[Xen-devel] Building tools for ARM (WAS Re: help)

[Julien Grall <julien.grall@xxxxxxx>]

(CC xen-user, BCC xen-devel)

On 23/03/16 10:23, Marwa Hamza wrote:
> ello
Hello,

Please have a more meaningful subject. Also the question is not related 
to development so the thread is moved to xen-users.
> i'm trying to learn more about xen hypervisor .. i install xen in my
> host with alpine as domu
> and now i'm trying to build xen from source with linux dom0 for an arm
> board .. i have a little bit confusion about building xen from the source
> here's what i did
> i build xen from the source
> git clone git://xenbits.xen.org/xen.git <http://xenbits.xen.org/xen.git>
>
> make dist-xen XEN_TARGET_ARCH=arm32 CROSS_COMPILE=arm-linux-gnueabihf-
> CONFIG_EARLY_PRINTK=omap5432
>
> then i download the linux kernel from
> git clone
> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> <http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git>
>
> i configured and compiled successfully
>
> i have in my sd card the u-boot.img and MLO and zimage xenuimage and the
> file system ubuntu .. it worked fine after some problems .. now i'm
> trynig to install linux as domu ..
>
> when i wrote xl list ..the output is no command found ... it looks like
> i need to install xen but i don't know how .. i'm really confused .
> where should i install it and how
> does any body can help me
You will need to compile and install the tools on the board (see [1]).

Regards,

[1] http://wiki.xenproject.org/wiki/Compiling_Xen_From_Source

--
Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel