[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [BUG] Assertion '(sp == 0) || (peoi[sp-1].vector < vector)' failed at irq.c:1163



Den 18. jan. 2016 11:31, skrev Jan Beulich:
>>>> On 18.01.16 at 00:07, <hakon@xxxxxxxxxxxxxxxxxx> wrote:
>> There we go :-/ . Log attached from boot to assertion-failure with
>> loglvl=all guest_loglvl=all . Some of the log output might be a bit
>> cryptic, they are notes to myself from local boot-scripts, basically
>> firing up my router/name-server/dhcp-server and waiting until services
>> are ready before continuing.
>>
>> ---
>> (XEN) [2016-01-17 22:46:38] **peoi[0] = {107, 0x40, 0}
> According to
>
> (XEN) [2016-01-17 16:50:49] IOAPIC[0]: Set PCI routing entry (1-3 -> 0x40 -> 
> IRQ 3 Mode:0 Active:0)
>
> this might be the serial console, albeit IRQ 107 contradicts this
> afaict. Does this also occur without serial console? Are we
> perhaps wrongly re-using vector 0x40 (and if so might this be
> fixed with -unstable commit fc0c3fa2ad, in turn requiring
> e509b8e09c)?
>
I don't understand all this, but fyi I believe I have two "serial ports"
on the motherboard, one old fashioned serial-port and one created by BMC
for "SOL". They show up in dom0 as ttyS0 and ttyS1. Only ttyS0 is ever
used that I am aware of. I also have one usb-rs232 emulation thingy
which is actually my UPS. All of these are used directly by dom0.


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.