[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] EVTCHNOP failure while creating VM



This is the output when I tried to create a vm in a nested xen. I looked up into the source and found error -22 presents invalid arguments. What might be the cause?

(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(XEN) event_channel.c:272:d0 EVTCHNOP failure: domain 1, error -22
(d1) HVM Loader
(d1) Detected Xen v4.4.1
(d1) Xenbus rings @0xfeffc000, event channel 3
(d1) System requested SeaBIOS
(d1) CPU speed is 1600 MHz
(d1) Relocating guest memory for lowmem MMIO space disabled
(XEN) irq.c:270: Dom1 PCI link 0 changed 0 -> 5
(d1) PCI-ISA link 0 routed to IRQ5
(XEN) irq.c:270: Dom1 PCI link 1 changed 0 -> 10
(d1) PCI-ISA link 1 routed to IRQ10
(XEN) irq.c:270: Dom1 PCI link 2 changed 0 -> 11
(d1) PCI-ISA link 2 routed to IRQ11
(XEN) irq.c:270: Dom1 PCI link 3 changed 0 -> 5
(d1) PCI-ISA link 3 routed to IRQ5
(d1) pci dev 01:3 INTA->IRQ10
(d1) pci dev 02:0 INTA->IRQ11
(d1) pci dev 04:0 INTA->IRQ5
(d1) No RAM in high memory; setting high_mem resource base to 100000000
(d1) pci dev 03:0 bar 10 size 002000000: 0f0000008
(d1) pci dev 02:0 bar 14 size 001000000: 0f2000008
(d1) pci dev 04:0 bar 30 size 000040000: 0f3000000
(d1) pci dev 03:0 bar 30 size 000010000: 0f3040000
(d1) pci dev 03:0 bar 14 size 000001000: 0f3050000
(d1) pci dev 02:0 bar 10 size 000000100: 00000c001
(d1) pci dev 04:0 bar 10 size 000000100: 00000c101
(d1) pci dev 04:0 bar 14 size 000000100: 0f3051000
(d1) pci dev 01:1 bar 20 size 000000010: 00000c201
(d1) Multiprocessor initialisation:
(d1)  - CPU0 ... 46-bit phys ... fixed MTRRs ... var MTRRs [2/8] ... done.
(d1) Testing HVM environment:
(d1)  - REP INSB across page boundaries ... passed
(d1)  - GS base MSRs and SWAPGS ... passed
(d1) Passed 2 of 2 tests
(d1) Writing SMBIOS tables ...
(d1) Loading SeaBIOS ...
(d1) Creating MP tables ...
(d1) Loading ACPI ...
(d1) vm86 TSS at fc00a080
(d1) BIOS map:
(d1)  10000-100d3: Scratch space
(d1)  e0000-fffff: Main BIOS
(d1) E820 table:
(d1)  [00]: 00000000:00000000 - 00000000:000a0000: RAM
(d1)  HOLE: 00000000:000a0000 - 00000000:000e0000
(d1)  [01]: 00000000:000e0000 - 00000000:00100000: RESERVED
(d1)  [02]: 00000000:00100000 - 00000000:1f800000: RAM
(d1)  HOLE: 00000000:1f800000 - 00000000:fc000000
(d1)  [03]: 00000000:fc000000 - 00000001:00000000: RESERVED
(d1) Invoking SeaBIOS ...
(d1) SeaBIOS (version rel-1.7.3.1-0-g7d9cbe6-20151216_104417-ubuntu-hvm)
(d1)
(d1) Found Xen hypervisor signature at 40000000
(d1) xen: copy e820...
(d1) Relocating init from 0x000e4161 to 0x1f7e2950 (size 54768)
(d1) CPU Mhz=1600
(d1) Found 7 PCI devices (max PCI bus is 00)
(d1) Allocated Xen hypercall page at 1f7ff000
(d1) Detected Xen v4.4.1
(d1) xen: copy BIOS tables...
(d1) Copying SMBIOS entry point from 0x00010010 to 0x000f1740
(d1) Copying MPTABLE from 0xfc001130/fc001140 to 0x000f1660
(d1) Copying PIR from 0x00010030 to 0x000f15e0
(d1) Copying ACPI RSDP from 0x000100b0 to 0x000f15b0
(d1) Using pmtimer, ioport 0xb008, freq 3579 kHz
(d1) Scan for VGA option rom
(d1) WARNING! Found unaligned PCI rom (vd=1013:00b8)
(d1) Running option rom at c000:0003
(XEN) stdvga.c:147:d1 entering stdvga and caching modes
(d1) Turning on vga text mode console
(d1) SeaBIOS (version rel-1.7.3.1-0-g7d9cbe6-20151216_104417-ubuntu-hvm)
(d1) Machine UUID 71c7de52-a5ed-484b-9ebc-805378916ea9
(d1) Found 0 lpt ports
(d1) Found 0 serial ports
(d1) ATA controller 1 at 1f0/3f4/c200 (irq 14 dev 9)
(d1) ATA controller 2 at 170/374/c208 (irq 15 dev 9)
(d1) ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (5120 MiBytes)
(d1) Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0
(d1) DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
(d1) Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
(d1) PS2 keyboard initialized
(d1) All threads complete.
(d1) Scan for option roms
(d1) Running option rom at c900:0003
(d1) pmm call arg1=1
(d1) pmm call arg1=0
(d1) pmm call arg1=1
(d1) pmm call arg1=0
(d1) Searching bootorder for: /pci@i0cf8/*@4
(d1)
(d1) Press F12 for boot menu.
(d1)
(d1) Searching bootorder for: HALT
(d1) drive 0x000f1560: PCHS=10402/16/63 translation=lba LCHS=652/255/63 s=10485760
(d1) Space available for UMB: ca000-ee800, f0000-f1500
(d1) Returned 61440 bytes of ZoneHigh
(d1) e820 map has 6 items:
(d1)   0: 0000000000000000 - 000000000009fc00 = 1 RAM
(d1)   1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
(d1)   2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
(d1)   3: 0000000000100000 - 000000001f7ff000 = 1 RAM
(d1)   4: 000000001f7ff000 - 000000001f800000 = 2 RESERVED
(d1)   5: 00000000fc000000 - 0000000100000000 = 2 RESERVED
(d1) enter handle_19:
(d1)   NULL
(d1) Booting from Hard Disk...
(d1) Booting from 0000:7c00
(XEN) stdvga.c:151:d1 leaving stdvga
(XEN) irq.c:373: Dom1 callback via changed to Direct Vector 0xf3
(XEN) irq.c:270: Dom1 PCI link 0 changed 5 -> 0
(XEN) irq.c:270: Dom1 PCI link 1 changed 10 -> 0
(XEN) irq.c:270: Dom1 PCI link 2 changed 11 -> 0
(XEN) irq.c:270: Dom1 PCI link 3 changed 5 -> 0
(XEN) grant_table.c:290:d0 Increased maptrack size to 2 frames

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.