[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v2] xen/arm: register clocks used by the hypervisor



Hi Julien,

Quoting Julien Grall (2016-07-06 06:10:52)
> On 06/07/16 02:34, Michael Turquette wrote:
> > Hi!
> 
> Hello Michael,
> 
> > Quoting Dirk Behme (2016-06-30 03:32:32)
> >> Some clocks might be used by the Xen hypervisor and not by the Linux
> >> kernel. If these are not registered by the Linux kernel, they might be
> >> disabled by clk_disable_unused() as the kernel doesn't know that they
> >> are used. The clock of the serial console handled by Xen is one
> >> example for this. It might be disabled by clk_disable_unused() which
> >> stops the whole serial output, even from Xen, then.
> >
> > This whole thread had me confused until I realized that it all boiled
> > down to some nomenclature issues (for me).
> >
> > This code does not _register_ any clocks. It simply gets them and
> > enables them, which is what every other clk consumer in the Linux kernel
> > does. More details below.
> >
> >>
> >> Up to now, the workaround for this has been to use the Linux kernel
> >> command line parameter 'clk_ignore_unused'. See Xen bug
> >>
> >> http://bugs.xenproject.org/xen/bug/45
> >
> > clk_ignore_unused is a band-aid, not a proper medical solution. Setting
> > that flag will not turn clocks on for you, nor will it guarantee that
> > those clocks are never turned off in the future. It looks like you
> > figured this out correctly in the patch below but it is worth repeating.
> >
> > Also the new CLK_IS_CRITICAL flag might be of interest to you, but that
> > flag only exists as a way to enable clocks that must be enabled for the
> > system to function (hence, "critical") AND when those same clocks do not
> > have an accompanying Linux driver to consume them and enable them.
> 
> I don't think we want the kernel to enable the clock for the hypervisor. 
> We want to tell the kernel "don't touch at all to this clock, it does 
> not belong to you".

But the patch *does* touch the clock from the kernel. It enables the
clock via a call clk_prepare_enable. I'm utterly confused.

Regards,
Mike

> 
> Regards,
> 
> -- 
> Julien Grall

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.