|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v4 17/34] xsplice: Implement support for applying/reverting/replacing patches.
From: Ross Lagerwall <ross.lagerwall@xxxxxxxxxx>
Implement support for the apply, revert and replace actions.
To perform and action on a payload, the hypercall sets up a data
structure to schedule the work. A hook is added in all the
return-to-guest paths to check for work to do and execute it if needed.
In this way, patches can be applied with all CPUs idle and without
stacks. The first CPU to do_xsplice() becomes the master and triggers a
reschedule softirq to trigger all the other CPUs to enter do_xsplice()
with no stack. Once all CPUs have rendezvoused, all CPUs disable IRQs
and NMIs are ignored. The system is then quiscient and the master
performs the action. After this, all CPUs enable IRQs and NMIs are
re-enabled.
Note that it is unsafe to patch do_nmi and the xSplice internal functions.
Patching functions on NMI/MCE path is liable to end in disaster.
The action to perform is one of:
- APPLY: For each function in the module, store the first 5 bytes of the
old function and replace it with a jump to the new function.
- REVERT: Copy the previously stored bytes into the first 5 bytes of the
old function.
- REPLACE: Revert each applied module and then apply the new module.
To prevent a deadlock with any other barrier in the system, the master
will wait for up to 30ms before timing out.
Measurements found that the patch application to take about 100 μs on a
72 CPU system, whether idle or fully loaded.
We also add an BUILD_ON to make sure that the size of the structure
of the payload is not inadvertly changed.
Lastly we unroll the 'vmap_to_page' on x86 as inside the macro there
is a posibility of a NULL pointer. Hence we unroll it with extra
ASSERTS. Note that asserts on non-debug builds are compiled out hence
the extra checks that will just return (and leak memory).
Signed-off-by: Ross Lagerwall <ross.lagerwall@xxxxxxxxxx>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
--
Cc: Stefano Stabellini <stefano.stabellini@xxxxxxxxxx>
Cc: Julien Grall <julien.grall@xxxxxxx>
Cc: Keir Fraser <keir@xxxxxxx>
Cc: Jan Beulich <jbeulich@xxxxxxxx>
Cc: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
Cc: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@xxxxxxx>
Cc: Jun Nakajima <jun.nakajima@xxxxxxxxx>
Cc: Kevin Tian <kevin.tian@xxxxxxxxx>
v2: - Pluck the 'struct xsplice_patch_func' in this patch.
- Modify code per review comments.
- Add more data in the keyboard handler.
- Redo the patching code, split it in functions.
v3: - Add return_ macro for debug builds.
- Move s/payload_list_lock/payload_list/ to earlier patch
- Remove const and use ELF types for xsplice_patch_func
v4: - Add check routine to do simple sanity checks for various
sections.
v5: - s/%p/PRIx64/ as ARM builds complain.
v6: - Move code around. Add more dprintk. Add XSPLICE in front of all
printks/dprintk.
Put the NMIs back if we fail patching.
Add per-cpu to lessen contention for global structure.
Extract from xsplice_do_single patching code into xsplice_do_action
Squash xsplice_do_single and check_for_xsplice_work together to
have all rendezvous in one place.
Made XSPLICE_ACTION_REPLACE work again (wrong list iterator)
s/find_special_sections/prepare_payload/
Use list_del_init and INIT_LIST_HEAD for applied_list
v7: - Add comment, adjust spacing for "Timed out on CPU semaphore"
v8: - Added CR0.WP manipulations when altering the .text of hypervisor.
v9: - Added fix from Andrew for CR0.WP manipulation.
---
---
docs/misc/xsplice.markdown | 3 +-
xen/arch/arm/xsplice.c | 20 ++
xen/arch/x86/domain.c | 4 +
xen/arch/x86/hvm/svm/svm.c | 2 +
xen/arch/x86/hvm/vmx/vmcs.c | 2 +
xen/arch/x86/xsplice.c | 39 ++++
xen/common/xsplice.c | 453 ++++++++++++++++++++++++++++++++++++++++++--
xen/include/asm-arm/nmi.h | 13 ++
xen/include/xen/xsplice.h | 31 ++-
9 files changed, 551 insertions(+), 16 deletions(-)
diff --git a/docs/misc/xsplice.markdown b/docs/misc/xsplice.markdown
index cb3af6e..1940e29 100644
--- a/docs/misc/xsplice.markdown
+++ b/docs/misc/xsplice.markdown
@@ -829,7 +829,8 @@ The implementation must also have a mechanism for:
* Be able to lookup in the Xen hypervisor the symbol names of functions from
the ELF payload.
* Be able to patch .rodata, .bss, and .data sections.
* Further safety checks (blacklist of which functions cannot be patched, check
- the stack, make sure the payload is built with same compiler as hypervisor).
+ the stack, make sure the payload is built with same compiler as hypervisor,
+ and NMI/MCE handlers and do_nmi for right now - until an safe solution is
found).
* NOP out the code sequence if `new_size` is zero.
* Deal with other relocation types: R_X86_64_[8,16,32,32S],
R_X86_64_PC[8,16,64] in payload file.
diff --git a/xen/arch/arm/xsplice.c b/xen/arch/arm/xsplice.c
index b20365c..8f997b0 100644
--- a/xen/arch/arm/xsplice.c
+++ b/xen/arch/arm/xsplice.c
@@ -6,6 +6,26 @@
#include <xen/xsplice_elf.h>
#include <xen/xsplice.h>
+void arch_xsplice_patching_enter(void)
+{
+}
+
+void arch_xsplice_patching_leave(void)
+{
+}
+
+void arch_xsplice_apply_jmp(struct xsplice_patch_func *func)
+{
+}
+
+void arch_xsplice_revert_jmp(struct xsplice_patch_func *func)
+{
+}
+
+void arch_xsplice_post_action(void)
+{
+}
+
int arch_xsplice_verify_elf(const struct xsplice_elf *elf, void *data)
{
return -ENOSYS;
diff --git a/xen/arch/x86/domain.c b/xen/arch/x86/domain.c
index a6d721b..ecea694 100644
--- a/xen/arch/x86/domain.c
+++ b/xen/arch/x86/domain.c
@@ -36,6 +36,7 @@
#include <xen/cpu.h>
#include <xen/wait.h>
#include <xen/guest_access.h>
+#include <xen/xsplice.h>
#include <public/sysctl.h>
#include <public/hvm/hvm_vcpu.h>
#include <asm/regs.h>
@@ -121,6 +122,7 @@ static void idle_loop(void)
(*pm_idle)();
do_tasklet();
do_softirq();
+ check_for_xsplice_work(); /* Must be last. */
}
}
@@ -137,6 +139,7 @@ void startup_cpu_idle_loop(void)
static void noreturn continue_idle_domain(struct vcpu *v)
{
+ check_for_xsplice_work();
reset_stack_and_jump(idle_loop);
}
@@ -144,6 +147,7 @@ static void noreturn continue_nonidle_domain(struct vcpu *v)
{
check_wakeup_from_wait();
mark_regs_dirty(guest_cpu_user_regs());
+ check_for_xsplice_work();
reset_stack_and_jump(ret_from_intr);
}
diff --git a/xen/arch/x86/hvm/svm/svm.c b/xen/arch/x86/hvm/svm/svm.c
index 7634c3f..bbb0a73 100644
--- a/xen/arch/x86/hvm/svm/svm.c
+++ b/xen/arch/x86/hvm/svm/svm.c
@@ -26,6 +26,7 @@
#include <xen/hypercall.h>
#include <xen/domain_page.h>
#include <xen/xenoprof.h>
+#include <xen/xsplice.h>
#include <asm/current.h>
#include <asm/io.h>
#include <asm/paging.h>
@@ -1096,6 +1097,7 @@ static void noreturn svm_do_resume(struct vcpu *v)
hvm_do_resume(v);
+ check_for_xsplice_work();
reset_stack_and_jump(svm_asm_do_resume);
}
diff --git a/xen/arch/x86/hvm/vmx/vmcs.c b/xen/arch/x86/hvm/vmx/vmcs.c
index fd4d876..d31f2a4 100644
--- a/xen/arch/x86/hvm/vmx/vmcs.c
+++ b/xen/arch/x86/hvm/vmx/vmcs.c
@@ -25,6 +25,7 @@
#include <xen/kernel.h>
#include <xen/keyhandler.h>
#include <xen/vm_event.h>
+#include <xen/xsplice.h>
#include <asm/current.h>
#include <asm/cpufeature.h>
#include <asm/processor.h>
@@ -1722,6 +1723,7 @@ void vmx_do_resume(struct vcpu *v)
}
hvm_do_resume(v);
+ check_for_xsplice_work();
reset_stack_and_jump(vmx_asm_do_vmentry);
}
diff --git a/xen/arch/x86/xsplice.c b/xen/arch/x86/xsplice.c
index 48a3645..f4d2610 100644
--- a/xen/arch/x86/xsplice.c
+++ b/xen/arch/x86/xsplice.c
@@ -10,6 +10,45 @@
#include <xen/xsplice_elf.h>
#include <xen/xsplice.h>
+#define PATCH_INSN_SIZE 5
+
+void arch_xsplice_patching_enter(void)
+{
+ /* Disable WP to allow changes to read-only pages. */
+ write_cr0(read_cr0() & ~X86_CR0_WP);
+}
+
+void arch_xsplice_patching_leave(void)
+{
+ /* Reinstate WP. */
+ write_cr0(read_cr0() | X86_CR0_WP);
+}
+
+void arch_xsplice_apply_jmp(struct xsplice_patch_func *func)
+{
+ uint32_t val;
+ uint8_t *old_ptr;
+
+ BUILD_BUG_ON(PATCH_INSN_SIZE < sizeof(*func->undo));
+
+ old_ptr = (uint8_t *)func->old_addr;
+ memcpy(func->undo, old_ptr, PATCH_INSN_SIZE);
+
+ *old_ptr++ = 0xe9; /* Relative jump */
+ val = func->new_addr - func->old_addr - PATCH_INSN_SIZE;
+ memcpy(old_ptr, &val, sizeof val);
+}
+
+void arch_xsplice_revert_jmp(struct xsplice_patch_func *func)
+{
+ memcpy((void *)func->old_addr, func->undo, PATCH_INSN_SIZE);
+}
+
+void arch_xsplice_post_action(void)
+{
+ cpuid_eax(0);
+}
+
int arch_xsplice_verify_elf(const struct xsplice_elf *elf, void *data)
{
diff --git a/xen/common/xsplice.c b/xen/common/xsplice.c
index 5bbb5bb..d456671 100644
--- a/xen/common/xsplice.c
+++ b/xen/common/xsplice.c
@@ -3,6 +3,7 @@
*
*/
+#include <xen/cpu.h>
#include <xen/guest_access.h>
#include <xen/keyhandler.h>
#include <xen/lib.h>
@@ -10,17 +11,29 @@
#include <xen/mm.h>
#include <xen/sched.h>
#include <xen/smp.h>
+#include <xen/softirq.h>
#include <xen/spinlock.h>
#include <xen/vmap.h>
+#include <xen/wait.h>
#include <xen/xsplice_elf.h>
#include <xen/xsplice.h>
#include <asm/event.h>
+#include <asm/nmi.h>
#include <public/sysctl.h>
+/*
+ * Protects against payload_list operations and also allows only one
+ * caller in schedule_work.
+ */
static DEFINE_SPINLOCK(payload_lock);
static LIST_HEAD(payload_list);
+/*
+ * Patches which have been applied.
+ */
+static LIST_HEAD(applied_list);
+
static unsigned int payload_cnt;
static unsigned int payload_version = 1;
@@ -31,9 +44,31 @@ struct payload {
void *payload_address; /* Virtual address mapped. */
size_t payload_pages; /* Nr of the pages. */
mfn_t *mfn; /* Array of MFNs of the pages. */
+ struct list_head applied_list; /* Linked to 'applied_list'. */
+ struct xsplice_patch_func *funcs; /* The array of functions to patch. */
+ unsigned int nfuncs; /* Nr of functions to patch. */
char name[XEN_XSPLICE_NAME_SIZE + 1];/* Name of it. */
};
+/* Defines an outstanding patching action. */
+struct xsplice_work
+{
+ atomic_t semaphore; /* Used for rendezvous. First to grab it will
+ do the patching. */
+ atomic_t irq_semaphore; /* Used to signal all IRQs disabled. */
+ uint32_t timeout; /* Timeout to do the operation. */
+ struct payload *data; /* The payload on which to act. */
+ volatile bool_t do_work; /* Signals work to do. */
+ volatile bool_t ready; /* Signals all CPUs synchronized. */
+ uint32_t cmd; /* Action request: XSPLICE_ACTION_* */
+};
+
+/* There can be only one outstanding patching action. */
+static struct xsplice_work xsplice_work;
+
+/* Indicate whether the CPU needs to consult xsplice_work structure. */
+static DEFINE_PER_CPU(bool_t, work_to_do);
+
static int verify_name(const xen_xsplice_name_t *name)
{
if ( name->size == 0 || name->size > XEN_XSPLICE_NAME_SIZE )
@@ -225,6 +260,72 @@ static int secure_payload(struct payload *payload, struct
xsplice_elf *elf)
return rc;
}
+static int check_special_sections(struct payload *payload,
+ struct xsplice_elf *elf)
+{
+ unsigned int i;
+ static const char *const names[] = { ".xsplice.funcs" };
+
+ for ( i = 0; i < ARRAY_SIZE(names); i++ )
+ {
+ struct xsplice_elf_sec *sec;
+
+ sec = xsplice_elf_sec_by_name(elf, names[i]);
+ if ( !sec )
+ {
+ printk(XENLOG_ERR "%s%s: %s is missing!\n",
+ XSPLICE, elf->name, names[i]);
+ return -EINVAL;
+ }
+ if ( !sec->sec->sh_size )
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int prepare_payload(struct payload *payload,
+ struct xsplice_elf *elf)
+{
+ struct xsplice_elf_sec *sec;
+ unsigned int i;
+ struct xsplice_patch_func *f;
+
+ sec = xsplice_elf_sec_by_name(elf, ".xsplice.funcs");
+ if ( sec )
+ {
+ if ( sec->sec->sh_size % sizeof *payload->funcs )
+ {
+ dprintk(XENLOG_DEBUG, "%s%s: Wrong size of .xsplice.funcs!\n",
+ XSPLICE, elf->name);
+ return -EINVAL;
+ }
+ payload->funcs = (struct xsplice_patch_func *)sec->load_addr;
+ payload->nfuncs = sec->sec->sh_size / (sizeof *payload->funcs);
+ }
+
+ for ( i = 0; i < payload->nfuncs; i++ )
+ {
+ unsigned int j;
+
+ f = &(payload->funcs[i]);
+
+ if ( !f->new_addr || !f->old_addr || !f->old_size || !f->new_size )
+ {
+ dprintk(XENLOG_DEBUG, "%s%s: Address or size fields are zero!\n",
+ XSPLICE, elf->name);
+ return -EINVAL;
+ }
+ for ( j = 0; j < 8; j++ )
+ if ( f->undo[j] )
+ return -EINVAL;
+
+ for ( j = 0; j < 24; j++ )
+ if ( f->pad[j] )
+ return -EINVAL;
+ }
+ return 0;
+}
+
/*
* We MUST be holding the payload_lock spinlock.
*/
@@ -267,8 +368,15 @@ static int load_payload_data(struct payload *payload, void
*raw, ssize_t len)
if ( rc )
goto out;
- rc = secure_payload(payload, &elf);
+ rc = check_special_sections(payload, &elf);
+ if ( rc )
+ goto out;
+ rc = prepare_payload(payload, &elf);
+ if ( rc )
+ goto out;
+
+ rc = secure_payload(payload, &elf);
out:
if ( rc )
free_payload_data(payload);
@@ -320,6 +428,7 @@ static int xsplice_upload(xen_sysctl_xsplice_upload_t
*upload)
data->state = XSPLICE_STATE_CHECKED;
data->rc = 0;
INIT_LIST_HEAD(&data->list);
+ INIT_LIST_HEAD(&data->applied_list);
spin_lock_recursive(&payload_lock);
list_add_tail(&data->list, &payload_list);
@@ -414,6 +523,315 @@ static int xsplice_list(xen_sysctl_xsplice_list_t *list)
return rc ? : idx;
}
+/*
+ * The following functions get the CPUs into an appropriate state and
+ * apply (or revert) each of the payload's functions. This is needed
+ * for XEN_SYSCTL_XSPLICE_ACTION operation (see xsplice_action).
+ */
+
+static int apply_payload(struct payload *data)
+{
+ unsigned int i;
+
+ dprintk(XENLOG_DEBUG, "%s%s: Applying %u functions.\n", XSPLICE,
+ data->name, data->nfuncs);
+
+ arch_xsplice_patching_enter();
+
+ for ( i = 0; i < data->nfuncs; i++ )
+ arch_xsplice_apply_jmp(&data->funcs[i]);
+
+ arch_xsplice_patching_leave();
+
+ list_add_tail(&data->applied_list, &applied_list);
+
+ return 0;
+}
+
+/*
+ * This function is executed having all other CPUs with no stack (we may
+ * have cpu_idle on it) and IRQs disabled.
+ */
+static int revert_payload(struct payload *data)
+{
+ unsigned int i;
+
+ dprintk(XENLOG_DEBUG, "%s%s: Reverting.\n", XSPLICE, data->name);
+
+ arch_xsplice_patching_enter();
+
+ for ( i = 0; i < data->nfuncs; i++ )
+ arch_xsplice_revert_jmp(&data->funcs[i]);
+
+ arch_xsplice_patching_leave();
+
+ list_del_init(&data->applied_list);
+
+ return 0;
+}
+
+/*
+ * This function is executed having all other CPUs with no stack (we may
+ * have cpu_idle on it) and IRQs disabled. We guard against NMI by temporarily
+ * installing our NOP NMI handler.
+ */
+static void xsplice_do_action(void)
+{
+ int rc;
+ struct payload *data, *other, *tmp;
+
+ data = xsplice_work.data;
+ /* Now this function should be the only one on any stack.
+ * No need to lock the payload list or applied list. */
+ switch ( xsplice_work.cmd )
+ {
+ case XSPLICE_ACTION_APPLY:
+ rc = apply_payload(data);
+ if ( rc == 0 )
+ data->state = XSPLICE_STATE_APPLIED;
+ break;
+ case XSPLICE_ACTION_REVERT:
+ rc = revert_payload(data);
+ if ( rc == 0 )
+ data->state = XSPLICE_STATE_CHECKED;
+ break;
+ case XSPLICE_ACTION_REPLACE:
+ rc = 0;
+ /* N.B: Use 'applied_list' member, not 'list'. */
+ list_for_each_entry_safe_reverse ( other, tmp, &applied_list,
applied_list )
+ {
+ other->rc = revert_payload(other);
+ if ( other->rc == 0 )
+ other->state = XSPLICE_STATE_CHECKED;
+ else
+ {
+ rc = -EINVAL;
+ break;
+ }
+ }
+ if ( rc != -EINVAL )
+ {
+ rc = apply_payload(data);
+ if ( rc == 0 )
+ data->state = XSPLICE_STATE_APPLIED;
+ }
+ break;
+ default:
+ rc = -EINVAL;
+ break;
+ }
+
+ data->rc = rc;
+}
+
+/*
+ * MUST be holding the payload_lock.
+ */
+static int schedule_work(struct payload *data, uint32_t cmd, uint32_t timeout)
+{
+ unsigned int cpu;
+
+ ASSERT(spin_is_locked(&payload_lock));
+
+ /* Fail if an operation is already scheduled. */
+ if ( xsplice_work.do_work )
+ return -EBUSY;
+
+ if ( !get_cpu_maps() )
+ {
+ printk(XENLOG_ERR "%s%s: unable to get cpu_maps lock!\n",
+ XSPLICE, data->name);
+ return -EBUSY;
+ }
+
+ xsplice_work.cmd = cmd;
+ xsplice_work.data = data;
+ xsplice_work.timeout = timeout ?: MILLISECS(30);
+
+ dprintk(XENLOG_DEBUG, "%s%s: timeout is %"PRI_stime"ms\n",
+ XSPLICE, data->name, xsplice_work.timeout / MILLISECS(1));
+
+ /*
+ * Once the patching has been completed, the semaphore value will
+ * be num_online_cpus()-1.
+ */
+ atomic_set(&xsplice_work.semaphore, -1);
+ atomic_set(&xsplice_work.irq_semaphore, -1);
+
+ xsplice_work.ready = 0;
+ smp_wmb();
+ xsplice_work.do_work = 1;
+ smp_wmb();
+ /*
+ * Above smp_wmb() gives us an compiler barrier, as we MUST do this
+ * after setting the global structure.
+ */
+ for_each_online_cpu ( cpu )
+ per_cpu(work_to_do, cpu) = 1;
+
+ put_cpu_maps();
+
+ return 0;
+}
+
+/*
+ * Note that because of this NOP code the do_nmi is not safely patchable.
+ * Also if we do receive 'real' NMIs we have lost them. Ditto for MCE.
+ */
+static int mask_nmi_callback(const struct cpu_user_regs *regs, int cpu)
+{
+ /* TODO: Handle missing NMI/MCE.*/
+ return 1;
+}
+
+static void reschedule_fn(void *unused)
+{
+ smp_mb(); /* Synchronize with setting do_work */
+ raise_softirq(SCHEDULE_SOFTIRQ);
+}
+
+static int xsplice_do_wait(atomic_t *counter, s_time_t timeout,
+ unsigned int total_cpus, const char *s)
+{
+ int rc = 0;
+
+ while ( atomic_read(counter) != total_cpus && NOW() < timeout )
+ cpu_relax();
+
+ /* Log & abort. */
+ if ( atomic_read(counter) != total_cpus )
+ {
+ printk(XENLOG_ERR "%s%s: %s %u/%u\n", XSPLICE,
+ xsplice_work.data->name, s, atomic_read(counter), total_cpus);
+ rc = -EBUSY;
+ xsplice_work.data->rc = rc;
+ xsplice_work.do_work = 0;
+ smp_wmb();
+ }
+ return rc;
+}
+
+/*
+ * The main function which manages the work of quiescing the system and
+ * patching code.
+ */
+void check_for_xsplice_work(void)
+{
+ unsigned int cpu = smp_processor_id();
+ nmi_callback_t saved_nmi_callback;
+ s_time_t timeout;
+ unsigned long flags;
+
+ /* Fast path: no work to do. */
+ if ( !per_cpu(work_to_do, cpu ) )
+ return;
+
+ /* In case we aborted, other CPUs can skip right away. */
+ if ( (!xsplice_work.do_work) )
+ {
+ per_cpu(work_to_do, cpu) = 0;
+ return;
+ }
+
+ ASSERT(local_irq_is_enabled());
+
+ /* Set at -1, so will go up to num_online_cpus - 1. */
+ if ( atomic_inc_and_test(&xsplice_work.semaphore) )
+ {
+ struct payload *p;
+ unsigned int total_cpus;
+
+ p = xsplice_work.data;
+ if ( !get_cpu_maps() )
+ {
+ printk(XENLOG_ERR "%s%s: CPU%u - unable to get cpu_maps lock!\n",
+ XSPLICE, p->name, cpu);
+ per_cpu(work_to_do, cpu) = 0;
+ xsplice_work.data->rc = -EBUSY;
+ xsplice_work.do_work = 0;
+ /*
+ * Do NOT decrement semaphore down - as that may cause the other
+ * CPU (which may be at this exact moment checking the ASSERT)
+ * to assume the role of master and then needlessly time out
+ * out (as do_work is zero).
+ */
+ return;
+ }
+
+ barrier(); /* MUST do it after get_cpu_maps. */
+ total_cpus = num_online_cpus() - 1;
+
+ if ( total_cpus )
+ {
+ dprintk(XENLOG_DEBUG, "%s%s: CPU%u - IPIing the %u CPUs\n",
+ XSPLICE, p->name, cpu, total_cpus);
+ smp_call_function(reschedule_fn, NULL, 0);
+ }
+
+ timeout = xsplice_work.timeout + NOW();
+ if ( xsplice_do_wait(&xsplice_work.semaphore, timeout, total_cpus,
+ "Timed out on CPU semaphore") )
+ goto abort;
+
+ /* "Mask" NMIs. */
+ saved_nmi_callback = set_nmi_callback(mask_nmi_callback);
+
+ /* All CPUs are waiting, now signal to disable IRQs. */
+ xsplice_work.ready = 1;
+ smp_wmb();
+
+ atomic_inc(&xsplice_work.irq_semaphore);
+ if ( !xsplice_do_wait(&xsplice_work.irq_semaphore, timeout, total_cpus,
+ "Timed out on IRQ semaphore") )
+ {
+ local_irq_save(flags);
+ /* Do the patching. */
+ xsplice_do_action();
+ /* To flush out pipeline. */
+ arch_xsplice_post_action();
+ local_irq_restore(flags);
+ }
+ set_nmi_callback(saved_nmi_callback);
+
+ abort:
+ per_cpu(work_to_do, cpu) = 0;
+ xsplice_work.do_work = 0;
+
+ smp_wmb(); /* Synchronize with waiting CPUs. */
+ ASSERT(local_irq_is_enabled());
+
+ put_cpu_maps();
+
+ printk(XENLOG_INFO "%s%s finished with rc=%d\n", XSPLICE,
+ p->name, p->rc);
+ }
+ else
+ {
+ /* Wait for all CPUs to rendezvous. */
+ while ( xsplice_work.do_work && !xsplice_work.ready )
+ {
+ cpu_relax();
+ smp_rmb();
+ }
+
+ /* Disable IRQs and signal. */
+ local_irq_save(flags);
+ atomic_inc(&xsplice_work.irq_semaphore);
+
+ /* Wait for patching to complete. */
+ while ( xsplice_work.do_work )
+ {
+ cpu_relax();
+ smp_rmb();
+ }
+ /* To flush out pipeline. */
+ arch_xsplice_post_action();
+ local_irq_restore(flags);
+
+ per_cpu(work_to_do, cpu) = 0;
+ }
+}
+
static int xsplice_action(xen_sysctl_xsplice_action_t *action)
{
struct payload *data;
@@ -452,30 +870,24 @@ static int xsplice_action(xen_sysctl_xsplice_action_t
*action)
case XSPLICE_ACTION_REVERT:
if ( data->state == XSPLICE_STATE_APPLIED )
{
- /* No implementation yet. */
- data->state = XSPLICE_STATE_CHECKED;
- data->rc = 0;
- rc = 0;
+ data->rc = -EAGAIN;
+ rc = schedule_work(data, action->cmd, action->timeout);
}
break;
case XSPLICE_ACTION_APPLY:
if ( (data->state == XSPLICE_STATE_CHECKED) )
{
- /* No implementation yet. */
- data->state = XSPLICE_STATE_APPLIED;
- data->rc = 0;
- rc = 0;
+ data->rc = -EAGAIN;
+ rc = schedule_work(data, action->cmd, action->timeout);
}
break;
case XSPLICE_ACTION_REPLACE:
if ( data->state == XSPLICE_STATE_CHECKED )
{
- /* No implementation yet. */
- data->state = XSPLICE_STATE_CHECKED;
- data->rc = 0;
- rc = 0;
+ data->rc = -EAGAIN;
+ rc = schedule_work(data, action->cmd, action->timeout);
}
break;
@@ -541,19 +953,32 @@ static const char *state2str(uint32_t state)
static void xsplice_printall(unsigned char key)
{
struct payload *data;
+ unsigned int i;
spin_lock_recursive(&payload_lock);
list_for_each_entry ( data, &payload_list, list )
- printk(" name=%s state=%s(%d) %p using %zu pages.\n", data->name,
+ {
+ printk(" name=%s state=%s(%d) %p using %zu pages:\n", data->name,
state2str(data->state), data->state, data->payload_address,
data->payload_pages);
+ for ( i = 0; i < data->nfuncs; i++ )
+ {
+ struct xsplice_patch_func *f = &(data->funcs[i]);
+ printk(" %s patch 0x%"PRIx64"(%u) with 0x%"PRIx64"(%u)\n",
+ f->name, f->old_addr, f->old_size, f->new_addr,
f->new_size);
+ if ( !(i % 100) )
+ process_pending_softirqs();
+ }
+ }
spin_unlock_recursive(&payload_lock);
}
static int __init xsplice_init(void)
{
+ BUILD_BUG_ON( sizeof(struct xsplice_patch_func) != 64 );
+
register_keyhandler('x', xsplice_printall, "print xsplicing info", 1);
arch_xsplice_register_find_space(&find_hole);
return 0;
diff --git a/xen/include/asm-arm/nmi.h b/xen/include/asm-arm/nmi.h
index a60587e..82aff35 100644
--- a/xen/include/asm-arm/nmi.h
+++ b/xen/include/asm-arm/nmi.h
@@ -4,6 +4,19 @@
#define register_guest_nmi_callback(a) (-ENOSYS)
#define unregister_guest_nmi_callback() (-ENOSYS)
+typedef int (*nmi_callback_t)(const struct cpu_user_regs *regs, int cpu);
+
+/**
+ * set_nmi_callback
+ *
+ * Set a handler for an NMI. Only one handler may be
+ * set. Return the old nmi callback handler.
+ */
+static inline nmi_callback_t set_nmi_callback(nmi_callback_t callback)
+{
+ return NULL;
+}
+
#endif /* ASM_NMI_H */
/*
* Local variables:
diff --git a/xen/include/xen/xsplice.h b/xen/include/xen/xsplice.h
index 343e59f..b48a811 100644
--- a/xen/include/xen/xsplice.h
+++ b/xen/include/xen/xsplice.h
@@ -11,12 +11,30 @@ struct xsplice_elf_sec;
struct xsplice_elf_sym;
struct xen_sysctl_xsplice_op;
+#include <xen/elfstructs.h>
+/*
+ * The structure which defines the patching. This is what the hypervisor
+ * expects in the '.xsplice.func' section of the ELF file.
+ *
+ * This MUST be in sync with what the tools generate.
+ */
+struct xsplice_patch_func {
+ const char *name;
+ Elf64_Xword new_addr;
+ Elf64_Xword old_addr;
+ Elf64_Word new_size;
+ Elf64_Word old_size;
+ uint8_t undo[8];
+ uint8_t pad[24];
+};
+
#ifdef CONFIG_XSPLICE
/* Convenience define for printk. */
#define XSPLICE "xsplice: "
int xsplice_op(struct xen_sysctl_xsplice_op *);
+void check_for_xsplice_work(void);
/* Arch hooks. */
int arch_xsplice_verify_elf(const struct xsplice_elf *elf, void *data);
@@ -59,6 +77,17 @@ void arch_xsplice_free_payload(void *va, unsigned int pages,
enum va_type);
*/
typedef int (*find_space_t)(ssize_t, unsigned long *, unsigned long *);
void arch_xsplice_register_find_space(find_space_t cb);
+
+/*
+ * These functions are called around the critical region patching live code,
+ * for an architecture to take make appropratie global state adjustments.
+ */
+void arch_xsplice_patching_enter(void);
+void arch_xsplice_patching_leave(void);
+
+void arch_xsplice_apply_jmp(struct xsplice_patch_func *func);
+void arch_xsplice_revert_jmp(struct xsplice_patch_func *func);
+void arch_xsplice_post_action(void);
#else
#include <xen/errno.h> /* For -ENOSYS */
@@ -66,7 +95,7 @@ static inline int xsplice_op(struct xen_sysctl_xsplice_op *op)
{
return -ENOSYS;
}
-
+static inline void check_for_xsplice_work(void) { };
#endif /* CONFIG_XSPLICE */
#endif /* __XEN_XSPLICE_H__ */
--
2.5.0
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |