[Xen-devel] [RFC 04/16] xen/arm: arm64: Import flush_icache_range from Linux v4.6-rc3

[Julien Grall <julien.grall@xxxxxxx>]

Flushing the icache will required when the support Xen patching will be
added.

Also import the macro icache_line_size which is used by
flush_icache_range.

Signed-off-by: Julien Grall <julien.grall@xxxxxxx>
---
 xen/arch/arm/arm64/cache.S | 45 +++++++++++++++++++++++++++++++++++++++++++++
 xen/include/asm-arm/page.h |  2 ++
 2 files changed, 47 insertions(+)

diff --git a/xen/arch/arm/arm64/cache.S b/xen/arch/arm/arm64/cache.S
index eff4e16..bc5a8f7 100644
--- a/xen/arch/arm/arm64/cache.S
+++ b/xen/arch/arm/arm64/cache.S
@@ -30,6 +30,51 @@
        .endm
 
 /*
+ * icache_line_size - get the minimum I-cache line size from the CTR register.
+ */
+       .macro  icache_line_size, reg, tmp
+       mrs     \tmp, ctr_el0                   // read CTR
+       and     \tmp, \tmp, #0xf                // cache line size encoding
+       mov     \reg, #4                        // bytes per word
+       lsl     \reg, \reg, \tmp                // actual cache line size
+       .endm
+
+/*
+ *     flush_icache_range(start,end)
+ *
+ *     Ensure that the I and D caches are coherent within specified region.
+ *     This is typically used when code has been written to a memory region,
+ *     and will be executed.
+ *
+ *     - start   - virtual start address of region
+ *     - end     - virtual end address of region
+ */
+ENTRY(flush_icache_range)
+       dcache_line_size x2, x3
+       sub     x3, x2, #1
+       bic     x4, x0, x3
+1:
+       dc      cvau, x4                // clean D line to PoU
+       add     x4, x4, x2
+       cmp     x4, x1
+       b.lo    1b
+       dsb     ish
+
+       icache_line_size x2, x3
+       sub     x3, x2, #1
+       bic     x4, x0, x3
+1:
+       ic      ivau, x4                // invalidate I line PoU
+       add     x4, x4, x2
+       cmp     x4, x1
+       b.lo    1b
+       dsb     ish
+       isb
+       mov     x0, #0
+       ret
+ENDPROC(flush_icache_range)
+
+/*
  *     __flush_dcache_area(kaddr, size)
  *
  *     Ensure that the data held in the page kaddr is written back to the
diff --git a/xen/include/asm-arm/page.h b/xen/include/asm-arm/page.h
index 05d9f82..a94e826 100644
--- a/xen/include/asm-arm/page.h
+++ b/xen/include/asm-arm/page.h
@@ -328,6 +328,8 @@ static inline int clean_and_invalidate_dcache_va_range
     return 0;
 }
 
+int flush_icache_range(unsigned long start, unsigned long end);
+
 /* Macros for flushing a single small item.  The predicate is always
  * compile-time constant so this will compile down to 3 instructions in
  * the common case. */
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel