|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v6 06/21] xen/x86: Improvements to in-hypervisor cpuid sanity checks
Currently, {pv,hvm}_cpuid() has a large quantity of essentially-static logic
for modifying the features visible to a guest. A lot of this can be subsumed
by {pv,hvm}_featuremask, which identify the features available on this
hardware which could be given to a PV or HVM guest.
This is a step in the direction of full per-domain cpuid policies, but lots
more development is needed for that. As a result, the static checks are
simplified, but the dynamic checks need to remain for now.
As a side effect, some of the logic for special features can be improved.
OSXSAVE and OSPKE will be automatically cleared because of being absent in the
featuremask. This allows the fast-forward logic to be more simple.
In addition, there are some corrections to the existing logic:
* Hiding PSE36 out of PAE mode is architecturally wrong. It turns out that
it was a bugfix for running HyperV under Xen, which wanted to see PSE36
even after choosing to use PAE paging. PSE36 is not supported by shadow
paging, so is hidden from non-HAP guests, but is still visible for HAP
guests. It is also leaked into non-HAP guests when the guest is already
running in PAE mode.
* Changing the visibility of RDTSCP based on host TSC stability or virtual
TSC mode is bogus, so dropped.
* When emulating Intel to a guest, the common features in e1d should be
cleared.
* The APIC bit in e1d (on non-Intel) is also a fast-forward from the
APIC_BASE MSR.
* A guest with XSAVES and no xcr0|xss features should see
XSTATE_AREA_MIN_SIZE in %ebx (bug in c/s 9d313bde "x86/xsaves: ebx may
return wrong value using CPUID eax=0xd,ecx =1").
As a small improvement, use compiler-visible &'s and |'s, rather than
{clear,set}_bit().
Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
Reviewed-by: Jan Beulich <JBeulich@xxxxxxxx>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
---
v2:
* Reinstate some of the dynamic checks for now. Future development work will
instate a complete per-domain policy.
* Fix OSXSAVE handling for PV guests.
v3:
* Better handling of the cross-vendor case.
* Improvements to the handling of special features.
* Correct PSE36 to being a HAP-only feature.
* Yet more OSXSAVE fixes for PV guests.
v4:
* Leak PSE36 into shadow guests to fix buggy versions of Hyper-V.
* Leak MTRR into the hardware domain to fix Xenolinux dom0.
* Change cross-vendor 1D disabling logic.
* Avoid reading arch.pv_vcpu for PVH guests.
v5:
* Clarify the commit message regarding PSE36.
* Drop redundant is_pv_domain().
* Fix deep-C and P states with modern Linux PVOps on faulting-capable hardware.
v6:
* Another bugfix for CPUID.0xd[1].ebx
---
xen/arch/x86/hvm/hvm.c | 128 +++++++++++++-------
xen/arch/x86/traps.c | 254 +++++++++++++++++++++++++++------------
xen/include/asm-x86/cpufeature.h | 2 +
3 files changed, 265 insertions(+), 119 deletions(-)
diff --git a/xen/arch/x86/hvm/hvm.c b/xen/arch/x86/hvm/hvm.c
index 8313cf9..f24126d 100644
--- a/xen/arch/x86/hvm/hvm.c
+++ b/xen/arch/x86/hvm/hvm.c
@@ -72,6 +72,7 @@
#include <public/memory.h>
#include <public/vm_event.h>
#include <public/arch-x86/cpuid.h>
+#include <asm/cpuid.h>
bool_t __read_mostly hvm_enabled;
@@ -3358,62 +3359,71 @@ void hvm_cpuid(unsigned int input, unsigned int *eax,
unsigned int *ebx,
/* Fix up VLAPIC details. */
*ebx &= 0x00FFFFFFu;
*ebx |= (v->vcpu_id * 2) << 24;
+
+ *ecx &= hvm_featureset[FEATURESET_1c];
+ *edx &= hvm_featureset[FEATURESET_1d];
+
+ /* APIC exposed to guests, but Fast-forward MSR_APIC_BASE.EN back in.
*/
if ( vlapic_hw_disabled(vcpu_vlapic(v)) )
- __clear_bit(X86_FEATURE_APIC & 31, edx);
+ *edx &= ~cpufeat_bit(X86_FEATURE_APIC);
- /* Fix up OSXSAVE. */
- if ( *ecx & cpufeat_mask(X86_FEATURE_XSAVE) &&
- (v->arch.hvm_vcpu.guest_cr[4] & X86_CR4_OSXSAVE) )
+ /* OSXSAVE cleared by hvm_featureset. Fast-forward CR4 back in. */
+ if ( v->arch.hvm_vcpu.guest_cr[4] & X86_CR4_OSXSAVE )
*ecx |= cpufeat_mask(X86_FEATURE_OSXSAVE);
- else
- *ecx &= ~cpufeat_mask(X86_FEATURE_OSXSAVE);
- /* Don't expose PCID to non-hap hvm. */
+ /* Don't expose HAP-only features to non-hap guests. */
if ( !hap_enabled(d) )
+ {
*ecx &= ~cpufeat_mask(X86_FEATURE_PCID);
- /* Only provide PSE36 when guest runs in 32bit PAE or in long mode */
- if ( !(hvm_pae_enabled(v) || hvm_long_mode_enabled(v)) )
- *edx &= ~cpufeat_mask(X86_FEATURE_PSE36);
+ /*
+ * PSE36 is not supported in shadow mode. This bit should be
+ * unilaterally cleared.
+ *
+ * However, an unspecified version of Hyper-V from 2011 refuses
+ * to start as the "cpu does not provide required hw features" if
+ * it can't see PSE36.
+ *
+ * As a workaround, leak the toolstack-provided PSE36 value into a
+ * shadow guest if the guest is already using PAE paging (and
+ * won't care about reverting back to PSE paging). Otherwise,
+ * knoble it, so a 32bit guest doesn't get the impression that it
+ * could try to use PSE36 paging.
+ */
+ if ( !(hvm_pae_enabled(v) || hvm_long_mode_enabled(v)) )
+ *edx &= ~cpufeat_mask(X86_FEATURE_PSE36);
+ }
break;
+
case 0x7:
if ( count == 0 )
{
- if ( !cpu_has_smep )
- *ebx &= ~cpufeat_mask(X86_FEATURE_SMEP);
-
- if ( !cpu_has_smap )
- *ebx &= ~cpufeat_mask(X86_FEATURE_SMAP);
+ /* Fold host's FDP_EXCP_ONLY and NO_FPU_SEL into guest's view. */
+ *ebx &= (hvm_featureset[FEATURESET_7b0] &
+ ~special_features[FEATURESET_7b0]);
+ *ebx |= (host_featureset[FEATURESET_7b0] &
+ special_features[FEATURESET_7b0]);
- /* Don't expose MPX to hvm when VMX support is not available. */
- if ( !(vmx_vmexit_control & VM_EXIT_CLEAR_BNDCFGS) ||
- !(vmx_vmentry_control & VM_ENTRY_LOAD_BNDCFGS) )
- *ebx &= ~cpufeat_mask(X86_FEATURE_MPX);
+ *ecx &= hvm_featureset[FEATURESET_7c0];
+ /* Don't expose HAP-only features to non-hap guests. */
if ( !hap_enabled(d) )
{
- /* Don't expose INVPCID to non-hap hvm. */
*ebx &= ~cpufeat_mask(X86_FEATURE_INVPCID);
- /* X86_FEATURE_PKU is not yet implemented for shadow paging.
*/
*ecx &= ~cpufeat_mask(X86_FEATURE_PKU);
}
- if ( (*ecx & cpufeat_mask(X86_FEATURE_PKU)) &&
- (v->arch.hvm_vcpu.guest_cr[4] & X86_CR4_PKE) )
+ /* OSPKE cleared by hvm_featureset. Fast-forward CR4 back in. */
+ if ( v->arch.hvm_vcpu.guest_cr[4] & X86_CR4_PKE )
*ecx |= cpufeat_mask(X86_FEATURE_OSPKE);
- else
- *ecx &= ~cpufeat_mask(X86_FEATURE_OSPKE);
-
- /* Don't expose PCOMMIT to hvm when VMX support is not available.
*/
- if ( !cpu_has_vmx_pcommit )
- *ebx &= ~cpufeat_mask(X86_FEATURE_PCOMMIT);
}
-
break;
+
case 0xb:
/* Fix the x2APIC identifier. */
*edx = v->vcpu_id * 2;
break;
+
case 0xd:
/* EBX value of main leaf 0 depends on enabled xsave features */
if ( count == 0 && v->arch.xcr0 )
@@ -3430,11 +3440,15 @@ void hvm_cpuid(unsigned int input, unsigned int *eax,
unsigned int *ebx,
*ebx = _eax + _ebx;
}
}
+
if ( count == 1 )
{
- uint64_t xfeatures = v->arch.xcr0 | v->arch.hvm_vcpu.msr_xss;
- if ( cpu_has_xsaves && cpu_has_vmx_xsaves && xfeatures )
+ *eax &= hvm_featureset[FEATURESET_Da1];
+
+ if ( *eax & cpufeat_mask(X86_FEATURE_XSAVES) )
{
+ uint64_t xfeatures = v->arch.xcr0 | v->arch.hvm_vcpu.msr_xss;
+
*ebx = XSTATE_AREA_MIN_SIZE;
if ( xfeatures & ~XSTATE_FP_SSE )
for ( sub_leaf = 2; sub_leaf < 63; sub_leaf++ )
@@ -3451,20 +3465,42 @@ void hvm_cpuid(unsigned int input, unsigned int *eax,
unsigned int *ebx,
break;
case 0x80000001:
- /* We expose RDTSCP feature to guest only when
- tsc_mode == TSC_MODE_DEFAULT and host_tsc_is_safe() returns 1 */
- if ( d->arch.tsc_mode != TSC_MODE_DEFAULT ||
- !host_tsc_is_safe() )
- *edx &= ~cpufeat_mask(X86_FEATURE_RDTSCP);
- /* Hide 1GB-superpage feature if we can't emulate it. */
- if (!hvm_pse1gb_supported(d))
+ *ecx &= hvm_featureset[FEATURESET_e1c];
+ *edx &= hvm_featureset[FEATURESET_e1d];
+
+ /* If not emulating AMD, clear the duplicated features in e1d. */
+ if ( d->arch.x86_vendor != X86_VENDOR_AMD )
+ *edx &= ~CPUID_COMMON_1D_FEATURES;
+ /* fast-forward MSR_APIC_BASE.EN if it hasn't already been clobbered.
*/
+ else if ( vlapic_hw_disabled(vcpu_vlapic(v)) )
+ *edx &= ~cpufeat_bit(X86_FEATURE_APIC);
+
+ /* Don't expose HAP-only features to non-hap guests. */
+ if ( !hap_enabled(d) )
+ {
*edx &= ~cpufeat_mask(X86_FEATURE_PAGE1GB);
- /* Only provide PSE36 when guest runs in 32bit PAE or in long mode */
- if ( !(hvm_pae_enabled(v) || hvm_long_mode_enabled(v)) )
- *edx &= ~cpufeat_mask(X86_FEATURE_PSE36);
- /* Hide data breakpoint extensions if the hardware has no support. */
- if ( !boot_cpu_has(X86_FEATURE_DBEXT) )
- *ecx &= ~cpufeat_mask(X86_FEATURE_DBEXT);
+
+ /*
+ * PSE36 is not supported in shadow mode. This bit should be
+ * unilaterally cleared.
+ *
+ * However, an unspecified version of Hyper-V from 2011 refuses
+ * to start as the "cpu does not provide required hw features" if
+ * it can't see PSE36.
+ *
+ * As a workaround, leak the toolstack-provided PSE36 value into a
+ * shadow guest if the guest is already using PAE paging (and
+ * won't care about reverting back to PSE paging). Otherwise,
+ * knoble it, so a 32bit guest doesn't get the impression that it
+ * could try to use PSE36 paging.
+ */
+ if ( !(hvm_pae_enabled(v) || hvm_long_mode_enabled(v)) )
+ *edx &= ~cpufeat_mask(X86_FEATURE_PSE36);
+ }
+ break;
+
+ case 0x80000007:
+ *edx &= hvm_featureset[FEATURESET_e7d];
break;
case 0x80000008:
@@ -3482,6 +3518,8 @@ void hvm_cpuid(unsigned int input, unsigned int *eax,
unsigned int *ebx,
hvm_cpuid(0x80000001, NULL, NULL, NULL, &_edx);
*eax = (*eax & ~0xffff00) | (_edx & cpufeat_mask(X86_FEATURE_LM)
? 0x3000 : 0x2000);
+
+ *ebx &= hvm_featureset[FEATURESET_e8b];
break;
}
}
diff --git a/xen/arch/x86/traps.c b/xen/arch/x86/traps.c
index 8125c53..69dc93b 100644
--- a/xen/arch/x86/traps.c
+++ b/xen/arch/x86/traps.c
@@ -73,6 +73,7 @@
#include <asm/hpet.h>
#include <asm/vpmu.h>
#include <public/arch-x86/cpuid.h>
+#include <asm/cpuid.h>
#include <xsm/xsm.h>
/*
@@ -923,69 +924,162 @@ void pv_cpuid(struct cpu_user_regs *regs)
else
cpuid_count(leaf, subleaf, &a, &b, &c, &d);
- if ( (leaf & 0x7fffffff) == 0x00000001 )
- {
- /* Modify Feature Information. */
- if ( !cpu_has_apic )
- __clear_bit(X86_FEATURE_APIC, &d);
-
- if ( !is_pvh_domain(currd) )
- {
- __clear_bit(X86_FEATURE_PSE, &d);
- __clear_bit(X86_FEATURE_PGE, &d);
- __clear_bit(X86_FEATURE_PSE36, &d);
- __clear_bit(X86_FEATURE_VME, &d);
- }
- }
-
switch ( leaf )
{
case 0x00000001:
- /* Modify Feature Information. */
- if ( !cpu_has_sep )
- __clear_bit(X86_FEATURE_SEP, &d);
- __clear_bit(X86_FEATURE_DS, &d);
- __clear_bit(X86_FEATURE_TM1, &d);
- __clear_bit(X86_FEATURE_PBE, &d);
- if ( is_pvh_domain(currd) )
- __clear_bit(X86_FEATURE_MTRR, &d);
-
- __clear_bit(X86_FEATURE_DTES64 % 32, &c);
- __clear_bit(X86_FEATURE_MONITOR % 32, &c);
- __clear_bit(X86_FEATURE_DSCPL % 32, &c);
- __clear_bit(X86_FEATURE_VMX % 32, &c);
- __clear_bit(X86_FEATURE_SMX % 32, &c);
- __clear_bit(X86_FEATURE_TM2 % 32, &c);
+ c &= pv_featureset[FEATURESET_1c];
+ d &= pv_featureset[FEATURESET_1d];
+
if ( is_pv_32bit_domain(currd) )
- __clear_bit(X86_FEATURE_CX16 % 32, &c);
- __clear_bit(X86_FEATURE_XTPR % 32, &c);
- __clear_bit(X86_FEATURE_PDCM % 32, &c);
- __clear_bit(X86_FEATURE_PCID % 32, &c);
- __clear_bit(X86_FEATURE_DCA % 32, &c);
- if ( !cpu_has_xsave )
+ c &= ~cpufeat_mask(X86_FEATURE_CX16);
+
+ if ( !is_pvh_domain(currd) )
{
- __clear_bit(X86_FEATURE_XSAVE % 32, &c);
- __clear_bit(X86_FEATURE_AVX % 32, &c);
+ /*
+ * Delete the PVH condition when HVMLite formally replaces PVH,
+ * and HVM guests no longer enter a PV codepath.
+ */
+
+ /*
+ * !!! OSXSAVE handling for PV guests is non-architectural !!!
+ *
+ * Architecturally, the correct code here is simply:
+ *
+ * if ( curr->arch.pv_vcpu.ctrlreg[4] & X86_CR4_OSXSAVE )
+ * c |= cpufeat_mask(X86_FEATURE_OSXSAVE);
+ *
+ * However because of bugs in Xen (before c/s bd19080b, Nov 2010,
+ * the XSAVE cpuid flag leaked into guests despite the feature not
+ * being available for use), buggy workarounds where introduced to
+ * Linux (c/s 947ccf9c, also Nov 2010) which relied on the fact
+ * that Xen also incorrectly leaked OSXSAVE into the guest.
+ *
+ * Furthermore, providing architectural OSXSAVE behaviour to a
+ * many Linux PV guests triggered a further kernel bug when the
+ * fpu code observes that XSAVEOPT is available, assumes that
+ * xsave state had been set up for the task, and follows a wild
+ * pointer.
+ *
+ * Older Linux PVOPS kernels however do require architectural
+ * behaviour. They observe Xen's leaked OSXSAVE and assume they
+ * can already use XSETBV, dying with a #UD because the shadowed
+ * CR4.OSXSAVE is clear. This behaviour has been adjusted in all
+ * observed cases via stable backports of the above changeset.
+ *
+ * Therefore, the leaking of Xen's OSXSAVE setting has become a
+ * defacto part of the PV ABI and can't reasonably be corrected.
+ *
+ * The following situations and logic now applies:
+ *
+ * - Hardware without CPUID faulting support and native CPUID:
+ * There is nothing Xen can do here. The hosts XSAVE flag will
+ * leak through and Xen's OSXSAVE choice will leak through.
+ *
+ * In the case that the guest kernel has not set up OSXSAVE,
only
+ * SSE will be set in xcr0, and guest userspace can't do too
much
+ * damage itself.
+ *
+ * - Enlightened CPUID or CPUID faulting available:
+ * Xen can fully control what is seen here. Guest kernels need
+ * to see the leaked OSXSAVE, but guest userspace is given
+ * architectural behaviour, to reflect the guest kernels
+ * intentions.
+ */
+ /* OSXSAVE cleared by pv_featureset. Fast-forward CR4 back in. */
+ if ( (guest_kernel_mode(curr, regs) &&
+ (read_cr4() & X86_CR4_OSXSAVE)) ||
+ (curr->arch.pv_vcpu.ctrlreg[4] & X86_CR4_OSXSAVE) )
+ c |= cpufeat_mask(X86_FEATURE_OSXSAVE);
+
+ /*
+ * At the time of writing, a PV domain is the only viable option
+ * for Dom0. Several interactions between dom0 and Xen for real
+ * hardware setup have unfortunately been implemented based on
+ * state which incorrectly leaked into dom0.
+ *
+ * These leaks are retained for backwards compatibility, but
+ * restricted to the hardware domains kernel only.
+ */
+ if ( is_hardware_domain(currd) && guest_kernel_mode(curr, regs) )
+ {
+ /*
+ * MTRR used to unconditionally leak into PV guests. They
+ * cannot MTRR infrastructure at all, and shouldn't be able to
+ * see the feature.
+ *
+ * Modern PVOPS Linux self-clobbers the MTRR feature, to avoid
+ * trying to use the associated MSRs. Xenolinux-based PV
dom0's
+ * however use the MTRR feature as an indication of the
presence
+ * of the XENPF_{add,del,read}_memtype hypercalls.
+ */
+ if ( cpu_has_mtrr )
+ d |= cpufeat_mask(X86_FEATURE_MTRR);
+
+ /*
+ * MONITOR never leaked into PV guests, as PV guests cannot
+ * use the MONITOR/MWAIT instructions. As such, they require
+ * the feature to not being present in emulated CPUID.
+ *
+ * Modern PVOPS Linux try to be cunning and use native CPUID
+ * to see if the hardware actually supports MONITOR, and by
+ * extension, deep C states.
+ *
+ * If the feature is seen, deep-C state information is
+ * obtained from the DSDT and handed back to Xen via the
+ * XENPF_set_processor_pminfo hypercall.
+ *
+ * This mechanism is incompatible with an HVM-based hardware
+ * domain, and also with CPUID Faulting.
+ *
+ * Luckily, Xen can be just as 'cunning', and distinguish an
+ * emulated CPUID from a faulted CPUID by whether a #UD or #GP
+ * fault is currently being serviced. Yuck...
+ */
+ if ( cpu_has_monitor && regs->entry_vector == TRAP_gp_fault )
+ c |= cpufeat_mask(X86_FEATURE_MONITOR);
+
+ /*
+ * While MONITOR never leaked into PV guests, EIST always used
+ * to.
+ *
+ * Modern PVOPS will only parse P state information from the
+ * DSDT and return it to Xen if EIST is seen in the emulated
+ * CPUID information.
+ */
+ if ( cpu_has_eist )
+ c |= cpufeat_mask(X86_FEATURE_EIST);
+ }
}
- if ( !cpu_has_apic )
- __clear_bit(X86_FEATURE_X2APIC % 32, &c);
- __set_bit(X86_FEATURE_HYPERVISOR % 32, &c);
+
+ c |= cpufeat_mask(X86_FEATURE_HYPERVISOR);
break;
case 0x00000007:
if ( subleaf == 0 )
- b &= (cpufeat_mask(X86_FEATURE_BMI1) |
- cpufeat_mask(X86_FEATURE_HLE) |
- cpufeat_mask(X86_FEATURE_AVX2) |
- cpufeat_mask(X86_FEATURE_BMI2) |
- cpufeat_mask(X86_FEATURE_ERMS) |
- cpufeat_mask(X86_FEATURE_RTM) |
- cpufeat_mask(X86_FEATURE_RDSEED) |
- cpufeat_mask(X86_FEATURE_ADX) |
- cpufeat_mask(X86_FEATURE_FSGSBASE));
+ {
+ /* Fold host's FDP_EXCP_ONLY and NO_FPU_SEL into guest's view. */
+ b &= (pv_featureset[FEATURESET_7b0] &
+ ~special_features[FEATURESET_7b0]);
+ b |= (host_featureset[FEATURESET_7b0] &
+ special_features[FEATURESET_7b0]);
+
+ c &= pv_featureset[FEATURESET_7c0];
+
+ if ( !is_pvh_domain(currd) )
+ {
+ /*
+ * Delete the PVH condition when HVMLite formally replaces PVH,
+ * and HVM guests no longer enter a PV codepath.
+ */
+
+ /* OSPKE cleared by pv_featureset. Fast-forward CR4 back in.
*/
+ if ( curr->arch.pv_vcpu.ctrlreg[4] & X86_CR4_PKE )
+ c |= cpufeat_mask(X86_FEATURE_OSPKE);
+ }
+ }
else
- b = 0;
- a = c = d = 0;
+ b = c = 0;
+ a = d = 0;
break;
case XSTATE_CPUID:
@@ -1008,37 +1102,49 @@ void pv_cpuid(struct cpu_user_regs *regs)
}
case 1:
- a &=
(boot_cpu_data.x86_capability[cpufeat_word(X86_FEATURE_XSAVEOPT)] &
- ~cpufeat_mask(X86_FEATURE_XSAVES));
+ a &= pv_featureset[FEATURESET_Da1];
b = c = d = 0;
break;
}
break;
case 0x80000001:
- /* Modify Feature Information. */
+ c &= pv_featureset[FEATURESET_e1c];
+ d &= pv_featureset[FEATURESET_e1d];
+
+ /* If not emulating AMD, clear the duplicated features in e1d. */
+ if ( currd->arch.x86_vendor != X86_VENDOR_AMD )
+ d &= ~CPUID_COMMON_1D_FEATURES;
+
+ /*
+ * MTRR used to unconditionally leak into PV guests. They cannot MTRR
+ * infrastructure at all, and shouldn't be able to see the feature.
+ *
+ * Modern PVOPS Linux self-clobbers the MTRR feature, to avoid trying
+ * to use the associated MSRs. Xenolinux-based PV dom0's however use
+ * the MTRR feature as an indication of the presence of the
+ * XENPF_{add,del,read}_memtype hypercalls.
+ */
+ if ( is_hardware_domain(currd) && guest_kernel_mode(curr, regs) &&
+ cpu_has_mtrr )
+ d |= cpufeat_mask(X86_FEATURE_MTRR);
+
if ( is_pv_32bit_domain(currd) )
{
- __clear_bit(X86_FEATURE_LM % 32, &d);
- __clear_bit(X86_FEATURE_LAHF_LM % 32, &c);
+ d &= ~cpufeat_mask(X86_FEATURE_LM);
+ c &= ~cpufeat_mask(X86_FEATURE_LAHF_LM);
+
+ if ( boot_cpu_data.x86_vendor != X86_VENDOR_AMD )
+ d &= ~cpufeat_mask(X86_FEATURE_SYSCALL);
}
- if ( is_pv_32bit_domain(currd) &&
- boot_cpu_data.x86_vendor != X86_VENDOR_AMD )
- __clear_bit(X86_FEATURE_SYSCALL % 32, &d);
- __clear_bit(X86_FEATURE_PAGE1GB % 32, &d);
- __clear_bit(X86_FEATURE_RDTSCP % 32, &d);
-
- __clear_bit(X86_FEATURE_SVM % 32, &c);
- if ( !cpu_has_apic )
- __clear_bit(X86_FEATURE_EXTAPIC % 32, &c);
- __clear_bit(X86_FEATURE_OSVW % 32, &c);
- __clear_bit(X86_FEATURE_IBS % 32, &c);
- __clear_bit(X86_FEATURE_SKINIT % 32, &c);
- __clear_bit(X86_FEATURE_WDT % 32, &c);
- __clear_bit(X86_FEATURE_LWP % 32, &c);
- __clear_bit(X86_FEATURE_NODEID_MSR % 32, &c);
- __clear_bit(X86_FEATURE_TOPOEXT % 32, &c);
- __clear_bit(X86_FEATURE_MONITORX % 32, &c);
+ break;
+
+ case 0x80000007:
+ d &= pv_featureset[FEATURESET_e7d];
+ break;
+
+ case 0x80000008:
+ b &= pv_featureset[FEATURESET_e8b];
break;
case 0x0000000a: /* Architectural Performance Monitor Features (Intel) */
diff --git a/xen/include/asm-x86/cpufeature.h b/xen/include/asm-x86/cpufeature.h
index e29b024..6a08579 100644
--- a/xen/include/asm-x86/cpufeature.h
+++ b/xen/include/asm-x86/cpufeature.h
@@ -81,6 +81,8 @@
#define cpu_has_xsavec boot_cpu_has(X86_FEATURE_XSAVEC)
#define cpu_has_xgetbv1 boot_cpu_has(X86_FEATURE_XGETBV1)
#define cpu_has_xsaves boot_cpu_has(X86_FEATURE_XSAVES)
+#define cpu_has_monitor boot_cpu_has(X86_FEATURE_MONITOR)
+#define cpu_has_eist boot_cpu_has(X86_FEATURE_EIST)
enum _cache_type {
CACHE_TYPE_NULL = 0,
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |