[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v4 3/3] x86/ioreq server: Add HVMOP to map guest ram with p2m_ioreq_server to an ioreq server.



On 20/06/16 10:03, Yu Zhang wrote:
> 
> 
> On 6/17/2016 6:17 PM, George Dunlap wrote:
>> On 16/06/16 10:55, Jan Beulich wrote:
>>>> Previously in the 2nd version, I used p2m_change_entry_type_global() to
>>>> reset the
>>>> outstanding p2m_ioreq_server entries back to p2m_ram_rw
>>>> asynchronously after
>>>> the de-registration. But we realized later that this approach means we
>>>> can not support
>>>> live migration. And to recalculate the whole p2m table forcefully when
>>>> de-registration
>>>> happens means too much cost.
>>>>
>>>> And further discussion with Paul was that we can leave the
>>>> responsibility to reset p2m type
>>>> to the device model side, and even a device model fails to do so, the
>>>> affected one will only
>>>> be the current VM, neither other VM nor hypervisor will get hurt.
>>>>
>>>> I thought we have reached agreement in the review process of version 2,
>>>> so I removed
>>>> this part from version 3.
>>> In which case I would appreciate the commit message to explain
>>> this (in particular I admit I don't recall why live migration would
>>> be affected by the p2m_change_entry_type_global() approach,
>>> but the request is also so that later readers have at least some
>>> source of information other than searching the mailing list).
>> Yes, I don't see why either.  You wouldn't de-register the ioreq server
>> until after the final sweep after the VM has been paused, right?  At
>> which point the lazy p2m re-calculation shouldn't really matter much I
>> don't think.
> 
> Oh, seems I need to give some explanation, and sorry for the late reply.
> 
> IIUC, p2m_change_entry_type_global() only sets the e.emt field to an
> invalid value and turn on
> the e.recal flag; the real p2m reset is done in resolve_misconfig() when
> ept misconfiguration
> happens or when ept_set_entry() is called.
> 
> In the 2nd version patch, we leveraged this approach, by adding
> p2m_ioreq_server into the
> P2M_CHANGEABLE_TYPES, and triggering the p2m_change_entry_type_global()
> when an ioreq
> server is unbounded, hoping that later accesses to these gfns will reset
> the p2m type back to
> p2m_ram_rw. And for the recalculation itself, it works.
> 
> However, there are conflicts if we take live migration  into account,
> i.e. if the live migration is
> triggered by the user(unintentionally maybe) during the gpu emulation
> process, resolve_misconfig()
> will set all the outstanding p2m_ioreq_server entries to p2m_log_dirty,
> which is not what we expected,
> because our intention is to only reset the outdated p2m_ioreq_server
> entries back to p2m_ram_rw.

Well the real problem in the situation you describe is that a second
"lazy" p2m_change_entry_type_global() operation is starting before the
first one is finished.  All that's needed to resolve the situation is
that if you get a second p2m_change_entry_type_global() operation while
there are outstanding entries from the first type change, you have to
finish the first operation (i.e., go "eagerly" find all the
misconfigured entries and change them to the new type) before starting
the second one.


> So one solution is to disallow the log dirty feature in XenGT, i.e. just
> return failure when enable_logdirty()
> is called in toolstack. But I'm afraid this will restrict XenGT's future
> live migration feature.

I don't understand this -- you can return -EBUSY if live migration is
attempted while there are outstanding ioreq_server entries for the time
being, and at some point in the future when this actually works, you can
return success.

 -George

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.