Re: [Xen-devel] [PATCH v2 6/6] x86/pat: Document PAT initializations

[Borislav Petkov <bp@xxxxxxx>]

On Wed, Mar 16, 2016 at 06:46:59PM -0600, Toshi Kani wrote:
> Update PAT documentation to describe how PAT is initialized under
> various configurations.
> 
> Signed-off-by: Toshi Kani <toshi.kani@xxxxxxx>
> Cc: Borislav Petkov <bp@xxxxxxx>
> Cc: Luis R. Rodriguez <mcgrof@xxxxxxxx>
> Cc: Juergen Gross <jgross@xxxxxxxx>
> Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> Cc: H. Peter Anvin <hpa@xxxxxxxxx>
> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> ---
>  Documentation/x86/pat.txt |   32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/Documentation/x86/pat.txt b/Documentation/x86/pat.txt
> index 54944c7..f619e1d 100644
> --- a/Documentation/x86/pat.txt
> +++ b/Documentation/x86/pat.txt
> @@ -196,3 +196,35 @@ Another, more verbose way of getting PAT related debug 
> messages is with
>  "debugpat" boot parameter. With this parameter, various debug messages are
>  printed to dmesg log.
>  
> +PAT Initialization
> +------------------
> +
> +The following table describes how PAT is initialized under various
> +configurations. PAT must be set to enable to initialize PAT MSR in order

Err "PAT MSR must be updated by Linux in order to support WC and WT" ... or so?

> +to support WC and WT attributes. Otherwise, PAT keeps PAT MSR value set
> +by BIOS.

"Otherwise, the PAT MSR has the value programmed in it by the firmware."

> Note, Xen enables WC attribute in BIOS setup for guests.
> +
> + MTRR PAT   Call Sequence               PAT State  PAT MSR
> + =========================================================
> + E    E     MTRR -> pat_init()          Enable     OS

s/Enable/Enabled/

MTRR->pat_init() - either use function names for both or do pseudo like
so:

MTRR init -> PAT init

> + E    D     MTRR -> pat_init()          Disable    -

s/Disable/Disabled/. Ditto for the rest.

> + D    E     MTRR -> pat_disable()       Disable    BIOS
> + D    D     MTRR -> pat_disable()       Disable    -
> + -    np/E  nopat() -> pat_disable()    Disable    BIOS
> + -    np/D  nopat() -> pat_disable()    Disable    -
> + E    !P/E  MTRR -> pat_init()          Disable    BIOS
> + D    !P/E  MTRR -> pat_disable()       Disable    BIOS
> + !M   !P/E  MTRR stub -> pat_disable()  Disable    BIOS
> +
> + Legend
> + ------------------------------------------------
> + E        Feature enabled in CPU
> + D     Feature disabled/unsupported in CPU
> + np    "nopat" boot option specified
> + !P    CONFIG_X86_PAT option unset
> + !M    CONFIG_MTRR option unset
> + Enable   PAT state set to enable
> + Disable  PAT state set to disable
> + OS       PAT initializes PAT MSR with OS setup
> + BIOS     PAT keeps PAT MSR with BIOS setup
> +

-- 
Regards/Gruss,
    Boris.

SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284 
(AG Nürnberg)
-- 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel