|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v4] xen/arm: Add a clock property
On 13.07.2016 23:03, Michael Turquette wrote: Quoting Dirk Behme (2016-07-13 11:56:30)On 13.07.2016 20:43, Stefano Stabellini wrote:On Wed, 13 Jul 2016, Dirk Behme wrote:On 13.07.2016 00:26, Michael Turquette wrote:Quoting Dirk Behme (2016-07-12 00:46:45)Clocks described by this property are reserved for use by Xen, and the OS must not alter their state any way, such as disabling or gating a clock, or modifying its rate. Ensuring this may impose constraints on parent clocks or other resources used by the clock tree. Ok, thanks, then I think we can forget about using flags for the issue we are discussing here. Best regards DirkP.S.: Would it be an option to merge the v4 patch we are discussing here, then? From the discussion until here, it sounds to me that it's the best option we have at the moment. Maybe improving it in the future, then. They cannot be set in Xen. If the only way to make sure that clk_set_rate and clk_set_parent fail on one of the clocks "owned" by Xen is to set CLK_SET_RATE_GATE and CLK_SET_PARENT_GATE, we'll have to do that. Even if it means introducing a new internal Linux API.And then enable the clocks. All calls to clk_set_parent and clk_set_rate with those clocks in the path will fail, so long as they are prepared and enabled. This implementation detail is specific to Linux and definitely should not go into the binding.This property is used to proxy clocks for devices Xen has taken ownership of, such as UARTs, for which the associated clock controller(s) remain under the control of Dom0.I'm still not completely sure about this type of layering and whether or not it is sane. If you want Xen to manage the clock controller, AND you want Linux guests or dom0 to consume those clocks and manipulate them in other drivers, then this solution won't work. Regards, MikeUp to now, the workaround for this has been to use the Linux kernel command line parameter 'clk_ignore_unused'. See Xen bug http://bugs.xenproject.org/xen/bug/45 too. Signed-off-by: Dirk Behme <dirk.behme@xxxxxxxxxxxx> --- Changes in v4: Switch to the xen.txt description proposed by Mark: https://www.spinics.net/lists/arm-kernel/msg516158.html Changes in v3: Use the xen.txt description proposed by Michael. Thanks! Changes in v2: Drop the Linux implementation details like clk_disable_unused in xen.txt. Documentation/devicetree/bindings/arm/xen.txt | 12 +++++++ arch/arm/xen/enlighten.c | 47 +++++++++++++++++++++++++++ 2 files changed, 59 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt index c9b9321..437e50b 100644 --- a/Documentation/devicetree/bindings/arm/xen.txt +++ b/Documentation/devicetree/bindings/arm/xen.txt @@ -17,6 +17,18 @@ the following properties: A GIC node is also required. This property is unnecessary when booting Dom0 using ACPI. +Optional properties: + +- clocks: a list of phandle + clock-specifier pairs + Clocks described by this property are reserved for use by Xen, and the + OS must not alter their state any way, such as disabling or gating a + clock, or modifying its rate. Ensuring this may impose constraints on + parent clocks or other resources used by the clock tree. + + Note: this property is used to proxy clocks for devices Xen has taken + ownership of, such as UARTs, for which the associated clock + controller(s) remain under the control of Dom0. + To support UEFI on Xen ARM virtual platforms, Xen populates the FDT "uefi" node under /hypervisor with following parameters: diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 47acb36..5c546d0 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -24,6 +24,7 @@ #include <linux/of_fdt.h> #include <linux/of_irq.h> #include <linux/of_address.h> +#include <linux/clk-provider.h> #include <linux/cpuidle.h> #include <linux/cpufreq.h> #include <linux/cpu.h> @@ -444,6 +445,52 @@ static int __init xen_pm_init(void) } late_initcall(xen_pm_init); +/* + * Check if we want to register some clocks, that they + * are not freed because unused by clk_disable_unused(). + * E.g. the serial console clock. + */ +static int __init xen_arm_register_clks(void) +{ + struct clk *clk; + struct device_node *xen_node; + unsigned int i, count; + int ret = 0; + + xen_node = of_find_compatible_node(NULL, NULL, "xen,xen"); + if (!xen_node) { + pr_err("Xen support was detected before, but it has disappeared\n"); + return -EINVAL; + } + + count = of_clk_get_parent_count(xen_node); + if (!count) + goto out; + + for (i = 0; i < count; i++) { + clk = of_clk_get(xen_node, i); + if (IS_ERR(clk)) { + pr_err("Xen failed to register clock %i. Error: %li\n", + i, PTR_ERR(clk)); + ret = PTR_ERR(clk); + goto out; + } + + ret = clk_prepare_enable(clk); + if (ret < 0) { + pr_err("Xen failed to enable clock %i. Error: %i\n", + i, ret); + goto out; + } + } + + ret = 0; + +out: + of_node_put(xen_node); + return ret; +} +late_initcall(xen_arm_register_clks); /* empty stubs */ void xen_arch_pre_suspend(void) { } _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |