|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Running Xen on Nvidia Jetson-TK1
On Thu, Apr 14, 2016 at 11:54 AM, Dushyant Behl <myselfdushyantbehl@xxxxxxxxx> wrote: > Hi Everyone, > > On Fri, Apr 8, 2016 at 5:57 PM, Ian Campbell <ijc@xxxxxxxxxxxxxx> wrote: >>> > In your patch for *Hacky* support for Jetsok-TK1 you said that you >>> > were able to run guests on >>> > Jetson-tk1 board with Xen. Can I know which kernel version you used as >>> > dom0 (and possibly domU guests)? >> >> I'm afraid I don't remember. It would probably either have been some >> current-ish upstream kernel from the time, or possibly a Debian kernel >> from around the time. So maybe something 3.16-ish? > > @Ian Thanks for the Reply. > > @Julien, Thanks a lot, your patch for GIC dtb node worked and the > linux kernel is now able to enable the arch timer. > (Although I needed to modify the code manually as the tree I'm using > is older Xen-4.6, and maybe the patch was against the latest version > of xen). > > The kernel is able to initialize itself but it fails while initializing some > nvidia devices in the boot process. I've posted the log here, Thanks to Dyshyant's help, I see the similar log as Dushyant attached in his email. > Could this also be an issue with the device tree or this is something > related to the kernel? I plan to try the L4T kernel and see if the problem still exist. But I have a quick question: With the following kernel booting log, did your dom0 boot up successfully? I mean, can you log into your dom0 now? > > - UART enabled - > - CPU 00000000 booting - > - Xen starting in Hyp mode - > - Zero BSS - > - Setting up control registers - > - Turning on paging - > - Ready - > (XEN) Checking for initrd in /chosen > (XEN) RAM: 0000000080000000 - 00000000ffefffff > (XEN) > (XEN) MODULE[0]: 0000000082000000 - 0000000082010000 Device Tree > (XEN) MODULE[1]: 0000000081000000 - 00000000815443f0 Kernel > console=hvc0 root=/dev/mmcblk0p1 rw rootwait > (XEN) RESVD[0]: 0000000082000000 - 0000000082010000 > (XEN) > (XEN) Command line: console=dtuart dtuart=serial0 dom0_mem=512M > sync_console log_lvl=all guest_loglvl=all > (XEN) Placing Xen at 0x00000000ffc00000-0x00000000ffe00000 > (XEN) Update BOOTMOD_XEN from 00000000fd000000-00000000fd0f9701 => > 00000000ffc00000-00000000ffcf9701 > (XEN) Xen heap: 00000000fa000000-00000000fe000000 (16384 pages) > (XEN) Dom heap: 507648 pages > (XEN) Domain heap initialised > (XEN) Platform: TEGRA124 > (XEN) Looking for dtuart at "s Xen 4.6-unstable > (XEN) Xen version 4.6-unstable (root@) (arm-linux-gnueabihf-gcc > (Ubuntu/Linaro 4.7.3-11ubuntu1) 4.7.3) debug=y Mon Apr 11 09:20:25 UTC > 2016 > (XEN) Latest ChangeSet: > (XEN) Console output is synchronous. > (XEN) Processor: 413fc0f3: "ARM Limited", variant: 0x3, part 0xc0f, rev 0x3 > (XEN) 32-bit Execution: > (XEN) Processor Features: 00001131:00011011 > (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jazelle > (XEN) Extensions: GenericTimer Security > (XEN) Debug Features: 02010555 > (XEN) Auxiliary Features: 00000000 > (XEN) Memory Model Features: 10201105 40000000 01240000 02102211 > (XEN) ISA Features: 02101110 13112111 21232041 11112131 10011142 00000000 > (XEN) Using PSCI-0.1 for SMP bringup > (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 12000 KHz > (XEN) GICv2 initialization: > (XEN) gic_dist_addr=0000000050041000 > (XEN) gic_cpu_addr=0000000050042000 > (XEN) gic_hyp_addr=0000000050044000 > (XEN) gic_vcpu_addr=0000000050046000 > (XEN) gic_maintenance_irq=25 > (XEN) GICv2: 192 lines, 4 cpus, secure (IID 0000043b). > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) I/O virtualisation disabled > (XEN) Allocated console ring of 32 KiB. > (XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0 > (XEN) Bringing up CPU1 > - CPU 00000001 booting - > - Xen starting in Hyp mode - > - Setting up control registers - > - Turning on paging - > - Ready - > (XEN) CPU 1 booted. > (XEN) Bringing up CPU2 > - CPU 00000002 booting - > - Xen starting in Hyp mode - > - Setting up control registers - > - Turning on paging - > - Ready - > (XEN) CPU 2 booted. > (XEN) Bringing up CPU3 > - CPU 00000003 booting - > - Xen starting in Hyp mode - > - Setting up control registers - > - Turning on paging - > - Ready - > (XEN) CPU 3 booted. > (XEN) Brought up 4 CPUs > (XEN) P2M: 40-bit IPA > (XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558 > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Loading kernel from boot module @ 0000000081000000 > (XEN) zImage: no appended dtb > (XEN) zImage32 Probe successful > (XEN) Allocating 1:1 mappings totalling 512MB for dom0: > (XEN) BANK[0] 0x000000a0000000-0x000000c0000000 (512MB) > (XEN) Additional MMIO 40000-40040 (IRAM) > (XEN) Additional MMIO 54200-54240 (Display A) > (XEN) Additional MMIO 54240-54280 (Display B) > (XEN) Additional MMIO 6000f-60010 (EXCEPTION VECTORS) > (XEN) Additional MMIO 6000c-6000d (SYSREG) > (XEN) Additional MMIO 1000-1001 (PCI CFG0) > (XEN) Additional MMIO 1001-1002 (PCI CFG1) > (XEN) Additional MMIO 12000-12010 (PCI IO) > (XEN) Additional MMIO 13000-20000 (PCI MEM) > (XEN) Additional MMIO 20000-40000 (PCI MEM (PREFETCH)) > (XEN) Additional IRQ 105 (DISPLAY) > (XEN) TEGRA: Routing IRQ105 to dom0, ICTLR2, mask 0x000200 > (XEN) Additional IRQ 106 (DISPLAY B) > (XEN) TEGRA: Routing IRQ106 to dom0, ICTLR2, mask 0x000400 > (XEN) Loading zImage from 0000000081000000 to > 00000000a7a00000-00000000a7f443f0 > (XEN) Allocating PPI 16 for event channel interrupt > (XEN) Loading dom0 DTB to 0x00000000a8000000-0x00000000a800f1d0 > (XEN) Scrubbing Free RAM on 1 nodes using 4 CPUs > (XEN) ....done. > (XEN) Initial low memory virq threshold set at 0x4000 pages. > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) ********************************************** > (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS > (XEN) ******* This option is intended to aid debugging of Xen by ensuring > (XEN) ******* that all output is synchronously delivered on the serial line. > (XEN) ******* However it can introduce SIGNIFICANT latencies and affect > (XEN) ******* timekeeping. It is NOT recommended for production use! > (XEN) ********************************************** > (XEN) 3... 2... 1... > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch > input to Xen) > (XEN) Freed 272kB init memory. > (XEN) DOM0: Uncompressing Linux... done, booting the kernel. > [ 0.000000] Booting Linux on physical CPU 0x0 > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 4.1.0-196898-g2e68ed9-dirty > (root@ubuntu-server) (gcc version 4.7.3 (Ubuntu/Linaro > 4.7.3-11ubuntu1) ) #3 SMP PREEMPT Wed Apr 13 08:28:23 UTC 2016 > [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=30c5387d > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache > [ 0.000000] Machine model: NVIDIA Tegra124 Jetson TK1 > [ 0.000000] cma: Reserved 64 MiB at 0x00000000bc000000 > [ 0.000000] Forcing write-allocate cache policy for SMP > [ 0.000000] Memory policy: Data cache writealloc > [ 0.000000] psci: probing for conduit method from DT. > [ 0.000000] psci: PSCIv0.2 detected in firmware. > [ 0.000000] psci: Using standard PSCI v0.2 function IDs > [ 0.000000] PERCPU: Embedded 12 pages/cpu @dbb77000 s19712 r8192 > d21248 u49152 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 130048 > [ 0.000000] Kernel command line: console=hvc0 root=/dev/mmcblk0p1 rw > rootwait > [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > [ 0.000000] Memory: 441884K/524288K available (7657K kernel code, > 634K rwdata, 2584K rodata, 484K init, 383K bss, 16868K reserved, > 65536K cma-reserved, 0K highmem) > [ 0.000000] Virtual kernel memory layout: > [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) > [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) > [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) > [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) > [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) > [ 0.000000] .text : 0xc0008000 - 0xc0a08c10 (10244 kB) > [ 0.000000] .init : 0xc0a09000 - 0xc0a82000 ( 484 kB) > [ 0.000000] .data : 0xc0a82000 - 0xc0b20bec ( 635 kB) > [ 0.000000] .bss : 0xc0b23000 - 0xc0b82ea0 ( 384 kB) > [ 0.000000] Preemptible hierarchical RCU implementation. > [ 0.000000] Build-time adjustment of leaf fanout to 32. > [ 0.000000] NR_IRQS:16 nr_irqs:16 16 > [ 0.000000] /interrupt-controller@60004000: 160 interrupts > forwarded to /interrupt-controller > [ 0.000000] L2C: failed to init: -19 > [ 0.000000] Architected cp15 timer(s) running at 12.00MHz (virt). > [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff > max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns > [ 0.000005] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps > every 4398046511096ns > [ 0.000018] Switching to timer-based delay loop, resolution 83ns > [ 0.000500] Console: colour dummy device 80x30 > [ 0.000521] Calibrating delay loop (skipped), value calculated > using timer frequency.. 24.00 BogoMIPS (lpj=120000) > [ 0.000536] pid_max: default: 32768 minimum: 301 > [ 0.000948] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.000959] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 > bytes) > [ 0.002350] Initializing cgroup subsys freezer > [ 0.002376] Initializing cgroup subsys debug > [ 0.002431] CPU: Testing write buffer coherency: ok > [ 0.002752] /cpus/cpu@0 missing clock-frequency property > [ 0.002794] /cpus/cpu@1 missing clock-frequency property > [ 0.002835] /cpus/cpu@2 missing clock-frequency property > [ 0.002877] /cpus/cpu@3 missing clock-frequency property > [ 0.002890] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 > [ 0.003106] Xen 4.6 support found, events_irq=19 > gnttab_frame=0x0000000068000000 > [ 0.003265] xen:grant_table: Grant tables using version 1 layout > [ 0.003313] Grant table initialized > [ 0.003378] xen:events: Using FIFO-based ABI > [ 0.003398] Xen: initializing cpu0 > [ 0.003496] Setting up static identity map for 0xa0008480 - 0xa0008518 > [ 0.020405] Tegra Revision: A01 SKU: 129 CPU Process: 1 Core Process: 1 > [ 0.030786] Xen: initializing cpu1 > [ 0.030840] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 > [ 0.040798] Xen: initializing cpu2 > [ 0.040851] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 > [ 0.050839] Xen: initializing cpu3 > [ 0.050890] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 > [ 0.051037] Brought up 4 CPUs > [ 0.051063] SMP: Total of 4 processors activated (96.00 BogoMIPS). > [ 0.051071] CPU: All CPU(s) started in SVC mode. > [ 0.052162] devtmpfs: initialized > [ 0.100284] VFP support v0.3: implementor 41 architecture 4 part 30 > variant f rev 0 > [ 0.101016] clocksource: jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 19112604462750000 ns > [ 0.103189] pinctrl core: initialized pinctrl subsystem > [ 0.105124] NET: Registered protocol family 16 > [ 0.106377] DMA: preallocated 256 KiB pool for atomic coherent allocations > [ 0.108915] xen:swiotlb_xen: Warning: only able to allocate 4 MB > for software IO TLB > [ 0.110050] software IO TLB [mem 0xbac00000-0xbb000000] (4MB) > mapped at [dac00000-daffffff] > [ 0.133440] hw-breakpoint: Failed to enable monitor mode on CPU 1. > [ 0.183494] xen:balloon: Initialising balloon driver > [ 0.184060] xen_balloon: Initialising balloon driver > [ 0.187333] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 > [ 0.187556] reg-fixed-voltage regulators:regulator@7: Failed to > register regulator: -517 > [ 0.188011] +5V_USB_HS: Failed to request enable GPIO109: -517 > [ 0.188224] reg-fixed-voltage regulators:regulator@8: Failed to > register regulator: -517 > [ 0.188785] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 > [ 0.188995] reg-fixed-voltage regulators:regulator@11: Failed to > register regulator: -517 > [ 0.189447] +5V_HDMI_CON: Failed to request enable GPIO86: -517 > [ 0.189655] reg-fixed-voltage regulators:regulator@12: Failed to > register regulator: -517 > [ 0.190105] +5V_SATA: Failed to request enable GPIO242: -517 > [ 0.190352] reg-fixed-voltage regulators:regulator@13: Failed to > register regulator: -517 > [ 0.190806] +12V_SATA: Failed to request enable GPIO242: -517 > [ 0.191013] reg-fixed-voltage regulators:regulator@14: Failed to > register regulator: -517 > [ 0.192568] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 32 > [ 0.192786] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 36 > [ 0.192994] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 40 > [ 0.193217] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 42 > [ 0.193467] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 44 > [ 0.193673] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 48 > [ 0.193892] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 32 > [ 0.194553] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 36 > [ 0.195292] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 40 > [ 0.195949] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 42 > [ 0.196604] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 44 > [ 0.197262] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 48 > [ 0.197974] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 32 > [ 0.200524] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 36 > [ 0.203036] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 40 > [ 0.205604] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 42 > [ 0.208285] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 44 > [ 0.210797] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 48 > [ 0.213295] arm-lpae io-pgtable: selftest: completed with 18 PASS 0 FAIL > [ 0.214020] vgaarb: loaded > [ 0.215731] SCSI subsystem initialized > [ 0.216928] usbcore: registered new interface driver usbfs > [ 0.217108] usbcore: registered new interface driver hub > [ 0.217316] usbcore: registered new device driver usb > [ 0.221769] Linux video capture interface: v2.00 > [ 0.221900] pps_core: LinuxPPS API ver. 1 registered > [ 0.221908] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 > Rodolfo Giometti <giometti@xxxxxxxx> > [ 0.221980] PTP clock support registered > [ 0.223885] Advanced Linux Sound Architecture Driver Initialized. > [ 0.225412] Bluetooth: Core ver 2.20 > [ 0.225493] NET: Registered protocol family 31 > [ 0.225502] Bluetooth: HCI device and connection manager initialized > [ 0.225533] Bluetooth: HCI socket layer initialized > [ 0.225555] Bluetooth: L2CAP socket layer initialized > [ 0.225611] Bluetooth: SCO socket layer initialized > [ 0.226236] cfg80211: Calling CRDA to update world regulatory domain > [ 0.227195] clocksource: Switched to clocksource arch_sys_counter > [ 0.362983] NET: Registered protocol family 2 > [ 0.364477] TCP established hash table entries: 4096 (order: 2, 16384 > bytes) > [ 0.364539] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) > [ 0.364637] TCP: Hash tables configured (established 4096 bind 4096) > [ 0.364907] UDP hash table entries: 256 (order: 1, 8192 bytes) > [ 0.364935] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) > [ 0.365428] NET: Registered protocol family 1 > [ 0.366382] RPC: Registered named UNIX socket transport module. > [ 0.366392] RPC: Registered udp transport module. > [ 0.366399] RPC: Registered tcp transport module. > [ 0.366406] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 0.370824] futex hash table entries: 1024 (order: 4, 65536 bytes) > [ 0.374618] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [ 0.383547] io scheduler noop registered (default) > [ 0.394250] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration > [ 0.394303] tegra-pcie 1003000.pcie-controller: Failed to get > supply 'avddio-pex': -517 > [ 0.406173] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver > register 32 channels > [ 0.406682] tegra-pmc 7000e400.pmc: emergency thermal reset enabled > [ 0.408157] xen:xen_evtchn: Event-channel device installed > [ 1.317385] console [hvc0] enabled > [ 1.320937] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > [ 1.333011] [drm] Initialized drm 1.1.0 20060810 > [ 1.368145] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator > [ 1.388139] loop: module loaded > [ 1.390403] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write > [ 2.387235] tegra-i2c 7000d000.i2c: i2c transfer timed out On my Jetson TK1 board, it starts to fail at this as well, although the log is not exactly the same. I guess that's because we may use different .config file for the same linux repo.. > [ 2.390845] as3722 4-0040: ASIC_ID1 read failed: -110 > [ 2.396044] as3722: probe of 4-0040 failed with error -110 > [ 2.402569] tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517 > [ 2.408180] tegra-ahci 70027000.sata: Failed to get regulators > [ 3.387251] cfg80211: Calling CRDA to update world regulatory domain > [ 3.417234] ------------[ cut here ]------------ > [ 3.419967] WARNING: CPU: 1 PID: 1 at > drivers/spi/spi-tegra114.c:838 > tegra_spi_transfer_one_message+0x410/0x438() > [ 3.430302] Modules linked in: > [ 3.433392] CPU: 1 PID: 1 Comm: swapper/0 Not tainted > 4.1.0-196898-g2e68ed9-dirty #3 > [ 3.441203] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) > [ 3.447560] [<c00177d8>] (unwind_backtrace) from [<c0013040>] > (show_stack+0x10/0x14) > [ 3.455327] [<c0013040>] (show_stack) from [<c073b7e8>] > (dump_stack+0x84/0xd0) > [ 3.462622] [<c073b7e8>] (dump_stack) from [<c0028b84>] > (warn_slowpath_common+0x78/0xb4) > [ 3.470766] [<c0028b84>] (warn_slowpath_common) from [<c0028bdc>] > (warn_slowpath_null+0x1c/0x24) > [ 3.479606] [<c0028bdc>] (warn_slowpath_null) from [<c03ed068>] > (tegra_spi_transfer_one_message+0x410/0x438) > [ 3.489485] [<c03ed068>] (tegra_spi_transfer_one_message) from > [<c03e9d68>] (__spi_pump_messages+0x36c/0x674) > [ 3.499462] [<c03e9d68>] (__spi_pump_messages) from [<c03ea194>] > (__spi_sync+0x124/0x1a8) > [ 3.507701] [<c03ea194>] (__spi_sync) from [<c03ea2ec>] > (spi_write_then_read+0xc4/0x174) > [ 3.515814] [<c03ea2ec>] (spi_write_then_read) from [<c03e6904>] > (m25p80_read_reg+0x34/0x64) > [ 3.524321] [<c03e6904>] (m25p80_read_reg) from [<c03e6fec>] > (spi_nor_read_id+0x20/0xa8) > [ 3.532483] [<c03e6fec>] (spi_nor_read_id) from [<c03e7ac8>] > (spi_nor_scan+0x2a8/0x80c) > [ 3.540524] [<c03e7ac8>] (spi_nor_scan) from [<c03e6840>] > (m25p_probe+0xb0/0x140) > [ 3.548065] [<c03e6840>] (m25p_probe) from [<c03e96c8>] > (spi_drv_probe+0x5c/0x74) > [ 3.555600] [<c03e96c8>] (spi_drv_probe) from [<c037db44>] > (driver_probe_device+0x1c8/0x26c) > [ 3.564106] [<c037db44>] (driver_probe_device) from [<c037c244>] > (bus_for_each_drv+0x44/0x8c) > [ 3.572684] [<c037c244>] (bus_for_each_drv) from [<c037d904>] > (__device_attach+0x88/0xd8) > [ 3.580917] [<c037d904>] (__device_attach) from [<c037d0bc>] > (bus_probe_device+0x84/0x8c) > [ 3.589149] [<c037d0bc>] (bus_probe_device) from [<c037b5fc>] > (device_add+0x33c/0x524) > [ 3.597110] [<c037b5fc>] (device_add) from [<c03e9540>] > (spi_add_device+0x88/0x130) > [ 3.604835] [<c03e9540>] (spi_add_device) from [<c03eab64>] > (of_register_spi_device+0x208/0x2f8) > [ 3.613676] [<c03eab64>] (of_register_spi_device) from [<c03eb034>] > (spi_register_master+0x214/0x444) > [ 3.622950] [<c03eb034>] (spi_register_master) from [<c03eb290>] > (devm_spi_register_master+0x2c/0x68) > [ 3.632222] [<c03eb290>] (devm_spi_register_master) from > [<c03ebdc8>] (tegra_spi_probe+0x29c/0x350) > [ 3.641322] [<c03ebdc8>] (tegra_spi_probe) from [<c037f230>] > (platform_drv_probe+0x48/0xa4) > [ 3.649728] [<c037f230>] (platform_drv_probe) from [<c037db44>] > (driver_probe_device+0x1c8/0x26c) > [ 3.658671] [<c037db44>] (driver_probe_device) from [<c037dc74>] > (__driver_attach+0x8c/0x90) > [ 3.667135] [<c037dc74>] (__driver_attach) from [<c037c2e0>] > (bus_for_each_dev+0x54/0x88) > [ 3.675382] [<c037c2e0>] (bus_for_each_dev) from [<c037d2a0>] > (bus_add_driver+0xe8/0x1f4) > [ 3.683622] [<c037d2a0>] (bus_add_driver) from [<c037e6a0>] > (driver_register+0x78/0xf4) > [ 3.691693] [<c037e6a0>] (driver_register) from [<c00096c4>] > (do_one_initcall+0x80/0x1d0) > [ 3.699908] [<c00096c4>] (do_one_initcall) from [<c0a09dc8>] > (kernel_init_freeable+0x110/0x1dc) > [ 3.708663] [<c0a09dc8>] (kernel_init_freeable) from [<c0736770>] > (kernel_init+0x8/0xec) > [ 3.716795] [<c0736770>] (kernel_init) from [<c000fde8>] > (ret_from_fork+0x14/0x2c) > [ 3.724439] ---[ end trace e92698c5376bfefb ]--- > [ 3.729108] spi-tegra114 7000da00.spi: spi trasfer timeout, err 0 > [ 3.735272] spi_master spi32765: failed to transfer one message from queue > [ 3.742195] m25p80 spi32765.0: error -5 reading 9f > [ 3.747049] m25p80: probe of spi32765.0 failed with error -5 > [ 3.754768] CAN device driver interface > [ 3.756829] igb: Intel(R) Gigabit Ethernet Network Driver - version > 5.2.15-k > [ 3.763827] igb: Copyright (c) 2007-2014 Intel Corporation. > [ 3.769830] xen_netfront: Initialising Xen virtual ethernet driver > [ 3.776009] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB > Ethernet driver > [ 3.783289] usbcore: registered new interface driver pegasus > [ 3.789058] usbcore: registered new interface driver asix > [ 3.794455] usbcore: registered new interface driver ax88179_178a > [ 3.800637] usbcore: registered new interface driver cdc_ether > [ 3.806555] usbcore: registered new interface driver smsc75xx > [ 3.812372] usbcore: registered new interface driver smsc95xx > [ 3.818129] usbcore: registered new interface driver net1080 > [ 3.823837] usbcore: registered new interface driver cdc_subset > [ 3.829849] usbcore: registered new interface driver zaurus > [ 3.835520] usbcore: registered new interface driver cdc_ncm > [ 3.841358] tegra-phy 7d004000.usb-phy: no vbus regulator > [ 3.847023] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 3.853106] ehci-pci: EHCI PCI platform driver > [ 3.857735] tegra-ehci: Tegra EHCI driver > [ 3.862029] tegra-ehci 7d004000.usb: EHCI Host Controller > [ 3.867164] tegra-ehci 7d004000.usb: new USB bus registered, > assigned bus number 1 > [ 3.875088] tegra-ehci 7d004000.usb: irq 342, io mem 0x7d004000 > [ 3.897244] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 > [ 3.903016] hub 1-0:1.0: USB hub found > [ 3.905146] hub 1-0:1.0: 1 port detected > [ 3.910543] usbcore: registered new interface driver cdc_acm > [ 3.914781] cdc_acm: USB Abstract Control Model driver for USB > modems and ISDN adapters > [ 3.923002] usbcore: registered new interface driver cdc_wdm > [ 3.928802] usbcore: registered new interface driver usb-storage > [ 3.935427] mousedev: PS/2 mouse device common for all mice > [ 3.943355] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as > rtc1 > [ 3.948720] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock > [ 3.955257] i2c /dev entries driver > [ 3.960738] usbcore: registered new interface driver uvcvideo > [ 3.964583] USB Video Class driver (1.1.1) > [ 3.968790] gspca_main: v2.14.0 registered > [ 3.973727] 0-004c supply vcc not found, using dummy regulator > [ 4.977235] tegra-i2c 7000c000.i2c: i2c transfer timed out > [ 4.980846] lm90 0-004c: Register 0x4 read failed (-110) > [ 4.986196] lm90 0-004c: Failed to read convrate register! > [ 5.987234] tegra-i2c 7000c000.i2c: i2c transfer timed out > [ 6.547246] cfg80211: Calling CRDA to update world regulatory domain > [ 6.987237] tegra-i2c 7000c000.i2c: i2c transfer timed out > [ 6.990842] lm90 0-004c: Register 0x3 read failed (-110) > [ 6.996198] lm90 0-004c: Initialization failed! > [ 7.002041] sdhci: Secure Digital Host Controller Interface driver > [ 7.007027] sdhci: Copyright(c) Pierre Ossman > [ 7.011481] sdhci-pltfm: SDHCI platform and OF driver helper > [ 7.017580] sdhci-tegra 700b0400.sdhci: Got CD GPIO > [ 7.022128] sdhci-tegra 700b0400.sdhci: Got WP GPIO > [ 7.027105] mmc0: Unknown controller version (3). You may > experience problems. > [ 7.034491] sdhci-tegra 700b0400.sdhci: No vmmc regulator found > [ 7.040550] mmc0: Unknown controller version (3). You may > experience problems. > [ 7.047721] sdhci-tegra 700b0600.sdhci: No vmmc regulator found > [ 7.053570] sdhci-tegra 700b0600.sdhci: No vqmmc regulator found > [ 7.059654] mmc0: Invalid maximum block size, assuming 512 bytes > [ 7.117253] mmc0: SDHCI controller on 700b0600.sdhci > [700b0600.sdhci] using ADMA 64-bit > [ 7.124468] usbcore: registered new interface driver usbhid > [ 7.128999] usbhid: USB HID core driver > [ 8.537237] tegra-i2c 7000c000.i2c: i2c transfer timed out > [ 8.540847] rt5640 0-001c: Device with ID register c0af9d34 is not > rt5640/39 > [ 8.551341] tegra30-i2s 70301100.i2s: DMA channels sourced from > device 70300000.ahub > [ 8.557838] tegra-snd-rt5640 sound: ASoC: CODEC DAI rt5640-aif1 not > registered > [ 8.564464] tegra-snd-rt5640 sound: snd_soc_register_card failed (-517) > [ 8.573237] NET: Registered protocol family 10 > [ 8.577517] mip6: Mobile IPv6 > [ 8.578820] sit: IPv6 over IPv4 tunneling driver > [ 8.586541] NET: Registered protocol family 17 > [ 8.589192] NET: Registered protocol family 15 > [ 8.593603] can: controller area network core (rev 20120528 abi 9) > [ 8.600037] NET: Registered protocol family 29 > [ 8.604351] can: raw protocol (rev 20120528) > [ 8.608697] can: broadcast manager protocol (rev 20120528 t) > [ 8.614418] can: netlink gateway (rev 20130117) max_hops=1 > [ 8.620197] Bluetooth: RFCOMM socket layer initialized > [ 8.625156] Bluetooth: RFCOMM ver 1.11 > [ 8.628991] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 8.634341] Bluetooth: BNEP socket layer initialized > [ 8.639374] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 > [ 8.645349] Bluetooth: HIDP socket layer initialized > [ 8.650678] Registering SWP/SWPB emulation handler > [ 8.661218] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration > [ 8.665886] tegra-pcie 1003000.pcie-controller: Failed to get > supply 'avddio-pex': -517 > [ 8.674354] +5V_SYS: supplied by +VDD_MUX > [ 8.678090] +5V_HDMI_CON: supplied by +5V_SYS > [ 8.682576] reg-fixed-voltage regulators:regulator@11: Failed to > resolve vin-supply for +1.05V_RUN_AVDD_HDMI_PLL > [ 8.692649] tegra-hdmi 54280000.hdmi: failed to get PLL regulator > [ 8.699325] tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517 > [ 8.705454] tegra-ahci 70027000.sata: Failed to get regulators > [ 8.711824] +5V_USB_HS: supplied by +5V_SYS > [ 8.716182] tegra-ehci 7d008000.usb: EHCI Host Controller > [ 8.721165] tegra-ehci 7d008000.usb: new USB bus registered, > assigned bus number 2 > [ 8.729155] tegra-ehci 7d008000.usb: irq 343, io mem 0x7d008000 > [ 8.747246] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 > [ 8.753009] hub 2-0:1.0: USB hub found > [ 8.755139] hub 2-0:1.0: 1 port detected > [ 8.760236] sdhci-tegra 700b0400.sdhci: Got CD GPIO > [ 8.764021] sdhci-tegra 700b0400.sdhci: Got WP GPIO > [ 8.769021] mmc1: Unknown controller version (3). You may > experience problems. > [ 8.776370] sdhci-tegra 700b0400.sdhci: No vmmc regulator found > [ 8.782726] tegra-snd-rt5640 sound: ASoC: CODEC DAI rt5640-aif1 not > registered > [ 8.789521] tegra-snd-rt5640 sound: snd_soc_register_card failed (-517) > [ 8.796977] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration > [ 8.802818] tegra-pcie 1003000.pcie-controller: Failed to get > supply 'avddio-pex': -517 > [ 8.811291] reg-fixed-voltage regulators:regulator@11: Failed to > resolve vin-supply for +1.05V_RUN_AVDD_HDMI_PLL > [ 8.821048] tegra-hdmi 54280000.hdmi: failed to get PLL regulator > [ 8.827691] tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517 > [ 8.833857] tegra-ahci 70027000.sata: Failed to get regulators > [ 8.840805] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 > [ 8.846820] hctosys: unable to open rtc device (rtc0) > [ 8.847331] sdhci-tegra 700b0400.sdhci: Got CD GPIO > [ 8.847369] sdhci-tegra 700b0400.sdhci: Got WP GPIO > [ 8.847471] mmc1: Unknown controller version (3). You may > experience problems. > [ 8.851403] sdhci-tegra 700b0400.sdhci: No vmmc regulator found > [ 8.852328] tegra-snd-rt5640 sound: ASoC: CODEC DAI rt5640-aif1 not > registered > [ 8.852340] tegra-snd-rt5640 sound: snd_soc_register_card failed (-517) > [ 8.854009] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration > [ 8.854062] tegra-pcie 1003000.pcie-controller: Failed to get > supply 'avddio-pex': -517 > [ 8.855019] reg-fixed-voltage regulators:regulator@11: Failed to > resolve vin-supply for +1.05V_RUN_AVDD_HDMI_PLL > [ 8.855030] tegra-hdmi 54280000.hdmi: failed to get PLL regulator > [ 8.856050] tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517 > [ 8.856059] tegra-ahci 70027000.sata: Failed to get regulators > [ 8.951051] +12V_SATA: disabling > [ 8.952391] +5V_SATA: disabling > [ 8.955596] +5V_HDMI_CON: disabling > [ 8.959166] +1.05V_RUN_AVDD_HDMI_PLL: disabling > [ 8.963742] +USB0_VBUS_SW: disabling > [ 8.967400] +3.3V_AVDD_HDMI_ > The last several dom0 log messages are: [ 5.398512] sdhci: Copyright(c) Pierre Ossman 6sdhci-pltfm: SDHCI platform and OF driver helper [ 5.398574] sdhci-pltfm: SDHCI platform and OF driver helper sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 5.399032] sdhci-tegra 700b0400.sdhci: Got CD GPIO sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 5.399109] sdhci-tegra 700b0400.sdhci: Got WP GPIO 3mmc0: Unknown controller version (3). You may experience problems. [ 5.399231] mmc0: Unknown controller version (3). You may experience problems. sdhci-tegra 700b0400.sdhci: No vmmc regulator found [ 5.399443] sdhci-tegra 700b0400.sdhci: No vmmc regulator found 3mmc0: Unknown controller version (3). You may experience problems. [ 5.399731] mmc0: Unknown controller version (3). You may experience problems. sdhci-tegra 700b0600.sdhci: No vmmc regulator found [ 5.399868] sdhci-tegra 700b0600.sdhci: No vmmc regulator found sdhci-tegra 700b0600.sdhci: No vqmmc regulator found [ 5.399931] sdhci-tegra 700b0600.sdhci: No vqmmc regulator found 4mmc0: Invalid maximum block size, assuming 512 bytes [ 5.399993] mmc0: Invalid maximum block size, assuming 512 bytes 6mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 5.446794] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit 6usbcore: registered new interface driver usbhid [ 5.448020] usbcore: registered new interface driver usbhid 6usbhid: USB HID core driver [ 5.448075] usbhid: USB HID core driver 6cfg80211: Calling CRDA to update world regulatory domain [ 6.536872] cfg80211: Calling CRDA to update world regulatory domain tegra-hda 70030000.hda: azx_get_response timeout, switching to polling mode: last cmd=0x300f0001 [ 8.526885] tegra-hda 70030000.hda: azx_get_response timeout, switching to polling mode: last cmd=0x300f0001 6input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input0 [ 8.968688] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input0 6cfg80211: Calling CRDA to update world regulatory domain [ 9.696855] cfg80211: Calling CRDA to update world regulatory domain tegra-i2c 7000c000.i2c: ---- From Dushyant's log, I saw the "tegra-i2c 7000c000.i2c:" will finally time out. However, in my case, I didn't see the time out happens. Thanks and Best Regards, Meng ----------- Meng Xu PhD Student in Computer and Information Science University of Pennsylvania http://www.cis.upenn.edu/~mengxu/ _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |