|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Crash in xen 4.7 adding nic during domu startup
Xen 4.5 was fine, but Xen 4.7 is reliably crashing hard. 4.7 rc 5 was crashing most of the time. This is with a HVM FreeBSD domU, with GPU passthrough. Unusual configurations : I am running on a system that does not have SLAT (Core 2 system), and it's on Salix (Slackware). This was fine and stable on 4.3/4.4/4.5 (didn't get around to trying 4.6). Kernel is 4.5.1 libxl: error: libxl_exec.c:118:libxl_report_child_exitstatus: /etc/xen/scripts/1 libxl: error: libxl_create.c:1460:domcreate_attach_vtpms: unable to add nic devs (XEN) [2016-06-27 22:11:41.712] ----[ Xen-4.7.0 x86_64 debug=n Not tainted ]---- (XEN) [2016-06-27 22:11:41.712] CPU: 0 (XEN) [2016-06-27 22:11:41.712] RIP: e008:[<ffff82d080166450>] domain_relinquish_resources+0x10/0x2f0 (XEN) [2016-06-27 22:11:41.712] RFLAGS: 0000000000010296 CONTEXT: hypervisor (d0v0) (XEN) [2016-06-27 22:11:41.712] rax: 0000000000000000 rbx: ffff83020ac4f000 rcx: ffff82d0802346bc (XEN) [2016-06-27 22:11:41.712] rdx: ffff8300bf8d7fff rsi: 0000000000000000 rdi: ffff83020afde050 (XEN) [2016-06-27 22:11:41.712] rbp: ffff8300bf8d7e48 rsp: ffff8300bf8d7d78 r8: 0000000000000001 (XEN) [2016-06-27 22:11:41.712] r9: 0000000000000000 r10: 0000000000000003 r11: ffff83023d94b1d8 (XEN) [2016-06-27 22:11:41.712] r12: 00007ffe21eb9530 r13: 0000000000000000 r14: ffff83020ac4f000 (XEN) [2016-06-27 22:11:41.712] r15: 00007ffe21eb9530 cr0: 0000000080050033 cr4: 00000000000026e0 (XEN) [2016-06-27 22:11:41.712] cr3: 0000000216737000 cr2: 0000000000000000 (XEN) [2016-06-27 22:11:41.712] ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e010 cs: e008 (XEN) [2016-06-27 22:11:41.712] Xen code around <ffff82d080166450> (domain_relinquish_resources+0x10/0x2f0): (XEN) [2016-06-27 22:11:41.712] 18 48 8b bf e8 01 00 00 <00> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (XEN) [2016-06-27 22:11:41.712] Xen stack trace from rsp=ffff8300bf8d7d78: (XEN) [2016-06-27 22:11:41.712] ffff8300bf8d7e48 ffff83020ac4f000 ffff8300bf8d7e48 ffff83020ac4f000 (XEN) [2016-06-27 22:11:41.712] ffff8300bf8d7e48 ffff82d080106704 00007f8c4f919004 ffff8300bf8d7e48 (XEN) [2016-06-27 22:11:41.712] 00007ffe21eb9530 ffff82d080103bf8 ffff830215bb29f8 ffff82d08017c2a2 (XEN) [2016-06-27 22:11:41.712] ffff83023d94b000 0000000100000001 ffff8300bfc97000 ffff83023d94b000 (XEN) [2016-06-27 22:11:41.712] ffff8300bf8d7ec8 ffff82e0042b7640 0000000000000005 0000000000000000 (XEN) [2016-06-27 22:11:41.712] 0000000200000001 ffff830215bb2000 ffff8300bfc97000 0000000000215bb2 (XEN) [2016-06-27 22:11:41.712] 00007ff000000003 0000000000000000 0000000b00000002 00000000024e0001 (XEN) [2016-06-27 22:11:41.712] 00000000024ebf90 00007f8c48000e90 0000000000000001 00007f8c4f706ea7 (XEN) [2016-06-27 22:11:41.712] 00007f8c00000005 0000000000000000 000000000000000c 00007f8c4e424078 (XEN) [2016-06-27 22:11:41.712] 00000000024e2680 0000000000000001 00000000024e4a78 00007f8c4f70dec5 (XEN) [2016-06-27 22:11:41.712] 00000000024ec120 00007f8c4ec25f3d 000000000000000c 0000000000000001 (XEN) [2016-06-27 22:11:41.712] 000000000000e033 ffff8300bfc97000 ffff880022fbfe98 00007ffe21eb9530 (XEN) [2016-06-27 22:11:41.712] ffff8800302a98a8 0000000000305000 00007ffe21eb9530 ffff82d08022cb9b (XEN) [2016-06-27 22:11:41.712] 00007f8c48000e90 00000000024ebf90 00000000024e1560 00000000024e4a78 (XEN) [2016-06-27 22:11:41.712] ffff880022fbfe98 ffff88002b8d6b00 0000000000000282 0000000000000000 (XEN) [2016-06-27 22:11:41.712] 00000000024eb490 0000000000000000 0000000000000024 ffffffff8100148a (XEN) [2016-06-27 22:11:41.712] 0000000000000000 0000000000000000 00007f8c4f919004 0001010000000000 (XEN) [2016-06-27 22:11:41.712] ffffffff8100148a 000000000000e033 0000000000000282 ffff880022fbfe00 (XEN) [2016-06-27 22:11:41.712] 000000000000e02b 0000000000000000 0000000000000000 0000000000000000 (XEN) [2016-06-27 22:11:41.712] 0000000000000000 0000000000000000 ffff8300bfc97000 0000000000000000 (XEN) [2016-06-27 22:11:41.712] Xen call trace: (XEN) [2016-06-27 22:11:41.712] [<ffff82d080166450>] domain_relinquish_resources+0x10/0x2f0 (XEN) [2016-06-27 22:11:41.712] [<ffff82d080106704>] domain_kill+0xc4/0x170 (XEN) [2016-06-27 22:11:41.712] [<ffff82d080103bf8>] do_domctl+0xcf8/0x1a10 (XEN) [2016-06-27 22:11:41.712] [<ffff82d08017c2a2>] do_mmu_update+0x292/0x18c0 (XEN) [2016-06-27 22:11:41.712] [<ffff82d08022cb9b>] lstar_enter+0x9b/0xa0 (XEN) [2016-06-27 22:11:41.712] (XEN) [2016-06-27 22:11:41.712] Pagetable walk from 0000000000000000: (XEN) [2016-06-27 22:11:41.712] L4[0x000] = 000000020eb21067 000000000002ba5f (XEN) [2016-06-27 22:11:41.712] L3[0x000] = 0000000216736067 0000000000023e74 (XEN) [2016-06-27 22:11:41.712] L2[0x000] = 0000000000000000 ffffffffffffffff (XEN) [2016-06-27 22:11:42.130] (XEN) [2016-06-27 22:11:42.133] **************************************** (XEN) [2016-06-27 22:11:42.140] Panic on CPU 0: (XEN) [2016-06-27 22:11:42.145] FATAL PAGE FAULT (XEN) [2016-06-27 22:11:42.150] [error_code=0002] (XEN) [2016-06-27 22:11:42.155] Faulting linear address: 0000000000000000 (XEN) [2016-06-27 22:11:42.162] **************************************** (XEN) [2016-06-27 22:11:42.169] (XEN) [2016-06-27 22:11:42.173] Reboot in five seconds... (XEN) [2016-06-27 22:11:47.181] Resetting with ACPI MEMORY or I/O RESET_REG.þ Have some dmesgs Xen 4.7.0 (XEN) Xen version 4.7.0 (root@xxxxxxxxx) (gcc (GCC) 4.8.2) debug=n Mon Jun 27 21:49:19 BST 2016 (XEN) Latest ChangeSet: (XEN) Bootloader: mbootpack v0.6 (alpha) (XEN) Command line: auto BOOT_IMAGE=Xenl470 ro root=801 iommu=1 verbose dom0_vcpus_pin=1 dom0_max_vcpus=1 dom0_mem=1024M com1=115200,8n1 console=com1 console_timestamps=datems (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 6 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009ec00 (usable) (XEN) 000000000009ec00 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bfbf0000 (usable) (XEN) 00000000bfbf0000 - 00000000bfc96000 (ACPI NVS) (XEN) 00000000bfc96000 - 00000000bfcfa000 (usable) (XEN) 00000000bfcfa000 - 00000000bfd5f000 (reserved) (XEN) 00000000bfd5f000 - 00000000bfd69000 (usable) (XEN) 00000000bfd69000 - 00000000bfddf000 (ACPI NVS) (XEN) 00000000bfddf000 - 00000000bfde5000 (usable) (XEN) 00000000bfde5000 - 00000000bfdff000 (ACPI data) (XEN) 00000000bfdff000 - 00000000bfe00000 (usable) (XEN) 00000000bfe00000 - 00000000bff00000 (reserved) (XEN) 00000000f0000000 - 00000000f4000000 (reserved) (XEN) 00000000fff80000 - 00000000fff8c000 (reserved) (XEN) 0000000100000000 - 0000000240000000 (usable) (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL ) (XEN) ACPI: XSDT BFDFE120, 00AC (r1 INTEL S3200SHC 0 INTL 1000013) (XEN) ACPI: SLIC BFDFC000, 0176 (r1 INTEL S3200SHC 2 INTL 1000013) (XEN) ACPI: FACP BFDFA000, 00F4 (r3 INTEL S3200SHC 0 MSFT 1000013) (XEN) ACPI: DSDT BFDF4000, 56BC (r1 INTEL S3200SHC 0 MSFT 1000013) (XEN) ACPI: FACS BFD69000, 0040 (XEN) ACPI: APIC BFDF3000, 0084 (r1 INTEL S3200SHC 0 MSFT 1000013) (XEN) ACPI: WDDT BFDF2000, 0040 (r1 INTEL S3200SHC 0 MSFT 1000013) (XEN) ACPI: MCFG BFDF1000, 003C (r1 INTEL S3200SHC 0 MSFT 1000013) (XEN) ACPI: HPET BFDF0000, 0038 (r1 INTEL S3200SHC 1 MSFT 1000013) (XEN) ACPI: SPCR BFDEF000, 0050 (r1 INTEL S3200SHC 0 MSFT 1000013) (XEN) ACPI: SSDT BFDEE000, 0175 (r1 INTEL Cpu0Ist 10 MSFT 1000013) (XEN) ACPI: SSDT BFDED000, 0175 (r1 INTEL Cpu1Ist 10 MSFT 1000013) (XEN) ACPI: SSDT BFDEC000, 0175 (r1 INTEL Cpu2Ist 10 MSFT 1000013) (XEN) ACPI: SSDT BFDEB000, 0175 (r1 INTEL Cpu3Ist 10 MSFT 1000013) (XEN) ACPI: SSDT BFDEA000, 01BC (r1 INTEL CpuPm 10 MSFT 1000013) (XEN) ACPI: HEST BFDE9000, 00A8 (r1 INTEL S3200SHC 1 INTL 1) (XEN) ACPI: BERT BFDE8000, 0030 (r1 INTEL S3200SHC 1 INTL 1) (XEN) ACPI: ERST BFDE7000, 0230 (r1 INTEL S3200SHC 1 INTL 1) (XEN) ACPI: EINJ BFDE6000, 0130 (r1 INTEL S3200SHC 1 INTL 1) (XEN) ACPI: DMAR BFDE5000, 0128 (r1 INTEL S3200SHC 1 MSFT 0) (XEN) System RAM: 8188MB (8384524kB) (XEN) Domain heap initialised (XEN) IOAPIC[0]: apic_id 5, version 32, address 0xfec00000, GSI 0-23 (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2660.089 MHz processor. (XEN) Initing memory sharing. (XEN) Intel VT-d iommu 0 supported page sizes: 4kB. (XEN) Intel VT-d Snoop Control not enabled. (XEN) Intel VT-d Dom0 DMA Passthrough not enabled. (XEN) Intel VT-d Queued Invalidation not enabled. (XEN) Intel VT-d Interrupt Remapping not enabled. (XEN) Intel VT-d Posted Interrupt not enabled. (XEN) Intel VT-d Shared EPT tables not enabled. (XEN) I/O virtualisation enabled (XEN) - Dom0 mode: Relaxed (XEN) Interrupt remapping disabled (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) [2016-06-27 22:12:47.383] Platform timer is 14.318MHz HPET (XEN) [2016-06-27 22:12:47.389] Allocated console ring of 16 KiB. (XEN) [2016-06-27 22:12:47.389] VMX: Supported advanced features: (XEN) [2016-06-27 22:12:47.389] - APIC MMIO access virtualisation (XEN) [2016-06-27 22:12:47.389] - APIC TPR shadow (XEN) [2016-06-27 22:12:47.389] - Virtual NMI (XEN) [2016-06-27 22:12:47.389] - MSR direct-access bitmap (XEN) [2016-06-27 22:12:47.389] HVM: ASIDs disabled. (XEN) [2016-06-27 22:12:47.389] HVM: VMX enabled (XEN) [2016-06-27 22:12:47.389] HVM: Hardware Assisted Paging (HAP) not detected (XEN) [2016-06-27 22:12:47.592] Brought up 4 CPUs (XEN) [2016-06-27 22:12:47.594] Dom0 has maximum 216 PIRQs (XEN) [2016-06-27 22:12:47.594] *** LOADING DOMAIN 0 *** (XEN) [2016-06-27 22:12:48.243] Xen kernel: 64-bit, lsb, compat32 (XEN) [2016-06-27 22:12:48.243] Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x218a000 (XEN) [2016-06-27 22:12:48.243] PHYSICAL MEMORY ARRANGEMENT: (XEN) [2016-06-27 22:12:48.243] Dom0 alloc.: 0000000230000000->0000000234000000 (243703 pages to be allocated) (XEN) [2016-06-27 22:12:48.243] Init. ramdisk: 000000023f7f7000->000000023ffffc00 (XEN) [2016-06-27 22:12:48.243] VIRTUAL MEMORY ARRANGEMENT: (XEN) [2016-06-27 22:12:48.243] Loaded kernel: ffffffff81000000->ffffffff8218a000 (XEN) [2016-06-27 22:12:48.243] Init. ramdisk: 0000000000000000->0000000000000000 (XEN) [2016-06-27 22:12:48.243] Phys-Mach map: 0000008000000000->0000008000200000 (XEN) [2016-06-27 22:12:48.243] Start info: ffffffff8218a000->ffffffff8218a4b4 (XEN) [2016-06-27 22:12:48.243] Page tables: ffffffff8218b000->ffffffff821a0000 (XEN) [2016-06-27 22:12:48.243] Boot stack: ffffffff821a0000->ffffffff821a1000 (XEN) [2016-06-27 22:12:48.243] TOTAL: ffffffff80000000->ffffffff82400000 (XEN) [2016-06-27 22:12:48.243] ENTRY ADDRESS: ffffffff81f4e1f0 (XEN) [2016-06-27 22:12:48.244] Dom0 has maximum 1 VCPUs (XEN) [2016-06-27 22:12:48.893] Scrubbing Free RAM on 1 nodes using 4 CPUs (XEN) [2016-06-27 22:12:49.007] ..................done. (XEN) [2016-06-27 22:12:50.479] Initial low memory virq threshold set at 0x4000 pages. (XEN) [2016-06-27 22:12:50.479] Std. Loglevel: Errors and warnings (XEN) [2016-06-27 22:12:50.479] Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) [2016-06-27 22:12:50.479] *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) [2016-06-27 22:12:50.480] Freed 308kB init memory. root@gladstone:/home/peter# [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000000] Linux version 4.5.2-xen (peter@gladstone) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Wed Apr 27 02:12:36 BST 2016 [ 0.000000] Command line: quiet irqpoll vt.default_utf8=1 intel_iommu=1 console=hvc0 earlyprintk=xen xen_pciback.hide=(05:00.0)(05:01.0)(05:02.0)(03:00.0)(03:00.1)(02:00.0)(01:00.0)(01:00.1) md_mod.start_dirty_degraded=1 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] Released 0 page(s) [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] Xen: [mem 0x000000000009ec00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x00000000bfbeffff] usable [ 0.000000] Xen: [mem 0x00000000bfbf0000-0x00000000bfc95fff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bfc96000-0x00000000bfcf9fff] usable [ 0.000000] Xen: [mem 0x00000000bfcfa000-0x00000000bfd5efff] reserved [ 0.000000] Xen: [mem 0x00000000bfd5f000-0x00000000bfd68fff] usable [ 0.000000] Xen: [mem 0x00000000bfd69000-0x00000000bfddefff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bfddf000-0x00000000bfde4fff] usable [ 0.000000] Xen: [mem 0x00000000bfde5000-0x00000000bfdfefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bfdff000-0x00000000bfdfffff] usable [ 0.000000] Xen: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb03000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000fff80000-0x00000000fff8bfff] reserved [ 0.000000] Xen: [mem 0x0000000100000000-0x000000023fffffff] usable [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Intel Corporation S3210SH/S3210SH, BIOS S3200X38.86B.00.00.0052.112920101508 11/29/2010 [ 0.000000] Hypervisor detected: Xen [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR: Disabled [ 0.000000] e820: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] BRK [0x02164000, 0x02164fff] PGTABLE [ 0.000000] BRK [0x02165000, 0x02165fff] PGTABLE [ 0.000000] BRK [0x02166000, 0x02166fff] PGTABLE [ 0.000000] BRK [0x02167000, 0x02167fff] PGTABLE [ 0.000000] BRK [0x02168000, 0x02168fff] PGTABLE [ 0.000000] BRK [0x02169000, 0x02169fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x04000000-0x04808fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F03C0 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000BFDFE120 0000AC (v01 INTEL S3200SHC 00000000 INTL 01000013) [ 0.000000] ACPI: SLIC 0x00000000BFDFC000 000176 (v01 INTEL S3200SHC 00000002 INTL 01000013) [ 0.000000] ACPI: FACP 0x00000000BFDFA000 0000F4 (v03 INTEL S3200SHC 00000000 MSFT 01000013) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20160108/tbfadt-623) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20160108/tbfadt-704) [ 0.000000] ACPI: DSDT 0x00000000BFDF4000 0056BC (v01 INTEL S3200SHC 00000000 MSFT 01000013) [ 0.000000] ACPI: FACS 0x00000000BFD69000 000040 [ 0.000000] ACPI: FACS 0x00000000BFD69000 000040 [ 0.000000] ACPI: APIC 0x00000000BFDF3000 000084 (v01 INTEL S3200SHC 00000000 MSFT 01000013) [ 0.000000] ACPI: WDDT 0x00000000BFDF2000 000040 (v01 INTEL S3200SHC 00000000 MSFT 01000013) [ 0.000000] ACPI: MCFG 0x00000000BFDF1000 00003C (v01 INTEL S3200SHC 00000000 MSFT 01000013) [ 0.000000] ACPI: HPET 0x00000000BFDF0000 000038 (v01 INTEL S3200SHC 00000001 MSFT 01000013) [ 0.000000] ACPI: SPCR 0x00000000BFDEF000 000050 (v01 INTEL S3200SHC 00000000 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000BFDEE000 000175 (v01 INTEL Cpu0Ist 00000010 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000BFDED000 000175 (v01 INTEL Cpu1Ist 00000010 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000BFDEC000 000175 (v01 INTEL Cpu2Ist 00000010 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000BFDEB000 000175 (v01 INTEL Cpu3Ist 00000010 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000BFDEA000 0001BC (v01 INTEL CpuPm 00000010 MSFT 01000013) [ 0.000000] ACPI: HEST 0x00000000BFDE9000 0000A8 (v01 INTEL S3200SHC 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 0x00000000BFDE8000 000030 (v01 INTEL S3200SHC 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 0x00000000BFDE7000 000230 (v01 INTEL S3200SHC 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 0x00000000BFDE6000 000130 (v01 INTEL S3200SHC 00000001 INTL 00000001) [ 0.000000] ACPI: RMAD 0x00000000BFDE5000 000128 (v01 INTEL S3200SHC 00000001 MSFT 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Setting APIC routing to Xen PV. [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfbeffff] [ 0.000000] node 0: [mem 0x00000000bfc96000-0x00000000bfcf9fff] [ 0.000000] node 0: [mem 0x00000000bfd5f000-0x00000000bfd68fff] [ 0.000000] node 0: [mem 0x00000000bfddf000-0x00000000bfde4fff] [ 0.000000] node 0: [mem 0x00000000bfdff000-0x00000000bfdfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff] [ 0.000000] On node 0 totalpages: 2096130 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12210 pages used for memmap [ 0.000000] DMA32 zone: 781413 pages, LIFO batch:31 [ 0.000000] Normal zone: 20480 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31 [ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000 [ 0.000000] Remapped 98 page(s) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 5, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfbf0000-0xbfc95fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfcfa000-0xbfd5efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfd69000-0xbfddefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfde5000-0xbfdfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfe00000-0xbfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeb02fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb03000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfff7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfff80000-0xfff8bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfff8c000-0xffffffff] [ 0.000000] e820: [mem 0xbff00000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.7.0 (preserve-AD) [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff880035c00000 s95256 r8192 d31720 u524288 [ 0.000000] pcpu-alloc: s95256 r8192 d31720 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] xen: PV spinlocks enabled [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063355 [ 0.000000] Kernel command line: quiet irqpoll vt.default_utf8=1 intel_iommu=1 console=hvc0 earlyprintk=xen xen_pciback.hide=(05:00.0)(05:01.0)(05:02.0)(03:00.0)(03:00.1)(02:00.0)(01:00.0)(01:00.1) md_mod.start_dirty_degraded=1 [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] software IO TLB [mem 0x31000000-0x35000000] (64MB) mapped at [ffff880031000000-ffff880034ffffff] [ 0.000000] Memory: 779092K/8384520K available (8388K kernel code, 1232K rwdata, 2696K rodata, 1328K init, 864K bss, 7605428K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1 [ 0.000000] Using NULL legacy PIC [ 0.000000] NR_IRQS:8448 nr_irqs:256 0 [ 0.000000] xen:events: Using FIFO-based ABI [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [hvc0] enabled [ 0.000000] bootconsole [xenboot0] disabled [ 0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] tsc: Detected 2660.088 MHz processor [ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5322.85 BogoMIPS (lpj=8866960) [ 0.003333] pid_max: default: 32768 minimum: 301 [ 0.003333] ACPI: Core revision 20160108 [ 0.016265] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.016268] [ 0.016556] Security Framework initialized [ 0.016572] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.016574] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.016994] CPU: Physical Processor ID: 0 [ 0.016996] CPU: Processor Core ID: 0 [ 0.016999] mce: CPU supports 2 MCE banks [ 0.017016] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.017017] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.051386] Freeing SMP alternatives memory: 32K (ffffffff82082000 - ffffffff8208a000) [ 0.053352] ftrace: allocating 31665 entries in 124 pages [ 0.060102] cpu 0 spinlock event irq 25 [ 0.060110] Could not initialize VPMU for cpu 0, error -95 [ 0.060162] Performance Events: 4-deep LBR, Core2 events, Broken PMU hardware detected, using software events only. [ 0.060178] Failed to access perfctr msr (MSR c2 is 0) [ 0.076720] x86: Booted up 1 node, 1 CPUs [ 0.076802] devtmpfs: initialized [ 0.083378] PM: Registering ACPI NVS region [mem 0xbfbf0000-0xbfc95fff] (679936 bytes) [ 0.083389] PM: Registering ACPI NVS region [mem 0xbfd69000-0xbfddefff] (483328 bytes) [ 0.083454] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.083492] xor: measuring software checksum speed [ 0.116675] prefetch64-sse: 5520.000 MB/sec [ 0.150003] generic_sse: 5173.200 MB/sec [ 0.150004] xor: using function: prefetch64-sse (5520.000 MB/sec) [ 0.150013] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.150015] pinctrl core: initialized pinctrl subsystem [ 0.150198] NET: Registered protocol family 16 [ 0.150209] xen:grant_table: Grant tables using version 1 layout [ 0.150220] Grant table initialized [ 0.150425] ACPI: bus type PCI registered [ 0.150428] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.150572] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.150575] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.158440] PCI: Using configuration type 1 for base access [ 0.240009] raid6: sse2x1 gen() 4443 MB/s [ 0.296672] raid6: sse2x1 xor() 4297 MB/s [ 0.353337] raid6: sse2x2 gen() 4549 MB/s [ 0.410008] raid6: sse2x2 xor() 5144 MB/s [ 0.466673] raid6: sse2x4 gen() 7538 MB/s [ 0.523341] raid6: sse2x4 xor() 5841 MB/s [ 0.523342] raid6: using algorithm sse2x4 gen() 7538 MB/s [ 0.523344] raid6: .... xor() 5841 MB/s, rmw enabled [ 0.523345] raid6: using ssse3x2 recovery algorithm [ 0.523391] ACPI: Added _OSI(Module Device) [ 0.523393] ACPI: Added _OSI(Processor Device) [ 0.523394] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.523396] ACPI: Added _OSI(Processor Aggregator Device) [ 0.523604] xen: registering gsi 9 triggering 0 polarity 0 [ 0.523616] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.526119] ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20160108/dsopcode-236) [ 0.526125] ACPI Error: Method parse/execution failed [\_SB._OSC] (Node ffff880030c8ab18), AE_AML_BUFFER_LIMIT (20160108/psparse-542) [ 0.526371] ACPI: Interpreter enabled [ 0.526387] ACPI: (supports S0 S1 S4 S5) [ 0.526389] ACPI: Using IOAPIC for interrupt routing [ 0.526442] HEST: Table parsing has been initialized. [ 0.526445] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.531357] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.531363] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.531368] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.531372] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.532114] PCI host bridge to bus 0000:00 [ 0.532117] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.532119] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.532122] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.532124] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window] [ 0.532125] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf0000000 window] [ 0.532128] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.532142] pci 0000:00:00.0: [8086:29f0] type 00 class 0x060000 [ 0.532313] pci 0000:00:01.0: [8086:29f1] type 01 class 0x060400 [ 0.532413] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.532465] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.532530] pci 0000:00:06.0: [8086:29f9] type 01 class 0x060400 [ 0.532629] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.532679] pci 0000:00:06.0: System wakeup disabled by ACPI [ 0.532765] pci 0000:00:19.0: [8086:10bd] type 00 class 0x020000 [ 0.532794] pci 0000:00:19.0: reg 0x10: [mem 0xe2300000-0xe231ffff] [ 0.532808] pci 0000:00:19.0: reg 0x14: [mem 0xe2320000-0xe2320fff] [ 0.532823] pci 0000:00:19.0: reg 0x18: [io 0x40e0-0x40ff] [ 0.532936] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.532987] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.533041] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.533118] pci 0000:00:1a.0: reg 0x20: [io 0x40c0-0x40df] [ 0.533245] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.533300] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.533353] pci 0000:00:1a.1: reg 0x20: [io 0x40a0-0x40bf] [ 0.533481] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.533549] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.533579] pci 0000:00:1a.7: reg 0x10: [mem 0xe2321c00-0xe2321fff] [ 0.533729] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.533798] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.533859] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.533987] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.534043] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.534106] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.534234] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.534291] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.534352] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.534429] pci 0000:00:1d.0: reg 0x20: [io 0x4080-0x409f] [ 0.534555] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.534610] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.534686] pci 0000:00:1d.1: reg 0x20: [io 0x4060-0x407f] [ 0.534812] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.534866] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.534943] pci 0000:00:1d.2: reg 0x20: [io 0x4040-0x405f] [ 0.535068] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.535134] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.535165] pci 0000:00:1d.7: reg 0x10: [mem 0xe2321800-0xe2321bff] [ 0.535313] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.535381] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.535435] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.535567] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.535622] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100 [ 0.535750] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415] [ 0.535757] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.535762] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0ca0 (mask 000f) [ 0.535766] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0680 (mask 00ff) [ 0.535770] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0800 (mask 007f) [ 0.535774] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0600 (mask 007f) [ 0.535911] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.535940] pci 0000:00:1f.2: reg 0x10: [io 0x4408-0x440f] [ 0.535954] pci 0000:00:1f.2: reg 0x14: [io 0x4414-0x4417] [ 0.535969] pci 0000:00:1f.2: reg 0x18: [io 0x4400-0x4407] [ 0.535983] pci 0000:00:1f.2: reg 0x1c: [io 0x4410-0x4413] [ 0.535997] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f] [ 0.536011] pci 0000:00:1f.2: reg 0x24: [mem 0xe2321000-0xe23217ff] [ 0.536091] pci 0000:00:1f.2: PME# supported from D3hot [ 0.536189] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.536217] pci 0000:00:1f.3: reg 0x10: [mem 0xe2322000-0xe23220ff 64bit] [ 0.536256] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f] [ 0.536443] pci 0000:01:00.0: [10de:06d8] type 00 class 0x030000 [ 0.536463] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe1ffffff] [ 0.536482] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref] [ 0.536500] pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xdbffffff 64bit pref] [ 0.536512] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f] [ 0.536523] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.536666] pci 0000:01:00.1: [10de:0be5] type 00 class 0x040300 [ 0.536687] pci 0000:01:00.1: reg 0x10: [mem 0xe2000000-0xe2003fff] [ 0.536935] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.536940] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.536945] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe20fffff] [ 0.536953] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref] [ 0.537032] pci 0000:02:00.0: [1b6f:7052] type 00 class 0x0c0330 [ 0.537071] pci 0000:02:00.0: reg 0x10: [mem 0xe2200000-0xe2207fff 64bit] [ 0.537249] pci 0000:02:00.0: supports D1 D2 [ 0.537252] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.537367] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.537375] pci 0000:00:06.0: bridge window [mem 0xe2200000-0xe22fffff] [ 0.537467] pci 0000:03:00.0: [10de:06d8] type 00 class 0x030000 [ 0.537492] pci 0000:03:00.0: reg 0x10: [mem 0xdc000000-0xddffffff] [ 0.537517] pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xc7ffffff 64bit pref] [ 0.537541] pci 0000:03:00.0: reg 0x1c: [mem 0xc8000000-0xcbffffff 64bit pref] [ 0.537557] pci 0000:03:00.0: reg 0x24: [io 0x2000-0x207f] [ 0.537574] pci 0000:03:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.537747] pci 0000:03:00.1: [10de:0be5] type 00 class 0x040300 [ 0.537772] pci 0000:03:00.1: reg 0x10: [mem 0xde000000-0xde003fff] [ 0.543363] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.543369] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.543375] pci 0000:00:1c.0: bridge window [mem 0xdc000000-0xde0fffff] [ 0.543384] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xcbffffff 64bit pref] [ 0.543453] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.543521] pci 0000:05:00.0: [1102:0008] type 00 class 0x040100 [ 0.543548] pci 0000:05:00.0: reg 0x10: [io 0x1040-0x107f] [ 0.543681] pci 0000:05:00.0: supports D1 D2 [ 0.543739] pci 0000:05:01.0: [104c:8025] type 00 class 0x0c0010 [ 0.543767] pci 0000:05:01.0: reg 0x10: [mem 0xe2144000-0xe21447ff] [ 0.543783] pci 0000:05:01.0: reg 0x14: [mem 0xe2140000-0xe2143fff] [ 0.543903] pci 0000:05:01.0: supports D1 D2 [ 0.543906] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot [ 0.543974] pci 0000:05:02.0: [8086:1076] type 00 class 0x020000 [ 0.544005] pci 0000:05:02.0: reg 0x10: [mem 0xe2120000-0xe213ffff] [ 0.544022] pci 0000:05:02.0: reg 0x14: [mem 0xe2100000-0xe211ffff] [ 0.544038] pci 0000:05:02.0: reg 0x18: [io 0x1000-0x103f] [ 0.544097] pci 0000:05:02.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.544157] pci 0000:05:02.0: PME# supported from D0 D3hot D3cold [ 0.544271] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.544277] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.544283] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe21fffff] [ 0.544292] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.544294] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.544296] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.544298] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode) [ 0.544300] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xf0000000 window] (subtractive decode) [ 0.544343] pci_bus 0000:00: on NUMA node 0 [ 0.544431] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.544519] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) [ 0.544604] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) [ 0.544687] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.544774] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12) [ 0.544858] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12) [ 0.544940] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) [ 0.545023] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.545075] xen: registering gsi 13 triggering 1 polarity 0 [ 0.545084] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.545603] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.545642] xen:balloon: Initialising balloon driver [ 0.660051] xen_balloon: Initialising balloon driver [ 0.660184] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.660191] vgaarb: setting as boot device: PCI:0000:03:00.0 [ 0.660193] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.660196] vgaarb: loaded [ 0.660198] vgaarb: bridge control possible 0000:03:00.0 [ 0.660200] vgaarb: bridge control possible 0000:01:00.0 [ 0.660284] SCSI subsystem initialized [ 0.663350] libata version 3.00 loaded. [ 0.663358] ACPI: bus type USB registered [ 0.663385] usbcore: registered new interface driver usbfs [ 0.663398] usbcore: registered new interface driver hub [ 0.663407] usbcore: registered new device driver usb [ 0.670020] PCI: Using ACPI for IRQ routing [ 0.673008] PCI: pci_cache_line_size set to 64 bytes [ 0.673124] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.673126] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.673128] e820: reserve RAM buffer [mem 0xbfbf0000-0xbfffffff] [ 0.673130] e820: reserve RAM buffer [mem 0xbfcfa000-0xbfffffff] [ 0.673132] e820: reserve RAM buffer [mem 0xbfd69000-0xbfffffff] [ 0.673134] e820: reserve RAM buffer [mem 0xbfde5000-0xbfffffff] [ 0.673135] e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff] [ 0.673333] clocksource: Switched to clocksource xen [ 0.678990] VFS: Disk quotas dquot_6.6.0 [ 0.679015] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.679097] FS-Cache: Loaded [ 0.679151] pnp: PnP ACPI init [ 0.679310] system 00:00: [mem 0xf0000000-0xf3ffffff] could not be reserved [ 0.679313] system 00:00: [mem 0xfeb00000-0xfeb03fff] could not be reserved [ 0.679316] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.679318] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.679320] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.679322] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.679325] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.679327] system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved [ 0.679329] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved [ 0.679332] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.679334] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved [ 0.679339] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.679495] xen: registering gsi 8 triggering 1 polarity 0 [ 0.679514] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.679539] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.679597] system 00:02: [io 0x0500-0x053f] has been reserved [ 0.679600] system 00:02: [io 0x0400-0x047f] could not be reserved [ 0.679602] system 00:02: [io 0x0ca0-0x0caf] has been reserved [ 0.679604] system 00:02: [io 0x0680-0x06ff] has been reserved [ 0.679606] system 00:02: [io 0x0800-0x087f] has been reserved [ 0.679609] system 00:02: [io 0x0600-0x061f] has been reserved [ 0.679612] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.679855] xen: registering gsi 4 triggering 1 polarity 0 [ 0.679863] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.679865] Already setup the GSI :4 [ 0.679868] pnp 00:03: [dma 0 disabled] [ 0.679922] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.680043] xen: registering gsi 12 triggering 1 polarity 0 [ 0.680049] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.680079] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.680095] xen: registering gsi 1 triggering 1 polarity 0 [ 0.680101] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.680130] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.680371] xen: registering gsi 6 triggering 1 polarity 0 [ 0.680377] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.680384] pnp 00:06: [dma 2] [ 0.680426] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.680499] pnp: PnP ACPI: found 7 devices [ 0.680591] pciback 0000:01:00.0: seizing device [ 0.680597] pciback 0000:01:00.1: seizing device [ 0.680604] pciback 0000:02:00.0: seizing device [ 0.680610] pciback 0000:03:00.0: seizing device [ 0.680615] pciback 0000:03:00.1: seizing device [ 0.680621] pciback 0000:05:00.0: seizing device [ 0.680629] pciback 0000:05:01.0: seizing device [ 0.680635] pciback 0000:05:02.0: seizing device [ 0.687017] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.687024] pciback 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.687027] pciback 0000:03:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.687030] pciback 0000:05:02.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 0.687076] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.687079] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.687082] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 [ 0.687098] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment [ 0.687101] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.687104] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.687106] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.687109] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.687111] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.687113] pci 0000:00:1c.4: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.687118] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 0.687123] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.687126] pci 0000:00:1c.4: BAR 13: assigned [io 0x5000-0x5fff] [ 0.687129] pciback 0000:01:00.0: BAR 6: assigned [mem 0xe2080000-0xe20fffff pref] [ 0.687132] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.687136] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.687142] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe20fffff] [ 0.687147] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdbffffff 64bit pref] [ 0.687155] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.687161] pci 0000:00:06.0: bridge window [mem 0xe2200000-0xe22fffff] [ 0.687173] pciback 0000:03:00.0: BAR 6: assigned [mem 0xde080000-0xde0fffff pref] [ 0.687175] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.687178] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.687186] pci 0000:00:1c.0: bridge window [mem 0xdc000000-0xde0fffff] [ 0.687191] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xcbffffff 64bit pref] [ 0.687200] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.687204] pci 0000:00:1c.4: bridge window [io 0x5000-0x5fff] [ 0.687211] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf81fffff] [ 0.687216] pci 0000:00:1c.4: bridge window [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.687227] pciback 0000:05:02.0: BAR 6: assigned [mem 0xe2160000-0xe217ffff pref] [ 0.687229] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.687233] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.687240] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe21fffff] [ 0.687253] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.687255] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.687257] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.687259] pci_bus 0000:00: resource 7 [mem 0xf8000000-0xfebfffff window] [ 0.687261] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xf0000000 window] [ 0.687263] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.687265] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe20fffff] [ 0.687267] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref] [ 0.687269] pci_bus 0000:02: resource 1 [mem 0xe2200000-0xe22fffff] [ 0.687271] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.687273] pci_bus 0000:03: resource 1 [mem 0xdc000000-0xde0fffff] [ 0.687275] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xcbffffff 64bit pref] [ 0.687277] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff] [ 0.687279] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf81fffff] [ 0.687281] pci_bus 0000:04: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.687283] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff] [ 0.687285] pci_bus 0000:05: resource 1 [mem 0xe2100000-0xe21fffff] [ 0.687287] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.687289] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.687291] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.687293] pci_bus 0000:05: resource 7 [mem 0xf8000000-0xfebfffff window] [ 0.687295] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xf0000000 window] [ 0.687322] NET: Registered protocol family 2 [ 0.687505] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.687678] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.687981] TCP: Hash tables configured (established 65536 bind 65536) [ 0.688022] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.688063] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.688168] NET: Registered protocol family 1 [ 0.691635] RPC: Registered named UNIX socket transport module. [ 0.691637] RPC: Registered udp transport module. [ 0.691639] RPC: Registered tcp transport module. [ 0.691640] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.691820] xen: registering gsi 18 triggering 0 polarity 1 [ 0.691835] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.692101] xen: registering gsi 21 triggering 0 polarity 1 [ 0.692107] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.692363] xen: registering gsi 17 triggering 0 polarity 1 [ 0.692369] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.692759] xen: registering gsi 23 triggering 0 polarity 1 [ 0.692765] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.693020] xen: registering gsi 19 triggering 0 polarity 1 [ 0.693027] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.693282] xen: registering gsi 18 triggering 0 polarity 1 [ 0.693285] Already setup the GSI :18 [ 0.693550] xen: registering gsi 23 triggering 0 polarity 1 [ 0.693553] Already setup the GSI :23 [ 0.693954] xen: registering gsi 16 triggering 0 polarity 1 [ 0.693963] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.694007] xen: registering gsi 16 triggering 0 polarity 1 [ 0.694009] Already setup the GSI :16 [ 0.694105] pciback 0000:03:00.0: Video device with shadowed ROM [ 0.694131] PCI: CLS 64 bytes, default 64 [ 0.694199] Trying to unpack rootfs image as initramfs... [ 0.707746] Freeing initrd memory: 8228K (ffff880004000000 - ffff880004809000) [ 0.708693] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.708727] audit: initializing netlink subsys (disabled) [ 0.708745] audit: type=2000 audit(1467065571.856:1): initialized [ 0.717928] NFS: Registering the id_resolver key type [ 0.717939] Key type id_resolver registered [ 0.717941] Key type id_legacy registered [ 0.717946] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 0.721418] FS-Cache: Netfs 'cifs' registered for caching [ 0.721477] Key type cifs.spnego registered [ 0.721485] Key type cifs.idmap registered [ 0.721489] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.721540] SGI XFS with ACLs, security attributes, no debug enabled [ 0.729916] async_tx: api initialized (async) [ 0.729957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.733359] io scheduler noop registered [ 0.733363] io scheduler deadline registered [ 0.733373] io scheduler cfq registered (default) [ 0.733603] xen: registering gsi 16 triggering 0 polarity 1 [ 0.733608] Already setup the GSI :16 [ 0.733943] xen: registering gsi 17 triggering 0 polarity 1 [ 0.733945] Already setup the GSI :17 [ 0.734179] xen: registering gsi 17 triggering 0 polarity 1 [ 0.734181] Already setup the GSI :17 [ 0.734322] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.734330] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.734349] intel_idle: does not run on family 6 model 15 [ 0.734444] ERST: Error Record Serialization Table (ERST) support is initialized. [ 0.734449] pstore: Registered erst as persistent store backend [ 0.737135] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 0.737287] xen:xen_evtchn: Event-channel device installed [ 0.737542] xen: registering gsi 18 triggering 0 polarity 1 [ 0.737547] Already setup the GSI :18 [ 0.763573] xen: registering gsi 17 triggering 0 polarity 1 [ 0.763576] Already setup the GSI :17 [ 0.790203] xen: registering gsi 16 triggering 0 polarity 1 [ 0.790205] Already setup the GSI :16 [ 0.816859] xen: registering gsi 17 triggering 0 polarity 1 [ 0.816861] Already setup the GSI :17 [ 0.817084] xen: registering gsi 16 triggering 0 polarity 1 [ 0.817086] Already setup the GSI :16 [ 0.817345] xen: registering gsi 16 triggering 0 polarity 1 [ 0.817347] Already setup the GSI :16 [ 0.920197] xen: registering gsi 17 triggering 0 polarity 1 [ 0.920200] Already setup the GSI :17 [ 0.920377] pciback 0000:01:00.0: enabling device (0000 -> 0003) [ 0.920413] xen: registering gsi 16 triggering 0 polarity 1 [ 0.920415] Already setup the GSI :16 [ 0.923964] xen_pciback: backend is vpci [ 0.925470] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.925890] hpet_acpi_add: no address or irqs in _CRS [ 0.956932] Floppy drive(s): fd0 is 1.44M [ 0.974979] FDC 0 is a National Semiconductor PC87306 [ 0.982574] brd: module loaded [ 1.010508] loop: module loaded [ 1.010527] Invalid max_queues (4), will use default max: 1. [ 1.010650] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000045F (\_SB.PCI0.PEX5.PCEW) (20160108/utaddress-255) [ 1.010656] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000045F (\_SB.PCI0.PEX4.PCEW) (20160108/utaddress-255) [ 1.010661] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000045F (\_SB.PCI0.PEX3.PCEW) (20160108/utaddress-255) [ 1.010665] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000045F (\_SB.PCI0.PEX2.PCEW) (20160108/utaddress-255) [ 1.010668] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000045F (\_SB.PCI0.PEX1.PCEW) (20160108/utaddress-255) [ 1.010672] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000045F (\_SB.PCI0.PEX0.PCEW) (20160108/utaddress-255) [ 1.010676] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.010681] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000052F (\_SI.SIOR) (20160108/utaddress-255) [ 1.010684] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.010711] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.010806] ahci 0000:00:1f.2: version 3.0 [ 1.010944] xen: registering gsi 21 triggering 0 polarity 1 [ 1.010948] Already setup the GSI :21 [ 1.011091] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.011095] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems [ 1.047199] scsi host0: ahci [ 1.050628] scsi host1: ahci [ 1.054047] scsi host2: ahci [ 1.057466] scsi host3: ahci [ 1.060885] scsi host4: ahci [ 1.064304] scsi host5: ahci [ 1.064348] ata1: SATA max UDMA/133 abar m2048@0xe2321000 port 0xe2321100 irq 39 [ 1.064350] ata2: SATA max UDMA/133 abar m2048@0xe2321000 port 0xe2321180 irq 39 [ 1.064353] ata3: SATA max UDMA/133 abar m2048@0xe2321000 port 0xe2321200 irq 39 [ 1.064355] ata4: SATA max UDMA/133 abar m2048@0xe2321000 port 0xe2321280 irq 39 [ 1.064357] ata5: SATA max UDMA/133 abar m2048@0xe2321000 port 0xe2321300 irq 39 [ 1.064359] ata6: SATA max UDMA/133 abar m2048@0xe2321000 port 0xe2321380 irq 39 [ 1.065229] xen_netfront: Initialising Xen virtual ethernet driver [ 1.065384] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.068611] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.068647] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.068749] mousedev: PS/2 mouse device common for all mice [ 1.068804] rtc_cmos 00:01: RTC can wake from S4 [ 1.068942] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.068977] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram [ 1.068987] xen_wdt: Xen WatchDog Timer Driver v0.01 [ 1.069034] xen_wdt: initialized (timeout=60s, nowayout=0) [ 1.069039] md: linear personality registered for level -1 [ 1.069042] md: raid0 personality registered for level 0 [ 1.069045] md: raid1 personality registered for level 1 [ 1.069047] md: raid10 personality registered for level 10 [ 1.072431] md: raid6 personality registered for level 6 [ 1.072433] md: raid5 personality registered for level 5 [ 1.072435] md: raid4 personality registered for level 4 [ 1.072438] md: multipath personality registered for level -4 [ 1.075882] device-mapper: uevent: version 1.0.3 [ 1.075941] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@xxxxxxxxxx [ 1.076020] Initializing XFRM netlink socket [ 1.076027] NET: Registered protocol family 17 [ 1.076056] Key type dns_resolver registered [ 1.076109] mce: Unable to init device /dev/mcelog (rc: -16) [ 1.076308] registered taskstats version 1 [ 1.373067] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.373085] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.373571] ata2.00: ATA-9: WDC WD10EFRX-68PJCN0, 82.00A82, max UDMA/133 [ 1.373573] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.373877] ata1.00: READ LOG DMA EXT failed, trying unqueued [ 1.373903] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.373905] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM04B0Q, max UDMA/133 [ 1.373907] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.374110] ata2.00: configured for UDMA/133 [ 1.374225] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.374287] ata1.00: configured for UDMA/133 [ 1.377752] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 4B0Q PQ: 0 ANSI: 5 [ 1.379704] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.381290] ata3.00: supports DRM functions and may not be fully accessible [ 1.381423] ata3.00: READ LOG DMA EXT failed, trying unqueued [ 1.381465] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.381467] ata3.00: ATA-9: Samsung SSD 850 EVO 120GB, EMT01B6Q, max UDMA/133 [ 1.381469] ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.381855] ata3.00: supports DRM functions and may not be fully accessible [ 1.381930] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1 [ 1.382029] ata3.00: configured for UDMA/133 [ 1.383094] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.383587] ata4.00: ATA-9: WDC WD10EFRX-68PJCN0, 82.00A82, max UDMA/133 [ 1.383589] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.384127] ata4.00: configured for UDMA/133 [ 1.386401] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.386888] ata5.00: ATA-9: WDC WD10EFRX-68PJCN0, 82.00A82, max UDMA/133 [ 1.386890] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.387404] ata5.00: configured for UDMA/133 [ 1.389729] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.390215] ata6.00: ATA-9: WDC WD10EFRX-68PJCN0, 82.00A82, max UDMA/133 [ 1.390217] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.390727] ata6.00: configured for UDMA/133 [ 1.396860] ata1.00: Enabling discard_zeroes_data [ 1.396873] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 1.396939] sd 0:0:0:0: [sda] Write Protect is off [ 1.396941] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.396963] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.397044] ata1.00: Enabling discard_zeroes_data [ 1.398610] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 > [ 1.399145] ata1.00: Enabling discard_zeroes_data [ 1.399240] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.400612] scsi 1:0:0:0: Direct-Access ATA WDC WD10EFRX-68P 0A82 PQ: 0 ANSI: 5 [ 1.416890] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.416893] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.416939] sd 1:0:0:0: [sdb] Write Protect is off [ 1.416942] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.416963] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.420524] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5 [ 1.421334] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.440161] sd 2:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 1.440259] sd 2:0:0:0: [sdc] Write Protect is off [ 1.440263] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.440284] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.440772] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.443854] scsi 3:0:0:0: Direct-Access ATA WDC WD10EFRX-68P 0A82 PQ: 0 ANSI: 5 [ 1.463493] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.463496] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 1.463576] sd 3:0:0:0: [sdd] Write Protect is off [ 1.463579] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.463600] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.467160] scsi 4:0:0:0: Direct-Access ATA WDC WD10EFRX-68P 0A82 PQ: 0 ANSI: 5 [ 1.474950] sd 3:0:0:0: [sdd] Attached SCSI disk [ 1.486829] sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.486831] sd 4:0:0:0: [sde] 4096-byte physical blocks [ 1.486910] sd 4:0:0:0: [sde] Write Protect is off [ 1.486913] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.486934] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.490495] scsi 5:0:0:0: Direct-Access ATA WDC WD10EFRX-68P 0A82 PQ: 0 ANSI: 5 [ 1.491787] sd 4:0:0:0: [sde] Attached SCSI disk [ 1.510165] sd 5:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.510168] sd 5:0:0:0: [sdf] 4096-byte physical blocks [ 1.510229] sd 5:0:0:0: [sdf] Write Protect is off [ 1.510232] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1.510254] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.518483] sd 5:0:0:0: [sdf] Attached SCSI disk [ 1.519194] Freeing unused kernel memory: 1328K (ffffffff81f36000 - ffffffff82082000) [ 1.519197] Write protecting the kernel read-only data: 14336k [ 1.524176] Freeing unused kernel memory: 1840K (ffff880001834000 - ffff880001a00000) [ 1.525050] Freeing unused kernel memory: 1400K (ffff880001ca2000 - ffff880001e00000) [ 1.550341] udevd[182]: starting version 182 [ 1.710058] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2657f74608f, max_idle_ns: 440795294095 ns [ 2.710063] clocksource: Switched to clocksource tsc [ 2.876081] udevd[300]: starting version 182 [ 3.039926] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 3.039933] ACPI: Sleep Button [SLPB] [ 3.039980] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 3.039983] ACPI: Power Button [PWRB] [ 3.040073] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 3.040075] ACPI: Power Button [PWRF] [ 3.040270] Warning: Processor Platform Limit not supported. [ 3.065952] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.066484] ehci-pci: EHCI PCI platform driver [ 3.066655] xen: registering gsi 17 triggering 0 polarity 1 [ 3.066659] Already setup the GSI :17 [ 3.066724] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 3.066959] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 3.066977] ehci-pci 0000:00:1a.7: debug port 1 [ 3.067332] uhci_hcd: USB Universal Host Controller Interface driver [ 3.070146] pps_core: LinuxPPS API ver. 1 registered [ 3.070148] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 3.070850] PTP clock support registered [ 3.071588] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 3.071617] ehci-pci 0000:00:1a.7: irq 17, io mem 0xe2321c00 [ 3.075641] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.075644] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.077850] gpio_ich: GPIO from 451 to 511 on gpio_ich [ 3.080178] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.080225] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.080227] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.080230] usb usb1: Product: EHCI Host Controller [ 3.080232] usb usb1: Manufacturer: Linux 4.5.2-xen ehci_hcd [ 3.080233] usb usb1: SerialNumber: 0000:00:1a.7 [ 3.080352] hub 1-0:1.0: USB hub found [ 3.080361] hub 1-0:1.0: 6 ports detected [ 3.080678] xen: registering gsi 18 triggering 0 polarity 1 [ 3.080683] Already setup the GSI :18 [ 3.080703] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.080747] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 3.080804] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000040c0 [ 3.080890] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.080893] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.080895] usb usb2: Product: UHCI Host Controller [ 3.080897] usb usb2: Manufacturer: Linux 4.5.2-xen uhci_hcd [ 3.080898] usb usb2: SerialNumber: 0000:00:1a.0 [ 3.081000] hub 2-0:1.0: USB hub found [ 3.081010] hub 2-0:1.0: 2 ports detected [ 3.081225] xen: registering gsi 21 triggering 0 polarity 1 [ 3.081228] Already setup the GSI :21 [ 3.081246] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.081289] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 3.081332] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040a0 [ 3.081409] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.081412] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.081414] usb usb3: Product: UHCI Host Controller [ 3.081416] usb usb3: Manufacturer: Linux 4.5.2-xen uhci_hcd [ 3.081418] usb usb3: SerialNumber: 0000:00:1a.1 [ 3.081519] hub 3-0:1.0: USB hub found [ 3.081529] hub 3-0:1.0: 2 ports detected [ 3.081742] xen: registering gsi 23 triggering 0 polarity 1 [ 3.081744] Already setup the GSI :23 [ 3.081760] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.081800] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 3.081841] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 [ 3.081917] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.081919] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.081921] usb usb4: Product: UHCI Host Controller [ 3.081923] usb usb4: Manufacturer: Linux 4.5.2-xen uhci_hcd [ 3.081925] usb usb4: SerialNumber: 0000:00:1d.0 [ 3.082027] hub 4-0:1.0: USB hub found [ 3.082036] hub 4-0:1.0: 2 ports detected [ 3.082259] xen: registering gsi 19 triggering 0 polarity 1 [ 3.082261] Already setup the GSI :19 [ 3.082277] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.082316] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 3.082358] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 [ 3.082432] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.082435] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.082437] usb usb5: Product: UHCI Host Controller [ 3.082438] usb usb5: Manufacturer: Linux 4.5.2-xen uhci_hcd [ 3.082440] usb usb5: SerialNumber: 0000:00:1d.1 [ 3.082553] hub 5-0:1.0: USB hub found [ 3.082562] hub 5-0:1.0: 2 ports detected [ 3.082789] xen: registering gsi 18 triggering 0 polarity 1 [ 3.082791] Already setup the GSI :18 [ 3.082807] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.082849] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 3.082879] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 [ 3.082956] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.082959] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.082961] usb usb6: Product: UHCI Host Controller [ 3.082962] usb usb6: Manufacturer: Linux 4.5.2-xen uhci_hcd [ 3.082964] usb usb6: SerialNumber: 0000:00:1d.2 [ 3.083063] hub 6-0:1.0: USB hub found [ 3.083072] hub 6-0:1.0: 2 ports detected [ 3.083818] xen: registering gsi 20 triggering 0 polarity 1 [ 3.083833] xen: --> pirq=20 -> irq=20 (gsi=20) [ 3.083944] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.114590] random: nonblocking pool is initialized [ 3.343370] md: bind<sda12> [ 3.370295] md/raid10:md127: active with 1 out of 2 devices [ 3.370323] md127: detected capacity change from 0 to 119963385856 [ 3.371347] md: bind<sdb> [ 3.375727] md: bind<sdd> [ 3.378534] md: bind<sde> [ 3.381746] md: bind<sdf> [ 3.405760] md/raid10:md126: not clean -- starting background reconstruction [ 3.405763] md/raid10:md126: active with 4 out of 4 devices [ 3.405791] md126: detected capacity change from 0 to 2000139845632 [ 3.410877] md: resync of RAID array md126 [ 3.410880] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 3.410882] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 3.410884] md: using 128k window, over a total of 1953261568k. [ 3.468712] bcache: register_bcache() error opening /dev/md127: device busy [ 3.491445] bcache: register_bcache() error opening /dev/md127: device busy [ 3.566964] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:15:17:27:9a:85 [ 3.566969] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.566989] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 6, PBA No: 0070FF-0FF [ 3.567573] xen: registering gsi 23 triggering 0 polarity 1 [ 3.567578] Already setup the GSI :23 [ 3.568149] e1000e 0000:00:19.0 eth1: renamed from eth0 [ 3.590078] usb 5-2: new low-speed USB device number 2 using uhci_hcd [ 3.768405] usb 5-2: New USB device found, idVendor=0557, idProduct=2221 [ 3.768409] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.768412] usb 5-2: Product: UC-10KM V1.3.124 [ 3.768414] usb 5-2: Manufacturer: ATEN [ 3.768416] usb 5-2: SerialNumber: USB Composite device [ 3.794980] usb 5-2: USB disconnect, device number 2 [ 3.800115] hidraw: raw HID events driver (C) Jiri Kosina [ 3.802802] usbcore: registered new interface driver usbhid [ 3.802806] usbhid: USB HID core driver [ 3.820411] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 3.820481] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 3.820502] ehci-pci 0000:00:1d.7: debug port 1 [ 3.824419] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 3.824428] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe2321800 [ 3.833375] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.833505] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.833508] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.833511] usb usb7: Product: EHCI Host Controller [ 3.833513] usb usb7: Manufacturer: Linux 4.5.2-xen ehci_hcd [ 3.833515] usb usb7: SerialNumber: 0000:00:1d.7 [ 3.833788] hub 7-0:1.0: USB hub found [ 3.833828] hub 7-0:1.0: 6 ports detected [ 3.856805] hub 4-0:1.0: USB hub found [ 3.857261] hub 4-0:1.0: 2 ports detected [ 3.880176] hub 5-0:1.0: USB hub found [ 3.880616] hub 5-0:1.0: 2 ports detected [ 3.903469] hub 6-0:1.0: USB hub found [ 3.903910] hub 6-0:1.0: 2 ports detected [ 3.904278] xen: registering gsi 18 triggering 0 polarity 1 [ 3.904283] Already setup the GSI :18 [ 3.904315] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.910613] i2c /dev entries driver [ 4.140024] usb 7-3: new high-speed USB device number 2 using ehci-pci [ 4.267588] usb 7-3: New USB device found, idVendor=040d, idProduct=6205 [ 4.267593] usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.267595] usb 7-3: Product: USB 2.0 Card Reader [ 4.267597] usb 7-3: Manufacturer: VIA Technologies Inc. [ 4.267599] usb 7-3: SerialNumber: FA4X00001173 [ 4.271383] usb-storage 7-3:1.0: USB Mass Storage device detected [ 4.276475] usb-storage 7-3:1.0: Quirks match for vid 040d pid 6205: 20 [ 4.276511] scsi host6: usb-storage 7-3:1.0 [ 4.276613] usbcore: registered new interface driver usb-storage [ 4.394866] bcache: register_bdev() registered backing device md126 [ 4.408043] bcache: register_bcache() error opening /dev/md126: device already registered [ 4.419847] Adding 4000148k swap on /dev/sda5. Priority:-1 extents:1 across:4000148k SS [ 4.432230] fuse init (API version 7.24) [ 4.500038] usb 5-2: new low-speed USB device number 3 using uhci_hcd [ 4.682029] usb 5-2: New USB device found, idVendor=0557, idProduct=2221 [ 4.682032] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.682035] usb 5-2: Product: UC-10KM V1.3.124 [ 4.682037] usb 5-2: Manufacturer: ATEN [ 4.682038] usb 5-2: SerialNumber: USB Composite device [ 4.758418] input: ATEN UC-10KM V1.3.124 as /devices/pci0000:00/0000:00:1d.1/usb5/5-2/5-2:1.0/0003:0557:2221.0001/input/input6 [ 4.810355] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.10 Keyboard [ATEN UC-10KM V1.3.124] on usb-0000:00:1d.1-2/input0 [ 4.810606] input: ATEN UC-10KM V1.3.124 as /devices/pci0000:00/0000:00:1d.1/usb5/5-2/5-2:1.1/0003:0557:2221.0002/input/input7 [ 4.810781] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.10 Mouse [ATEN UC-10KM V1.3.124] on usb-0000:00:1d.1-2/input1 [ 5.282700] scsi 6:0:0:0: Direct-Access VIA-P VT6205-DevB 2.82 PQ: 0 ANSI: 2 [ 5.286071] sd 6:0:0:0: [sdg] Attached SCSI removable disk [ 5.289859] scsi 6:0:0:1: Direct-Access VIA-P VT6205-DevM 2.82 PQ: 0 ANSI: 2 [ 5.294636] sd 6:0:0:1: [sdh] Attached SCSI removable disk [ 6.634160] Linux agpgart interface v0.103 [ 9.722893] XFS (sda6): Mounting V4 Filesystem [ 9.750234] XFS (sda6): Starting recovery (logdev: internal) [ 9.757330] XFS (sda6): Ending recovery (logdev: internal) [ 9.783110] XFS (sda7): Mounting V4 Filesystem [ 9.890269] XFS (sda7): Starting recovery (logdev: internal) [ 9.894686] XFS (sda7): Ending recovery (logdev: internal) [ 9.923072] XFS (sda8): Mounting V4 Filesystem [ 10.022645] XFS (sda8): Starting recovery (logdev: internal) [ 10.028477] XFS (sda8): Ending recovery (logdev: internal) [ 10.060607] XFS (sda9): Mounting V4 Filesystem [ 10.161272] XFS (sda9): Starting recovery (logdev: internal) [ 10.164504] XFS (sda9): Ending recovery (logdev: internal) [ 11.029980] bcache: bch_journal_replay() journal replay done, 10 keys in 8 entries, seq 4070 [ 11.069108] bcache: bch_cached_dev_attach() Caching md126 as bcache0 on set 95282275-0d41-4e0c-8392-91f78d6b5dd8 [ 11.069186] bcache: register_cache() registered cache device md127 [ 11.069403] bcache: register_bcache() error opening /dev/md126: device already registered [ 11.176473] NET: Registered protocol family 10 [ 11.185658] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 11.670283] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 11.670319] device eth1 entered promiscuous mode [ 11.720856] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready [ 12.977584] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 12.977698] e1000e 0000:00:19.0 eth1: 10/100 speed: disabling TSO [ 12.977736] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 12.977839] xenbr0: port 1(eth1) entered forwarding state [ 12.977848] xenbr0: port 1(eth1) entered forwarding state [ 12.977918] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready [ 23.895975] XFS (bcache0): Mounting V4 Filesystem [ 24.206434] XFS (bcache0): Ending clean mount [ 24.859646] xen_acpi_processor: Uploading Xen processor PM info [ 28.000014] xenbr0: port 1(eth1) entered forwarding state root@gladstone:/home/peter# _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |