[Top] [All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH raisin 2/4] config: Separate config urls into a separate file

So that we're not duplicating information.

Signed-off-by: George Dunlap <george.dunlap@xxxxxxxxxx>
---
CC: Stefano Stabellini <sstabellini@xxxxxxxxxx>
---
 configs/config-4.5      | 39 ---------------------------------------
 configs/config-4.6      | 39 ---------------------------------------
 configs/config-master   | 38 --------------------------------------
 configs/config-url-git  |  8 ++++++++
 configs/config-url-http |  7 +++++++
 defconfig               | 35 ++++++++++++++++++++++++++++++++++-
 6 files changed, 49 insertions(+), 117 deletions(-)

diff --git a/configs/config-4.5 b/configs/config-4.5
index e3b92d5..4163b68 100644
--- a/configs/config-4.5
+++ b/configs/config-4.5
@@ -1,37 +1,3 @@
-# Config variables for raisin
-# Setup a Xen 4.5 based system
-
-# Components
-## All components: seabios ovmf xen qemu qemu_traditional grub libvirt linux
-## Core xen functionality: xen
-## Remove a component from the list below, if you want to disable it
-## You can manually overwrite this list using the COMPONENTS
-## environmental variable.
-ENABLED_COMPONENTS="seabios ovmf xen qemu qemu_traditional grub libvirt"
-
-# Build config
-## Make command to run
-MAKE="make -j2"
-## Installation prefix (configure --prefix)
-PREFIX="/usr"
-## Install everything under DESTDIR
-## If you want to install under / run raise.sh -i
-DESTDIR=dist
-
-# Git urls. Use the http urls if you are behind a firewall.
-#XEN_URL="http://xenbits.xen.org/git-http/xen.git";
-#GRUB_URL="http://git.savannah.gnu.org/r/grub.git";
-#LIBVIRT_URL="https://gitorious.org/libvirt/libvirt.git";
-XEN_URL="git://xenbits.xen.org/xen.git"
-QEMU_URL="git://xenbits.xen.org/qemu-upstream-4.5-testing.git"
-QEMU_TRADITIONAL_URL="git://xenbits.xen.org/qemu-xen-4.5-testing.git"
-SEABIOS_URL="git://xenbits.xen.org/seabios.git"
-GRUB_URL="git://git.savannah.gnu.org/grub.git"
-LIBVIRT_URL="git://xenbits.xen.org/libvirt.git"
-OVMF_URL="git://xenbits.xen.org/ovmf.git"
-LINUX_URL="git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
-
-# Software versions.
 XEN_REVISION="origin/stable-4.5"
 QEMU_REVISION="master"
 QEMU_TRADITIONAL_REVISION="master"
@@ -40,8 +6,3 @@ GRUB_REVISION="master"
 LIBVIRT_REVISION="origin/xen-tested-master"
 OVMF_REVISION="cb9a7ebabcd6b8a49dc0854b2f9592d732b5afbd"
 LINUX_REVISION="master"
-
-# Tests
-## All tests: busybox-pv busybox-hvm
-## ENABLED_TESTS is the list of test run by raise test
-ENABLED_TESTS="busybox-pv busybox-hvm"
diff --git a/configs/config-4.6 b/configs/config-4.6
index ebd45e7..e8b2a09 100644
--- a/configs/config-4.6
+++ b/configs/config-4.6
@@ -1,37 +1,3 @@
-# Config variables for raisin
-# Setup a Xen 4.6 based system
-
-# Components
-## All components: seabios ovmf xen qemu qemu_traditional grub libvirt linux
-## Core xen functionality: xen
-## Remove a component from the list below, if you want to disable it
-## You can manually overwrite this list using the COMPONENTS
-## environmental variable.
-ENABLED_COMPONENTS="seabios ovmf xen qemu qemu_traditional grub libvirt"
-
-# Build config
-## Make command to run
-MAKE="make -j2"
-## Installation prefix (configure --prefix)
-PREFIX="/usr"
-## Install everything under DESTDIR
-## If you want to install under / run raise.sh -i
-DESTDIR=dist
-
-# Git urls. Use the http urls if you are behind a firewall.
-#XEN_URL="http://xenbits.xen.org/git-http/xen.git";
-#GRUB_URL="http://git.savannah.gnu.org/r/grub.git";
-#LIBVIRT_URL="https://gitorious.org/libvirt/libvirt.git";
-XEN_URL="git://xenbits.xen.org/xen.git"
-QEMU_URL="git://xenbits.xen.org/qemu-upstream-4.6-testing.git"
-QEMU_TRADITIONAL_URL="git://xenbits.xen.org/qemu-xen-4.6-testing.git"
-SEABIOS_URL="git://xenbits.xen.org/seabios.git"
-GRUB_URL="git://git.savannah.gnu.org/grub.git"
-LIBVIRT_URL="git://xenbits.xen.org/libvirt.git"
-OVMF_URL="git://xenbits.xen.org/ovmf.git"
-LINUX_URL="git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
-
-# Software versions.
 XEN_REVISION="origin/stable-4.6"
 QEMU_REVISION="master"
 QEMU_TRADITIONAL_REVISION="master"
@@ -40,8 +6,3 @@ GRUB_REVISION="master"
 LIBVIRT_REVISION="origin/xen-tested-master"
 OVMF_REVISION="cb9a7ebabcd6b8a49dc0854b2f9592d732b5afbd"
 LINUX_REVISION="master"
-
-# Tests
-## All tests: busybox-pv busybox-hvm
-## ENABLED_TESTS is the list of test run by raise test
-ENABLED_TESTS="busybox-pv busybox-hvm"
diff --git a/configs/config-master b/configs/config-master
index b218708..bd26ce3 100644
--- a/configs/config-master
+++ b/configs/config-master
@@ -1,36 +1,3 @@
-# Config variables for raisin
-
-# Components
-## All components: seabios ovmf xen qemu qemu_traditional grub libvirt linux
-## Core xen functionality: xen
-## Remove a component from the list below, if you want to disable it
-## You can manually overwrite this list using the COMPONENTS
-## environmental variable.
-ENABLED_COMPONENTS="seabios ovmf xen qemu qemu_traditional grub libvirt"
-
-# Build config
-## Make command to run
-MAKE="make -j2"
-## Installation prefix (configure --prefix)
-PREFIX="/usr"
-## Install everything under DESTDIR
-## If you want to install under / run raise.sh -i
-DESTDIR=dist
-
-# Git urls. Use the http urls if you are behind a firewall.
-#XEN_URL="http://xenbits.xen.org/git-http/xen.git";
-#GRUB_URL="http://git.savannah.gnu.org/r/grub.git";
-#LIBVIRT_URL="https://gitorious.org/libvirt/libvirt.git";
-XEN_URL="git://xenbits.xen.org/xen.git"
-QEMU_URL="git://xenbits.xen.org/qemu-upstream-unstable.git"
-QEMU_TRADITIONAL_URL="git://xenbits.xen.org/qemu-xen-unstable.git"
-SEABIOS_URL="git://xenbits.xen.org/osstest/seabios.git"
-GRUB_URL="git://git.savannah.gnu.org/grub.git"
-LIBVIRT_URL="git://xenbits.xen.org/libvirt.git"
-OVMF_URL="git://xenbits.xen.org/osstest/ovmf.git"
-LINUX_URL="git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
-
-# Software versions.
 XEN_REVISION="master"
 QEMU_REVISION="master"
 QEMU_TRADITIONAL_REVISION="master"
@@ -39,8 +6,3 @@ GRUB_REVISION="master"
 LIBVIRT_REVISION="origin/xen-tested-master"
 OVMF_REVISION="origin/xen-tested-master"
 LINUX_REVISION="master"
-
-# Tests
-## All tests: busybox-pv busybox-hvm
-## ENABLED_TESTS is the list of test run by raise test
-ENABLED_TESTS="busybox-pv busybox-hvm"
diff --git a/configs/config-url-git b/configs/config-url-git
new file mode 100644
index 0000000..79813c4
--- /dev/null
+++ b/configs/config-url-git
@@ -0,0 +1,8 @@
+XEN_URL="git://xenbits.xen.org/xen.git"
+QEMU_URL="git://xenbits.xen.org/qemu-xen.git"
+QEMU_TRADITIONAL_URL="git://xenbits.xen.org/qemu-xen-traditional.git"
+SEABIOS_URL="git://xenbits.xen.org/seabios.git"
+GRUB_URL="git://git.savannah.gnu.org/grub.git"
+LIBVIRT_URL="git://xenbits.xen.org/libvirt.git"
+OVMF_URL="git://xenbits.xen.org/ovmf.git"
+LINUX_URL="git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
diff --git a/configs/config-url-http b/configs/config-url-http
new file mode 100644
index 0000000..0ea8484
--- /dev/null
+++ b/configs/config-url-http
@@ -0,0 +1,7 @@
+XEN_URL="http://xenbits.xen.org/git-http/xen.git";
+QEMU_URL="http://xenbits.xen.org/git-http/qemu-xen.git";
+QEMU_TRADITIONAL_URL="http://xenbits.xen.org/git-http/qemu-xen-traditional.git";
+SEABIOS_URL="http://xenbits.xen.org/git-http/seabios.git";
+GRUB_URL="http://git.savannah.gnu.org/r/grub.git";
+LIBVIRT_URL="https://gitorious.org/libvirt/libvirt.git";
+OVMF_URL="http://xenbits.xen.org/git-http/ovmf.git";
diff --git a/defconfig b/defconfig
deleted file mode 120000
index 7ba643e..0000000
--- a/defconfig
+++ /dev/null
@@ -1 +0,0 @@
-configs/config-4.6
\ No newline at end of file
diff --git a/defconfig b/defconfig
new file mode 100644
index 0000000..8e79a43
--- /dev/null
+++ b/defconfig
@@ -0,0 +1,34 @@
+# Config variables for raisin
+# Setup a Xen based system.
+
+# Available options: 4.5, 4.6, master (for development branch)
+XEN_RELEASE="4.6"
+
+# Components
+## All components: seabios ovmf xen qemu qemu_traditional grub libvirt linux
+## Core xen functionality: xen
+## Remove a component from the list below, if you want to disable it
+## You can manually overwrite this list using the COMPONENTS
+## environmental variable.
+ENABLED_COMPONENTS="seabios ovmf xen qemu qemu_traditional grub libvirt"
+
+# Build config
+## Make command to run
+MAKE="make -j2"
+## Installation prefix (configure --prefix)
+PREFIX="/usr"
+## Install everything under DESTDIR
+## If you want to install under / run raise.sh -i
+DESTDIR=dist
+
+# Git transport.  Use "http" if you're behind a firewall
+GIT_TRANSPORT="git"
+. configs/config-url-${GIT_TRANSPORT}
+
+# Software versions.
+. configs/config-${XEN_RELEASE}
+
+# Tests
+## All tests: busybox-pv busybox-hvm
+## ENABLED_TESTS is the list of test run by raise test
+ENABLED_TESTS="busybox-pv busybox-hvm"
-- 
2.1.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 

©2013 Xen Project, A Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation.
Xen Project is a trademark of The Linux Foundation.

Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.