[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [RFC PATCH 20/24] ARM: vITS: handle INV command



The INV command instructs the ITS to update the configuration data for
a given LPI by re-reading its entry from the property table.
We don't need to care so much about the priority value, but enabling
or disabling an LPI has some effect: We remove or push virtual LPIs
to their VCPUs, also propagate the enable bit to the hardware.

Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
 xen/arch/arm/gic-its.c        | 35 ++++++++++++++++++++
 xen/arch/arm/vgic-its.c       | 74 +++++++++++++++++++++++++++++++++++++++++++
 xen/include/asm-arm/gic-its.h |  3 ++
 3 files changed, 112 insertions(+)

diff --git a/xen/arch/arm/gic-its.c b/xen/arch/arm/gic-its.c
index 766a7cb..6f4329f 100644
--- a/xen/arch/arm/gic-its.c
+++ b/xen/arch/arm/gic-its.c
@@ -215,6 +215,19 @@ static int its_send_cmd_mapd(struct host_its *its, 
uint32_t deviceid,
     return its_send_command(its, cmd);
 }
 
+static int its_send_cmd_inv(struct host_its *its,
+                            uint32_t deviceid, uint32_t eventid)
+{
+    uint64_t cmd[4];
+
+    cmd[0] = GITS_CMD_INV | ((uint64_t)deviceid << 32);
+    cmd[1] = eventid;
+    cmd[2] = 0x00;
+    cmd[3] = 0x00;
+
+    return its_send_command(its, cmd);
+}
+
 int gicv3_its_map_device(struct host_its *hw_its, struct domain *d,
                          int devid, int bits, bool valid)
 {
@@ -655,6 +668,28 @@ uint32_t gicv3_lpi_lookup_lpi(struct domain *d, uint32_t 
host_lpi, int *vcpu_id)
     return hlpi.virt_lpi;
 }
 
+void gicv3_lpi_set_enable(struct host_its *its,
+                          uint32_t deviceid, uint32_t eventid,
+                          uint32_t host_lpi, bool enabled)
+{
+    host_lpi -= 8192;
+
+    if ( host_lpi >= MAX_HOST_LPIS )
+        return;
+
+    if ( !its )
+        return;
+
+    if (enabled)
+        lpi_data.lpi_property[host_lpi] |= LPI_PROP_ENABLED;
+    else
+        lpi_data.lpi_property[host_lpi] &= ~LPI_PROP_ENABLED;
+
+    __flush_dcache_area(&lpi_data.lpi_property[host_lpi], 1);
+    its_send_cmd_inv(its, deviceid, eventid);
+    its_send_cmd_sync(its, 0);
+}
+
 void gicv3_its_dt_init(const struct dt_device_node *node)
 {
     const struct dt_device_node *its = NULL;
diff --git a/xen/arch/arm/vgic-its.c b/xen/arch/arm/vgic-its.c
index 028d234..74da8fc 100644
--- a/xen/arch/arm/vgic-its.c
+++ b/xen/arch/arm/vgic-its.c
@@ -223,6 +223,77 @@ out_unlock:
     return ret;
 }
 
+/* For a given virtual LPI read the enabled bit from the virtual property
+ * table and update the virtual IRQ's state.
+ * This enables or disables the associated hardware LPI, also takes care
+ * of removing or pushing of virtual LPIs to their VCPUs.
+ */
+static void update_lpi_enabled_status(struct virt_its* its,
+                                      struct vcpu *vcpu, uint32_t vlpi,
+                                      uint32_t deviceid, uint32_t eventid,
+                                      uint32_t hlpi)
+{
+    struct pending_irq *pirq = lpi_to_pending(vcpu, vlpi, false);
+    uint8_t property = its->d->arch.vgic.proptable[vlpi - 8192];
+
+    if ( property & LPI_PROP_ENABLED )
+    {
+        if ( pirq )
+        {
+            unsigned long flags;
+
+            set_bit(GIC_IRQ_GUEST_ENABLED, &pirq->status);
+            spin_lock_irqsave(&vcpu->arch.vgic.lock, flags);
+            if ( !list_empty(&pirq->inflight) &&
+                 !test_bit(GIC_IRQ_GUEST_VISIBLE, &pirq->status) )
+                gic_raise_guest_irq(vcpu, vlpi, property & 0xfc);
+            spin_unlock_irqrestore(&vcpu->arch.vgic.lock, flags);
+        }
+        gicv3_lpi_set_enable(its->hw_its, deviceid, eventid, hlpi, true);
+    }
+    else
+    {
+        if ( pirq )
+        {
+            clear_bit(GIC_IRQ_GUEST_ENABLED, &pirq->status);
+            gic_remove_from_queues(vcpu, vlpi);
+        }
+        gicv3_lpi_set_enable(its->hw_its, deviceid, eventid, hlpi, false);
+    }
+}
+
+static int its_handle_inv(struct virt_its *its, uint64_t *cmdptr)
+{
+    uint32_t devid = its_cmd_get_deviceid(cmdptr);
+    uint32_t eventid = its_cmd_get_id(cmdptr);
+    struct vits_itte *itte;
+    struct vcpu *vcpu;
+    uint32_t hlpi, vlpi;
+    int ret = -1;
+
+    spin_lock(&its->its_lock);
+
+    itte = get_devid_evid(its, devid, eventid);
+    if ( !itte )
+        goto out_unlock;
+
+    vcpu = its->d->vcpu[itte->collection];
+    vlpi = itte->vlpi;
+    hlpi = itte->hlpi;
+
+    ret = 0;
+
+    put_devid_evid(its, itte);
+
+out_unlock:
+    spin_unlock(&its->its_lock);
+
+    if ( !ret )
+        update_lpi_enabled_status(its, vcpu, vlpi, devid, eventid, hlpi);
+
+    return ret;
+}
+
 static int its_handle_mapc(struct virt_its *its, uint64_t *cmdptr)
 {
     uint32_t collid = its_cmd_get_collection(cmdptr);
@@ -441,6 +512,9 @@ static int vgic_its_handle_cmds(struct domain *d, struct 
virt_its *its,
         case GITS_CMD_INT:
             its_handle_int(its, cmdptr);
             break;
+        case GITS_CMD_INV:
+            its_handle_inv(its, cmdptr);
+           break;
         case GITS_CMD_MAPC:
             its_handle_mapc(its, cmdptr);
             break;
diff --git a/xen/include/asm-arm/gic-its.h b/xen/include/asm-arm/gic-its.h
index 3f5698d..2cdb3e1 100644
--- a/xen/include/asm-arm/gic-its.h
+++ b/xen/include/asm-arm/gic-its.h
@@ -139,6 +139,9 @@ int gicv3_lpi_allocate_host_lpi(struct host_its *its,
 uint32_t gicv3_lpi_lookup_lpi(struct domain *d, uint32_t host_lpi,
                               int *vcpu_id);
 int gicv3_lpi_change_vcpu(struct domain *d, uint32_t host_lpi, int 
new_vcpu_id);
+void gicv3_lpi_set_enable(struct host_its *its,
+                          uint32_t deviceid, uint32_t eventid,
+                          uint32_t host_lpi, bool enabled);
 int gicv3_lpi_drop_host_lpi(struct host_its *its,
                             uint32_t devid, uint32_t eventid,
                             uint32_t host_lpi);
-- 
2.9.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.