|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [ovmf baseline-only test] 66965: regressions - FAIL
This run is configured for baseline tests only. flight 66965 ovmf real [real] http://osstest.xs.citrite.net/~osstest/testlogs/logs/66965/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: build-amd64-xsm 5 xen-build fail REGR. vs. 66958 version targeted for testing: ovmf af90df3cb099ed8e009579b7b55e7142dc0fc410 baseline version: ovmf 1fbd0ca16a997b68ed320340aef18645e71e8a73 Last test of basis 66958 2016-08-10 03:19:59 Z 1 days Testing same since 66965 2016-08-10 21:19:32 Z 1 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Ruiyu Ni <ruiyu.ni@xxxxxxxxx> Shi, Steven <steven.shi@xxxxxxxxx> Steven Shi <steven.shi@xxxxxxxxx> jobs: build-amd64-xsm fail build-i386-xsm pass build-amd64 pass build-i386 pass build-amd64-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-i386-pvops pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass ------------------------------------------------------------ sg-report-flight on osstest.xs.citrite.net logs: /home/osstest/logs images: /home/osstest/images Logs, config files, etc. are available at http://osstest.xs.citrite.net/~osstest/testlogs/logs Test harness code can be found at http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary Push not applicable. ------------------------------------------------------------ commit af90df3cb099ed8e009579b7b55e7142dc0fc410 Author: Shi, Steven <steven.shi@xxxxxxxxx> Date: Wed Aug 3 17:43:06 2016 +0800 ShellPkg-UefiShellCommandLib: Add EFIAPI in VA_List library function Add EFIAPI in CatPrint library function. Every function which uses variable list need explicit use EFIAPI to force use MS ABI. This change is needed to pass CLANG38 build. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Steven Shi <steven.shi@xxxxxxxxx> Reviewed-by: Jaben Carsey <jaben.carsey@xxxxxxxxx> commit ba601bddf8a36b4b63704596842c69b412741bbb Author: Shi, Steven <steven.shi@xxxxxxxxx> Date: Wed Aug 3 17:43:05 2016 +0800 ShellPkg-UefiShellTftpCommandLib: Replace compiler builtin Use explicit CopyMem to replace compiler builtin to do the structure values assignment. This change is needed to pass CLANG38 build. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Steven Shi <steven.shi@xxxxxxxxx> Reviewed-by: Jaben Carsey <jaben.carsey@xxxxxxxxx> commit 6f756db5ea057ff10dd168c7627163cec046a3d9 Author: Shi, Steven <steven.shi@xxxxxxxxx> Date: Wed Aug 3 17:43:04 2016 +0800 BaseTools-Conf:Introduce CLANG38 new toolchain for x86 This adds support for LLVM 3.8.x in LTO mode for IA32 and X64. CLANG38 enable LLVM Link Time Optimization (LTO) and code size optimization flag (-Oz) by default for aggressive code size improvement. CLANG38 X64 code is small code model + PIE. CLANG LTO needs PIE in link flags to generate PIE code correctly, otherwise the PIE is not really enabled. (e.g. OvmfPkgX64 will hang in 64bits SEC at high address because of small model code displacement overflow). Test pass platforms: OVMF (OvmfPkgIa32.dsc, OvmfPkgX64.dsc and OvmfPkgIa32X64.dsc). Test compiler and linker version: LLVM 3.8, GNU ld 2.26. Example steps to use the CLANG38 tool chain to build OVMF platform: 1. Download and extract the llvm 3.8.0 Pre-Built Binaries from http://www.llvm.org/releases/ (e.g. http://www.llvm.org/releases/ 3.8.0/clang+llvm-3.8.0-x86_64-linux-gnu-ubuntu-16.04.tar.xz and extract it as ~/clang38). 2. Copy LLVMgold.so from https://github.com/shijunjing/edk2/blob/ llvm/BaseTools/Bin/LLVMgold.so to above clang lib folder (e.g. ~/clang38/lib/LLVMgold.so) 3. Install new version linker with plugin support (e.g. ld 2.26 in GNU Binutils 2.26 or Ubuntu16.04) $ cd edk2 $ git checkout llvm $ export CLANG38_BIN=path/to/your/clang38/ (e.g. export CLANG38_BIN=~/clang38/bin/) $ source edksetup.sh $ make -C BaseTools/Source/C $ build -t CLANG38 -a X64 -p OvmfPkg/OvmfPkgX64.dsc -n 5 -b DEBUG -DDEBUG_ON_SERIAL_PORT $ cd edk2/Build/OvmfX64/DEBUG_CLANG38/FV $ qemu-system-x86_64.exe -bios OVMF.fd -serial file:serial.log -m 4096 -hda fat:. If you want, you can build and install GNU Binutils 2.26 as below steps in Ubuntu: Download binutils-2.26 source code from http://ftp.gnu.org/gnu/binutils/ and extract it to ~/binutils-2.26 $sudo apt-get install bison $sudo apt-get install flex Install other necessary binutils build tools if missing $ mkdir build $ cd build $ ../binutils-2.26/configure --enable-gold --enable-plugins --disable-werror --prefix=/usr $ make -j 5 $ sudo make install If you want, you can build LLVMgold.so as below steps Download llvm-3.8.0 source code from http://www.llvm.org/releases/ 3.8.0/llvm-3.8.0.src.tar.xz and extract it to ~/llvm-3.8.0.src Download clang3.8.0 source code from http://www.llvm.org/releases/ 3.8.0/cfe-3.8.0.src.tar.xz and extract it to ~/llvm-3.8.0.src/tools/clang Refer http://clang.llvm.org/get_started.html to Install other necessary clang build tools if missing $ mkdir llvm38build $ cd llvm38build If your GNU Binutils 2.26 is in /home/jshi19/binutils-2.26, $ cmake ../llvm-3.8.0.src -G "Unix Makefiles" -DCMAKE_BUILD_TYPE="Release" -DLLVM_TARGETS_TO_BUILD="X86" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_CXX_COMPILER="/usr/bin/g++" -DCMAKE_C_COMPILER="/usr/bin/gcc" -DLLVM_BINUTILS_INCDIR=/home/jshi19/binutils-2.26/include $ make -j 5 LLVMgold The LLVMgold.so is in ~/llvm38build/lib/LLVMgold.so Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Steven Shi <steven.shi@xxxxxxxxx> Reviewed-by: Liming Gao <liming.gao@xxxxxxxxx> commit b5e006edb9387c774ab8d4ac27c14fe81de38d0a Author: Shi, Steven <steven.shi@xxxxxxxxx> Date: Wed Aug 3 17:43:03 2016 +0800 BaseTools-Conf:Remove short dash in ar flag for LLVM Both binutils ar and LLVM ar support "cr", but LLVM ar doens't support add "-" in the flags, and llvm-ar cannot accept "-cr". So remove the short dash "-" to make llvm archives work. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Steven Shi <steven.shi@xxxxxxxxx> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx> commit 5aeafb3a254e7cd9e1fb69a0d391388a51c6e210 Author: Ruiyu Ni <ruiyu.ni@xxxxxxxxx> Date: Mon Aug 8 18:21:32 2016 +0800 ShellPkg/ls: Display the correct directory path Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@xxxxxxxxx> Reviewed-by: Jaben Carsey <jaben.carsey@xxxxxxxxx> Reviewed-by: Tapan Shah <tapandshah@xxxxxxx> commit 47ec935660cd38659efcb414ab2cb819c0cb466e Author: Ruiyu Ni <ruiyu.ni@xxxxxxxxx> Date: Mon Aug 8 15:02:44 2016 +0800 ShellPkg/ls: Fix to support "ls fs0:File.txt" â??ls fs0:\File.txt" can list the file correctly but when the backslash is removed from colon, the file cannot be listed. The patch fixes this issue. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@xxxxxxxxx> Reviewed-by: Jaben Carsey <jaben.carsey@xxxxxxxxx> Reviewed-by: Tapan Shah <tapandshah@xxxxxxx> commit 54b1e0ec814d8a8ac0aea2262ba04d7567545197 Author: Ruiyu Ni <ruiyu.ni@xxxxxxxxx> Date: Mon Aug 8 14:55:10 2016 +0800 MdePkg: Enhance PathRemoveLastItem() to support "FS0:File.txt" The original implementation only looks for very last backslash and removes the string after that. But when the path is like "FS0:File.txt" which doesn't contain backslash, the function cannot work well. The patch enhances the code to look for very last backslash or colon to support the path which doesn't contain backslash. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@xxxxxxxxx> Reviewed-by: Jaben Carsey <jaben.carsey@xxxxxxxxx> Reviewed-by: Tapan Shah <tapandshah@xxxxxxx> commit d25d59cb7ee608deb60137389c2461c6d937f669 Author: Ruiyu Ni <ruiyu.ni@xxxxxxxxx> Date: Fri Aug 5 13:12:56 2016 +0800 ShellPkg: Fix FindFiles() to handle "fsx:EFI\BOOT" path When the FilePattern is similar to "fsx:EFI\BOOT", FindFiles() cannot handle it correctly because it always assumes there is "\\" after "fsx:". Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@xxxxxxxxx> Reviewed-by: Jaben Carsey <jaben.carsey@xxxxxxxxx> Reviewed-by: Tapan Shah <tapandshah@xxxxxxx> commit db2e266a0e926be03fb0e6c86fadf121532912d1 Author: Ruiyu Ni <ruiyu.ni@xxxxxxxxx> Date: Fri Aug 5 13:10:11 2016 +0800 ShellPkg: TAB logic incorrectly shows files in CWD when typing \<TAB> It should shows files in root directory of current map. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@xxxxxxxxx> Reviewed-by: Jaben Carsey <jaben.carsey@xxxxxxxxx> Reviewed-by: Tapan Shah <tapandshah@xxxxxxx> commit 9fcfa150fb6047eaa0e5901c0af3e588586200e3 Author: Ruiyu Ni <ruiyu.ni@xxxxxxxxx> Date: Fri Aug 5 10:24:48 2016 +0800 ShellPkg: TAB logic incorrectly chops out fs0: when typing fs0:<TAB> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@xxxxxxxxx> Reviewed-by: Jaben Carsey <jaben.carsey@xxxxxxxxx> Reviewed-by: Tapan Shah <tapandshah@xxxxxxx> _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |