|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [RFC 10/16] xen/arm: Introduce alternative runtime patching
Some of the processor erratum will require to modify code sequence.
As those modifications may impact the performance, they should only
be enabled on affected cores. Furthermore, Xen may also want to take
advantage of new hardware features coming up with v8.1 and v8.2.
This patch adds an infrastructure to patch Xen during boot time
depending on the "features" available on the platform.
This code is based on the file arch/arm64/kernel/alternative.c in
Linux 4.6-rc3. Any references to arm64 have been dropped to make the
code as generic as possible.
Furthermore, in Xen the executable sections (.text and .init.text)
are always mapped read-only and enforced by SCTLR.WNX. So it is not
possible to directly patch Xen.
To by-pass this restriction, a temporary writeable mapping is made with
vmap. This mapping will be used to write the new instructions.
Lastly, runtime patching is currently not necessary for ARM32. So the
code is only enabled for ARM64.
Signed-off-by: Julien Grall <julien.grall@xxxxxxx>
---
xen/arch/arm/Kconfig | 5 +
xen/arch/arm/Makefile | 1 +
xen/arch/arm/alternative.c | 217 ++++++++++++++++++++++++++++++++++++++
xen/arch/arm/setup.c | 8 ++
xen/arch/arm/xen.lds.S | 7 ++
xen/include/asm-arm/alternative.h | 165 +++++++++++++++++++++++++++++
xen/include/asm-arm/arm64/insn.h | 16 +++
7 files changed, 419 insertions(+)
create mode 100644 xen/arch/arm/alternative.c
create mode 100644 xen/include/asm-arm/alternative.h
diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig
index 6231cd5..9b3e66b 100644
--- a/xen/arch/arm/Kconfig
+++ b/xen/arch/arm/Kconfig
@@ -14,6 +14,7 @@ config ARM_64
def_bool y
depends on 64BIT
select HAS_GICV3
+ select ALTERNATIVE
config ARM
def_bool y
@@ -46,6 +47,10 @@ config ACPI
config HAS_GICV3
bool
+# Select ALTERNATIVE if the architecture supports runtime patching
+config ALTERNATIVE
+ bool
+
endmenu
source "common/Kconfig"
diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
index 9122f78..2d330aa 100644
--- a/xen/arch/arm/Makefile
+++ b/xen/arch/arm/Makefile
@@ -4,6 +4,7 @@ subdir-y += platforms
subdir-$(CONFIG_ARM_64) += efi
subdir-$(CONFIG_ACPI) += acpi
+obj-$(CONFIG_ALTERNATIVE) += alternative.o
obj-y += bootfdt.o
obj-y += cpu.o
obj-y += cpufeature.o
diff --git a/xen/arch/arm/alternative.c b/xen/arch/arm/alternative.c
new file mode 100644
index 0000000..0a5d1c8
--- /dev/null
+++ b/xen/arch/arm/alternative.c
@@ -0,0 +1,217 @@
+/*
+ * alternative runtime patching
+ * inspired by the x86 version
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <xen/config.h>
+#include <xen/init.h>
+#include <xen/types.h>
+#include <xen/kernel.h>
+#include <xen/mm.h>
+#include <xen/vmap.h>
+#include <xen/smp.h>
+#include <xen/stop_machine.h>
+#include <asm/alternative.h>
+#include <asm/atomic.h>
+#include <asm/byteorder.h>
+#include <asm/cpufeature.h>
+#include <asm/insn.h>
+#include <asm/page.h>
+
+#define __ALT_PTR(a,f) (u32 *)((void *)&(a)->f + (a)->f)
+#define ALT_ORIG_PTR(a) __ALT_PTR(a, orig_offset)
+#define ALT_REPL_PTR(a) __ALT_PTR(a, alt_offset)
+
+extern const struct alt_instr __alt_instructions[], __alt_instructions_end[];
+
+struct alt_region {
+ const struct alt_instr *begin;
+ const struct alt_instr *end;
+};
+
+/*
+ * Check if the target PC is within an alternative block.
+ */
+static bool_t branch_insn_requires_update(const struct alt_instr *alt,
+ unsigned long pc)
+{
+ unsigned long replptr;
+
+ if ( is_active_kernel_text(pc) )
+ return 1;
+
+ replptr = (unsigned long)ALT_REPL_PTR(alt);
+ if ( pc >= replptr && pc <= (replptr + alt->alt_len) )
+ return 0;
+
+ /*
+ * Branching into *another* alternate sequence is doomed, and
+ * we're not even trying to fix it up.
+ */
+ BUG();
+}
+
+static u32 get_alt_insn(const struct alt_instr *alt,
+ const u32 *insnptr, const u32 *altinsnptr)
+{
+ u32 insn;
+
+ insn = le32_to_cpu(*altinsnptr);
+
+ if ( insn_is_branch_imm(insn) )
+ {
+ s32 offset = insn_get_branch_offset(insn);
+ unsigned long target;
+
+ target = (unsigned long)altinsnptr + offset;
+
+ /*
+ * If we're branching inside the alternate sequence,
+ * do not rewrite the instruction, as it is already
+ * correct. Otherwise, generate the new instruction.
+ */
+ if ( branch_insn_requires_update(alt, target) )
+ {
+ offset = target - (unsigned long)insnptr;
+ insn = insn_set_branch_offset(insn, offset);
+ }
+ }
+
+ return insn;
+}
+
+static int __apply_alternatives(const struct alt_region *region)
+{
+ const struct alt_instr *alt;
+ const u32 *origptr, *replptr;
+ u32 *writeptr, *writemap;
+ mfn_t text_mfn = _mfn(virt_to_mfn(_stext));
+ unsigned int text_order = get_order_from_bytes(_end - _start);
+
+ printk("Patching kernel code\n");
+
+ /*
+ * The text section is read-only. So re-map Xen to be able to patch
+ * the code.
+ */
+ writemap = __vmap(&text_mfn, 1 << text_order, 1, 1, PAGE_HYPERVISOR,
+ VMAP_DEFAULT);
+ if ( !writemap )
+ {
+ printk("alternatives: Unable to map the text section\n");
+ return -ENOMEM;
+ }
+
+ for ( alt = region->begin; alt < region->end; alt++ )
+ {
+ u32 insn;
+ int i, nr_inst;
+
+ if ( !cpus_have_cap(alt->cpufeature) )
+ continue;
+
+ BUG_ON(alt->alt_len != alt->orig_len);
+
+ origptr = ALT_ORIG_PTR(alt);
+ writeptr = origptr - (u32 *)_start + writemap;
+ replptr = ALT_REPL_PTR(alt);
+
+ nr_inst = alt->alt_len / sizeof(insn);
+
+ for ( i = 0; i < nr_inst; i++ )
+ {
+ insn = get_alt_insn(alt, origptr + i, replptr + i);
+ *(writeptr + i) = cpu_to_le32(insn);
+ }
+
+ /* Ensure the new instructions reached the memory and nuke */
+ clean_and_invalidate_dcache_va_range(writeptr,
+ (sizeof (*writeptr) * nr_inst));
+ }
+
+ /* Nuke the instruction cache */
+ invalidate_icache();
+
+ vunmap(writemap);
+
+ return 0;
+}
+
+/*
+ * We might be patching the stop_machine state machine, so implement a
+ * really simple polling protocol here.
+ */
+static int __apply_alternatives_multi_stop(void *unused)
+{
+ static int patched = 0;
+ struct alt_region region = {
+ .begin = __alt_instructions,
+ .end = __alt_instructions_end,
+ };
+
+ /* We always have a CPU 0 at this point (__init) */
+ if ( smp_processor_id() )
+ {
+ while ( !read_atomic(&patched) )
+ cpu_relax();
+ isb();
+ }
+ else
+ {
+ int ret;
+
+ BUG_ON(patched);
+ ret = __apply_alternatives(®ion);
+ /* The patching is not expected to fail during boot. */
+ BUG_ON(ret != 0);
+
+ /* Barriers provided by the cache flushing */
+ write_atomic(&patched, 1);
+ }
+
+ return 0;
+}
+
+void __init apply_alternatives_all(void)
+{
+ int ret;
+
+ /* better not try code patching on a live SMP system */
+ ret = stop_machine_run(__apply_alternatives_multi_stop, NULL, NR_CPUS);
+
+ /* stop_machine_run should never fail at this stage of the boot */
+ BUG_ON(ret);
+}
+
+int apply_alternatives(void *start, size_t length)
+{
+ struct alt_region region = {
+ .begin = start,
+ .end = start + length,
+ };
+
+ return __apply_alternatives(®ion);
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index 09ff1ea..c4389ef 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -38,6 +38,7 @@
#include <xen/vmap.h>
#include <xen/libfdt/libfdt.h>
#include <xen/acpi.h>
+#include <asm/alternative.h>
#include <asm/page.h>
#include <asm/current.h>
#include <asm/setup.h>
@@ -834,6 +835,13 @@ void __init start_xen(unsigned long boot_phys_offset,
do_initcalls();
+ /*
+ * It needs to be called after do_initcalls to be able to use
+ * stop_machine (tasklets initialized via an initcall).
+ * XXX: Is it too late?
+ */
+ apply_alternatives_all();
+
/* Create initial domain 0. */
/* The vGIC for DOM0 is exactly emulating the hardware GIC */
config.gic_version = XEN_DOMCTL_CONFIG_GIC_NATIVE;
diff --git a/xen/arch/arm/xen.lds.S b/xen/arch/arm/xen.lds.S
index 1f010bd..80d9703 100644
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -167,6 +167,13 @@ SECTIONS
*(.xsm_initcall.init)
__xsm_initcall_end = .;
} :text
+#ifdef CONFIG_ALTERNATIVE
+ .init.alternatives : {
+ __alt_instructions = .;
+ *(.altinstructions)
+ __alt_instructions_end = .;
+ }
+#endif
__init_end_efi = .;
. = ALIGN(STACK_SIZE);
__init_end = .;
diff --git a/xen/include/asm-arm/alternative.h
b/xen/include/asm-arm/alternative.h
new file mode 100644
index 0000000..7e3a610
--- /dev/null
+++ b/xen/include/asm-arm/alternative.h
@@ -0,0 +1,165 @@
+#ifndef __ASM_ALTERNATIVE_H
+#define __ASM_ALTERNATIVE_H
+
+#include <asm/cpufeature.h>
+#include <xen/config.h>
+#include <xen/kconfig.h>
+
+#ifdef CONFIG_ALTERNATIVE
+
+#ifndef __ASSEMBLY__
+
+#include <xen/init.h>
+#include <xen/types.h>
+#include <xen/stringify.h>
+
+struct alt_instr {
+ s32 orig_offset; /* offset to original instruction */
+ s32 alt_offset; /* offset to replacement instruction */
+ u16 cpufeature; /* cpufeature bit set for replacement */
+ u8 orig_len; /* size of original instruction(s) */
+ u8 alt_len; /* size of new instruction(s), <= orig_len */
+};
+
+void __init apply_alternatives_all(void);
+int apply_alternatives(void *start, size_t length);
+
+#define ALTINSTR_ENTRY(feature)
\
+ " .word 661b - .\n" /* label */ \
+ " .word 663f - .\n" /* new instruction */ \
+ " .hword " __stringify(feature) "\n" /* feature bit */ \
+ " .byte 662b-661b\n" /* source len */ \
+ " .byte 664f-663f\n" /* replacement len */
+
+/*
+ * alternative assembly primitive:
+ *
+ * If any of these .org directive fail, it means that insn1 and insn2
+ * don't have the same length. This used to be written as
+ *
+ * .if ((664b-663b) != (662b-661b))
+ * .error "Alternatives instruction length mismatch"
+ * .endif
+ *
+ * but most assemblers die if insn1 or insn2 have a .inst. This should
+ * be fixed in a binutils release posterior to 2.25.51.0.2 (anything
+ * containing commit 4e4d08cf7399b606 or c1baaddf8861).
+ */
+#define __ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg_enabled) \
+ ".if "__stringify(cfg_enabled)" == 1\n" \
+ "661:\n\t" \
+ oldinstr "\n" \
+ "662:\n" \
+ ".pushsection .altinstructions,\"a\"\n" \
+ ALTINSTR_ENTRY(feature) \
+ ".popsection\n" \
+ ".pushsection .altinstr_replacement, \"a\"\n" \
+ "663:\n\t" \
+ newinstr "\n" \
+ "664:\n\t" \
+ ".popsection\n\t" \
+ ".org . - (664b-663b) + (662b-661b)\n\t" \
+ ".org . - (662b-661b) + (664b-663b)\n" \
+ ".endif\n"
+
+#define _ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg, ...) \
+ __ALTERNATIVE_CFG(oldinstr, newinstr, feature, IS_ENABLED(cfg))
+
+#else
+
+#include <asm/asm_defns.h>
+
+.macro altinstruction_entry orig_offset alt_offset feature orig_len alt_len
+ .word \orig_offset - .
+ .word \alt_offset - .
+ .hword \feature
+ .byte \orig_len
+ .byte \alt_len
+.endm
+
+.macro alternative_insn insn1, insn2, cap, enable = 1
+ .if \enable
+661: \insn1
+662: .pushsection .altinstructions, "a"
+ altinstruction_entry 661b, 663f, \cap, 662b-661b, 664f-663f
+ .popsection
+ .pushsection .altinstr_replacement, "ax"
+663: \insn2
+664: .popsection
+ .org . - (664b-663b) + (662b-661b)
+ .org . - (662b-661b) + (664b-663b)
+ .endif
+.endm
+
+/*
+ * Begin an alternative code sequence.
+ *
+ * The code that follows this macro will be assembled and linked as
+ * normal. There are no restrictions on this code.
+ */
+.macro alternative_if_not cap, enable = 1
+ .if \enable
+ .pushsection .altinstructions, "a"
+ altinstruction_entry 661f, 663f, \cap, 662f-661f, 664f-663f
+ .popsection
+661:
+ .endif
+.endm
+
+/*
+ * Provide the alternative code sequence.
+ *
+ * The code that follows this macro is assembled into a special
+ * section to be used for dynamic patching. Code that follows this
+ * macro must:
+ *
+ * 1. Be exactly the same length (in bytes) as the default code
+ * sequence.
+ *
+ * 2. Not contain a branch target that is used outside of the
+ * alternative sequence it is defined in (branches into an
+ * alternative sequence are not fixed up).
+ */
+.macro alternative_else
+662: .pushsection .altinstr_replacement, "ax"
+663:
+.endm
+
+/*
+ * Complete an alternative code sequence.
+ */
+.macro alternative_endif
+664: .popsection
+ .org . - (664b-663b) + (662b-661b)
+ .org . - (662b-661b) + (664b-663b)
+.endm
+
+#define _ALTERNATIVE_CFG(insn1, insn2, cap, cfg, ...) \
+ alternative_insn insn1, insn2, cap, IS_ENABLED(cfg)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Usage: asm(ALTERNATIVE(oldinstr, newinstr, feature));
+ *
+ * Usage: asm(ALTERNATIVE(oldinstr, newinstr, feature, CONFIG_FOO));
+ * N.B. If CONFIG_FOO is specified, but not selected, the whole block
+ * will be omitted, including oldinstr.
+ */
+#define ALTERNATIVE(oldinstr, newinstr, ...) \
+ _ALTERNATIVE_CFG(oldinstr, newinstr, __VA_ARGS__, 1)
+
+#else /* !CONFIG_ALTERNATIVE */
+
+static inline void apply_alternatives_all(void)
+{
+}
+
+int apply_alternatives(void *start, size_t lenght)
+{
+ return 0;
+}
+
+#endif
+
+#endif /* __ASM_ALTERNATIVE_H */
diff --git a/xen/include/asm-arm/arm64/insn.h b/xen/include/asm-arm/arm64/insn.h
index cfcdbe9..6ce37be 100644
--- a/xen/include/asm-arm/arm64/insn.h
+++ b/xen/include/asm-arm/arm64/insn.h
@@ -61,6 +61,22 @@ u32 aarch64_insn_encode_immediate(enum aarch64_insn_imm_type
type,
s32 aarch64_get_branch_offset(u32 insn);
u32 aarch64_set_branch_offset(u32 insn, s32 offset);
+/* Wrapper for common code */
+static inline bool insn_is_branch_imm(u32 insn)
+{
+ return aarch64_insn_is_branch_imm(insn);
+}
+
+static inline s32 insn_get_branch_offset(u32 insn)
+{
+ return aarch64_get_branch_offset(insn);
+}
+
+static inline u32 insn_set_branch_offset(u32 insn, s32 offset)
+{
+ return aarch64_set_branch_offset(insn, offset);
+}
+
#endif /* !__ARCH_ARM_ARM64_INSN */
/*
* Local variables:
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |