|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v4 15/26] x86/cpu: Rework Intel masking/faulting setup
This patch is best reviewed as its end result rather than as a diff, as it
rewrites almost all of the setup.
On the BSP, cpuid information is used to evaluate the potential available set
of masking MSRs, and they are unconditionally probed, filling in the
availability information and hardware defaults. A side effect of this is that
probe_intel_cpuid_faulting() can move to being __init.
The command line parameters are then combined with the hardware defaults to
further restrict the Xen default masking level. Each cpu is then context
switched into the default levelling state.
Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
Reviewed-by: Jan Beulich <JBeulich@xxxxxxxx>
---
v2:
* Style fixes.
* Provide extra information if opt_cpu_info.
* Extra comment indicating the expected use of intel_ctxt_switch_levelling().
v3:
* Style fixes.
* Avoid printing the cpumask defaults if faulting is available.
---
xen/arch/x86/cpu/intel.c | 234 ++++++++++++++++++++++++++++++-----------------
1 file changed, 149 insertions(+), 85 deletions(-)
diff --git a/xen/arch/x86/cpu/intel.c b/xen/arch/x86/cpu/intel.c
index ad22375..b2666a8 100644
--- a/xen/arch/x86/cpu/intel.c
+++ b/xen/arch/x86/cpu/intel.c
@@ -18,11 +18,18 @@
#define select_idle_routine(x) ((void)0)
-static unsigned int probe_intel_cpuid_faulting(void)
+static bool_t __init probe_intel_cpuid_faulting(void)
{
uint64_t x;
- return !rdmsr_safe(MSR_INTEL_PLATFORM_INFO, x) &&
- (x & MSR_PLATFORM_INFO_CPUID_FAULTING);
+
+ if (rdmsr_safe(MSR_INTEL_PLATFORM_INFO, x) ||
+ !(x & MSR_PLATFORM_INFO_CPUID_FAULTING))
+ return 0;
+
+ expected_levelling_cap |= LCAP_faulting;
+ levelling_caps |= LCAP_faulting;
+ __set_bit(X86_FEATURE_CPUID_FAULTING, boot_cpu_data.x86_capability);
+ return 1;
}
static DEFINE_PER_CPU(bool_t, cpuid_faulting_enabled);
@@ -44,36 +51,40 @@ void set_cpuid_faulting(bool_t enable)
}
/*
- * opt_cpuid_mask_ecx/edx: cpuid.1[ecx, edx] feature mask.
- * For example, E8400[Intel Core 2 Duo Processor series] ecx = 0x0008E3FD,
- * edx = 0xBFEBFBFF when executing CPUID.EAX = 1 normally. If you want to
- * 'rev down' to E8400, you can set these values in these Xen boot parameters.
+ * Set caps in expected_levelling_cap, probe a specific masking MSR, and set
+ * caps in levelling_caps if it is found, or clobber the MSR index if missing.
+ * If preset, reads the default value into msr_val.
*/
-static void set_cpuidmask(const struct cpuinfo_x86 *c)
+static uint64_t __init _probe_mask_msr(unsigned int *msr, uint64_t caps)
{
- static unsigned int msr_basic, msr_ext, msr_xsave;
- static enum { not_parsed, no_mask, set_mask } status;
- u64 msr_val;
+ uint64_t val = 0;
- if (status == no_mask)
- return;
+ expected_levelling_cap |= caps;
- if (status == set_mask)
- goto setmask;
+ if (rdmsr_safe(*msr, val) || wrmsr_safe(*msr, val))
+ *msr = 0;
+ else
+ levelling_caps |= caps;
- ASSERT((status == not_parsed) && (c == &boot_cpu_data));
- status = no_mask;
+ return val;
+}
- if (!~(opt_cpuid_mask_ecx & opt_cpuid_mask_edx &
- opt_cpuid_mask_ext_ecx & opt_cpuid_mask_ext_edx &
- opt_cpuid_mask_xsave_eax))
- return;
+/* Indices of the masking MSRs, or 0 if unavailable. */
+static unsigned int __read_mostly msr_basic, __read_mostly msr_ext,
+ __read_mostly msr_xsave;
+
+/*
+ * Probe for the existance of the expected masking MSRs. They might easily
+ * not be available if Xen is running virtualised.
+ */
+static void __init probe_masking_msrs(void)
+{
+ const struct cpuinfo_x86 *c = &boot_cpu_data;
+ unsigned int exp_msr_basic, exp_msr_ext, exp_msr_xsave;
/* Only family 6 supports this feature. */
- if (c->x86 != 6) {
- printk("No CPUID feature masking support available\n");
+ if (c->x86 != 6)
return;
- }
switch (c->x86_model) {
case 0x17: /* Yorkfield, Wolfdale, Penryn, Harpertown(DP) */
@@ -100,59 +111,121 @@ static void set_cpuidmask(const struct cpuinfo_x86 *c)
break;
}
- status = set_mask;
+ exp_msr_basic = msr_basic;
+ exp_msr_ext = msr_ext;
+ exp_msr_xsave = msr_xsave;
- if (~(opt_cpuid_mask_ecx & opt_cpuid_mask_edx)) {
- if (msr_basic)
- printk("Writing CPUID feature mask ecx:edx ->
%08x:%08x\n",
- opt_cpuid_mask_ecx, opt_cpuid_mask_edx);
- else
- printk("No CPUID feature mask available\n");
- }
- else
- msr_basic = 0;
-
- if (~(opt_cpuid_mask_ext_ecx & opt_cpuid_mask_ext_edx)) {
- if (msr_ext)
- printk("Writing CPUID extended feature mask ecx:edx ->
%08x:%08x\n",
- opt_cpuid_mask_ext_ecx, opt_cpuid_mask_ext_edx);
- else
- printk("No CPUID extended feature mask available\n");
- }
- else
- msr_ext = 0;
-
- if (~opt_cpuid_mask_xsave_eax) {
- if (msr_xsave)
- printk("Writing CPUID xsave feature mask eax -> %08x\n",
- opt_cpuid_mask_xsave_eax);
- else
- printk("No CPUID xsave feature mask available\n");
+ if (msr_basic)
+ cpuidmask_defaults._1cd = _probe_mask_msr(&msr_basic, LCAP_1cd);
+
+ if (msr_ext)
+ cpuidmask_defaults.e1cd = _probe_mask_msr(&msr_ext, LCAP_e1cd);
+
+ if (msr_xsave)
+ cpuidmask_defaults.Da1 = _probe_mask_msr(&msr_xsave, LCAP_Da1);
+
+ /*
+ * Don't bother warning about a mismatch if virtualised. These MSRs
+ * are not architectural and almost never virtualised.
+ */
+ if ((expected_levelling_cap == levelling_caps) ||
+ cpu_has_hypervisor)
+ return;
+
+ printk(XENLOG_WARNING "Mismatch between expected (%#x) "
+ "and real (%#x) levelling caps: missing %#x\n",
+ expected_levelling_cap, levelling_caps,
+ (expected_levelling_cap ^ levelling_caps) & levelling_caps);
+ printk(XENLOG_WARNING "Fam %#x, model %#x expected (%#x/%#x/%#x), "
+ "got (%#x/%#x/%#x)\n", c->x86, c->x86_model,
+ exp_msr_basic, exp_msr_ext, exp_msr_xsave,
+ msr_basic, msr_ext, msr_xsave);
+ printk(XENLOG_WARNING
+ "If not running virtualised, please report a bug\n");
+}
+
+/*
+ * Context switch levelling state to the next domain. A parameter of NULL is
+ * used to context switch to the default host state, and is used by the BSP/AP
+ * startup code.
+ */
+static void intel_ctxt_switch_levelling(const struct domain *nextd)
+{
+ struct cpuidmasks *these_masks = &this_cpu(cpuidmasks);
+ const struct cpuidmasks *masks = &cpuidmask_defaults;
+
+#define LAZY(msr, field) \
+ ({ \
+ if (unlikely(these_masks->field != masks->field) && \
+ (msr)) \
+ { \
+ wrmsrl((msr), masks->field); \
+ these_masks->field = masks->field; \
+ } \
+ })
+
+ LAZY(msr_basic, _1cd);
+ LAZY(msr_ext, e1cd);
+ LAZY(msr_xsave, Da1);
+
+#undef LAZY
+}
+
+/*
+ * opt_cpuid_mask_ecx/edx: cpuid.1[ecx, edx] feature mask.
+ * For example, E8400[Intel Core 2 Duo Processor series] ecx = 0x0008E3FD,
+ * edx = 0xBFEBFBFF when executing CPUID.EAX = 1 normally. If you want to
+ * 'rev down' to E8400, you can set these values in these Xen boot parameters.
+ */
+static void __init noinline intel_init_levelling(void)
+{
+ if (!probe_intel_cpuid_faulting())
+ probe_masking_msrs();
+
+ if (msr_basic) {
+ uint32_t ecx, edx, tmp;
+
+ cpuid(0x00000001, &tmp, &tmp, &ecx, &edx);
+
+ ecx &= opt_cpuid_mask_ecx;
+ edx &= opt_cpuid_mask_edx;
+
+ cpuidmask_defaults._1cd &= ((u64)edx << 32) | ecx;
}
- else
- msr_xsave = 0;
-
- setmask:
- if (msr_basic &&
- wrmsr_safe(msr_basic,
- ((u64)opt_cpuid_mask_edx << 32) | opt_cpuid_mask_ecx)){
- msr_basic = 0;
- printk("Failed to set CPUID feature mask\n");
+
+ if (msr_ext) {
+ uint32_t ecx, edx, tmp;
+
+ cpuid(0x80000001, &tmp, &tmp, &ecx, &edx);
+
+ ecx &= opt_cpuid_mask_ext_ecx;
+ edx &= opt_cpuid_mask_ext_edx;
+
+ cpuidmask_defaults.e1cd &= ((u64)edx << 32) | ecx;
}
- if (msr_ext &&
- wrmsr_safe(msr_ext,
- ((u64)opt_cpuid_mask_ext_edx << 32) |
opt_cpuid_mask_ext_ecx)){
- msr_ext = 0;
- printk("Failed to set CPUID extended feature mask\n");
+ if (msr_xsave) {
+ uint32_t eax, tmp;
+
+ cpuid_count(0x0000000d, 1, &eax, &tmp, &tmp, &tmp);
+
+ eax &= opt_cpuid_mask_xsave_eax;
+
+ cpuidmask_defaults.Da1 &= (~0ULL << 32) | eax;
}
- if (msr_xsave &&
- (rdmsr_safe(msr_xsave, msr_val) ||
- wrmsr_safe(msr_xsave,
- (msr_val & (~0ULL << 32)) | opt_cpuid_mask_xsave_eax))){
- msr_xsave = 0;
- printk("Failed to set CPUID xsave feature mask\n");
+ if (opt_cpu_info) {
+ printk(XENLOG_INFO "Levelling caps: %#x\n", levelling_caps);
+
+ if (!cpu_has_cpuid_faulting)
+ printk(XENLOG_INFO
+ "MSR defaults: 1d 0x%08x, 1c 0x%08x, e1d 0x%08x,
"
+ "e1c 0x%08x, Da1 0x%08x\n",
+ (uint32_t)(cpuidmask_defaults._1cd >> 32),
+ (uint32_t)cpuidmask_defaults._1cd,
+ (uint32_t)(cpuidmask_defaults.e1cd >> 32),
+ (uint32_t)cpuidmask_defaults.e1cd,
+ (uint32_t)cpuidmask_defaults.Da1);
}
}
@@ -190,22 +263,13 @@ static void early_init_intel(struct cpuinfo_x86 *c)
(boot_cpu_data.x86_mask == 3 || boot_cpu_data.x86_mask == 4))
paddr_bits = 36;
- if (c == &boot_cpu_data && c->x86 == 6) {
- if (probe_intel_cpuid_faulting())
- __set_bit(X86_FEATURE_CPUID_FAULTING,
- c->x86_capability);
- } else if (boot_cpu_has(X86_FEATURE_CPUID_FAULTING)) {
- BUG_ON(!probe_intel_cpuid_faulting());
+ if (c == &boot_cpu_data)
+ intel_init_levelling();
+
+ if (test_bit(X86_FEATURE_CPUID_FAULTING, boot_cpu_data.x86_capability))
__set_bit(X86_FEATURE_CPUID_FAULTING, c->x86_capability);
- }
- if (!cpu_has_cpuid_faulting)
- set_cpuidmask(c);
- else if ((c == &boot_cpu_data) &&
- (~(opt_cpuid_mask_ecx & opt_cpuid_mask_edx &
- opt_cpuid_mask_ext_ecx & opt_cpuid_mask_ext_edx &
- opt_cpuid_mask_xsave_eax)))
- printk("No CPUID feature masking support available\n");
+ intel_ctxt_switch_levelling(NULL);
}
/*
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |