[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [Patch V4 0/3] xen, usb: support pvUSB frontend driver



Hi Juergen, All.

I would like to apply PVUSB drivers for using in our platform while PVUSB stuff doesn't reach upstream.

Unfortunately, I couldn't find more recent version of "kernel based" backend driver in mailing list.
I have found it in v0 only.

[Xen-devel] [PATCH 0/4] xen, usb: support pvUSB drivers

Can I use this frontend driver (v4) together with kernel based backend driver (v0)?
Are they fully compatible with each other?

Thank you.

On Mon, Jul 20, 2015 at 8:13 AM, Juergen Gross <jgross@xxxxxxxx> wrote:
Ping?


On 06/23/2015 08:53 AM, Juergen Gross wrote:
This series adds XEN guest pvUSB support. With pvUSB it is possible to
use physical USB devices from a XEN domain.

The support consists of a frontend in form of a virtual hcd driver in
the unprivileged domU passing I/O-requests to the backend in a driver
domain (usually Dom0). The backend is not part of this patch series,
as it will be supported via qemu.

The code is taken (and adapted) from the original pvUSB implementation
done for Linux 2.6 in 2008 by Fujitsu.

Normal operation of USB devices by adding and removing them dynamically
to/from a domain has been tested using various USB devices (USB 1.1,
2.0 and 3.0). The pvUSB backend for these tests was a SUSE SLES Dom0
with a kernel based backend driver.

Changes in V4:
- remove sysfs file from frontend, as it violated the "one value per file"
   rule and didn't serve any real purpose.

Changes in V3:
- move frontend to drivers/usb/host and rename it to xen-hcd.
- changed name prefixes in patch 1 to "xenusb" as requested by Greg
- use __u<n> types rather than uint<n>_t as requested by Greg

Changes in V2:
- removed backend, as it can be implemented in user land
- added some access macros and definitions to the pvUSB interface
   description to make it independant from linux kernel USB internals
- adapted frontend to newer kernel version and use new pvUSB
   interface macros
- set port status in one chunk as suggested by Oliver Neukum


Juergen Gross (3):
   usb: Add Xen pvUSB protocol description
   usb: Introduce Xen pvUSB frontend (xen hcd)
   xen: add Xen pvUSB maintainer

  MAINTAINERS                      |    8 +
  drivers/usb/host/Kconfig         |   11 +
  drivers/usb/host/Makefile        |    1 +
  drivers/usb/host/xen-hcd.c       | 1594 ++++++++++++++++++++++++++++++++++++++
  include/xen/interface/io/usbif.h |  252 ++++++
  5 files changed, 1866 insertions(+)
  create mode 100644 drivers/usb/host/xen-hcd.c
  create mode 100644 include/xen/interface/io/usbif.h



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel



--

Oleksandr Tyshchenko | Embedded Dev
GlobalLogic
www.globallogic.com
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.