to) automatically create a new device at the
+ * level above if no suitable devices exist.  Each class should
+ * document its behavior.
+ *
+ * libxl_device_<class><level>_list will list all devices of <class>
+ * at <level> in the domain.  For example, libxl_device_usbctrl_list
+ * will list all usb controllers; libxl_class_usbdev_list will list
+ * all usb devices across all controllers.
+ *
+ * For each class, the domain config file will contain a single list
+ * for each level.  libxl will first iterate through the list of
+ * top-level devices, then iterate through each level down in turn,
+ * adding devices to devices in the level above.  For instance, there
+ * will be one list for all usb controllers, and one list for all usb
+ * devices.
+ * 
+ * If libxl_device_<class><level>_add automatically creates
+ * higher-level devices as necessary, then it is permissible for the
+ * higher-level lists to be empty and the device list to have devices
+ * with the field containing a reference to the higher level device
+ * uninitialized.
  */
 
 /* Disks */
-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.