[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [RFC PATCH 03/24] ARM: GICv3 ITS: allocate device and collection table



Hi Andre,

   On Thunderx, MAPD commands are failing with error 0x1,
which mean DEVID out of range.

On Wed, Sep 28, 2016 at 11:54 PM, Andre Przywara <andre.przywara@xxxxxxx> wrote:
> Each ITS maps a pair of a DeviceID (usually the PCI b/d/f triplet) and
> an EventID (the MSI payload or interrupt ID) to a pair of LPI number
> and collection ID, which points to the target CPU.
> This mapping is stored in the device and collection tables, which software
> has to provide for the ITS to use.
> Allocate the required memory and hand it the ITS.
> We limit the number of devices to cover 4 PCI busses for now.
>
> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> ---
>  xen/arch/arm/gic-its.c        | 114 
> ++++++++++++++++++++++++++++++++++++++++++
>  xen/arch/arm/gic-v3.c         |   5 ++
>  xen/include/asm-arm/gic-its.h |  49 +++++++++++++++++-
>  3 files changed, 167 insertions(+), 1 deletion(-)
>
> diff --git a/xen/arch/arm/gic-its.c b/xen/arch/arm/gic-its.c
> index b52dff3..40238a2 100644
> --- a/xen/arch/arm/gic-its.c
> +++ b/xen/arch/arm/gic-its.c
> @@ -21,6 +21,7 @@
>  #include <xen/device_tree.h>
>  #include <xen/libfdt/libfdt.h>
>  #include <asm/p2m.h>
> +#include <asm/io.h>
>  #include <asm/gic.h>
>  #include <asm/gic_v3_defs.h>
>  #include <asm/gic-its.h>
> @@ -38,6 +39,119 @@ static DEFINE_PER_CPU(void *, pending_table);
>          min_t(unsigned int, lpi_data.host_lpi_bits, CONFIG_HOST_LPI_BITS)
>  #define MAX_HOST_LPIS   (BIT(MAX_HOST_LPI_BITS) - 8192)
>
> +#define BASER_ATTR_MASK                                           \
> +        ((0x3UL << GITS_BASER_SHAREABILITY_SHIFT)               | \
> +         (0x7UL << GITS_BASER_OUTER_CACHEABILITY_SHIFT)         | \
> +         (0x7UL << GITS_BASER_INNER_CACHEABILITY_SHIFT))
> +#define BASER_RO_MASK   (GENMASK(52, 48) | GENMASK(58, 56))
> +
> +static uint64_t encode_phys_addr(paddr_t addr, int page_bits)
> +{
> +    uint64_t ret;
> +
> +    if ( page_bits < 16)
> +        return (uint64_t)addr & GENMASK(47, page_bits);
> +
> +    ret = addr & GENMASK(47, 16);
> +    return ret | (addr & GENMASK(51, 48)) >> (48 - 12);
> +}
> +
> +static int gicv3_map_baser(void __iomem *basereg, uint64_t regc, int 
> nr_items)
> +{
> +    uint64_t attr;
> +    int entry_size = (regc >> GITS_BASER_ENTRY_SIZE_SHIFT) & 0x1f;
> +    int pagesz;
> +    int order;
> +    void *buffer = NULL;
> +
> +    attr  = GIC_BASER_InnerShareable << GITS_BASER_SHAREABILITY_SHIFT;
> +    attr |= GIC_BASER_CACHE_SameAsInner << 
> GITS_BASER_OUTER_CACHEABILITY_SHIFT;
> +    attr |= GIC_BASER_CACHE_RaWaWb << GITS_BASER_INNER_CACHEABILITY_SHIFT;
> +
> +    /*
> +     * Loop over the page sizes (4K, 16K, 64K) to find out what the host
> +     * supports.
> +     */
> +    for (pagesz = 0; pagesz < 3; pagesz++)
> +    {
> +        uint64_t reg;
> +        int nr_bytes;
> +
> +        nr_bytes = ROUNDUP(nr_items * entry_size, BIT(pagesz * 2 + 12));
> +        order = get_order_from_bytes(nr_bytes);
> +
> +        if ( !buffer )
> +            buffer = alloc_xenheap_pages(order, 0);
> +        if ( !buffer )
> +            return -ENOMEM;
> +
> +        reg  = attr;
> +        reg |= (pagesz << GITS_BASER_PAGE_SIZE_SHIFT);
> +        reg |= nr_bytes >> (pagesz * 2 + 12);
> +        reg |= regc & BASER_RO_MASK;
> +        reg |= GITS_BASER_VALID;
> +        reg |= encode_phys_addr(virt_to_maddr(buffer), pagesz * 2 + 12);
> +
> +        writeq_relaxed(reg, basereg);
> +        regc = readl_relaxed(basereg);
> +
> +        /* The host didn't like our attributes, just use what it returned. */
> +        if ( (regc & BASER_ATTR_MASK) != attr )
> +            attr = regc & BASER_ATTR_MASK;
> +
> +        /* If the host accepted our page size, we are done. */
> +        if ( (reg & (3UL << GITS_BASER_PAGE_SIZE_SHIFT)) == pagesz )
> +            return 0;
> +
> +        /* Check whether our buffer is aligned to the next page size 
> already. */
> +        if ( !(virt_to_maddr(buffer) & (BIT(pagesz * 2 + 12 + 2) - 1)) )
> +        {
> +            free_xenheap_pages(buffer, order);
> +            buffer = NULL;
> +        }
> +    }
> +
> +    if ( buffer )
> +        free_xenheap_pages(buffer, order);
> +
> +    return -EINVAL;
> +}
> +
> +int gicv3_its_init(struct host_its *hw_its)
> +{
> +    uint64_t reg;
> +    int i;
> +
> +    hw_its->its_base = ioremap_nocache(hw_its->addr, hw_its->size);
> +    if ( !hw_its->its_base )
> +        return -ENOMEM;
> +
> +    for (i = 0; i < 8; i++)
> +    {
> +        void __iomem *basereg = hw_its->its_base + GITS_BASER0 + i * 8;
> +        int type;
> +
> +        reg = readq_relaxed(basereg);
> +        type = (reg >> 56) & 0x7;
> +        switch ( type )
> +        {
> +        case GITS_BASER_TYPE_NONE:
> +            continue;
> +        case GITS_BASER_TYPE_DEVICE:
> +            /* TODO: find some better way of limiting the number of devices 
> */
> +            gicv3_map_baser(basereg, reg, 1024);

Thunderx has larger device id values.
Changing to hw supported device ids makes MAPD commands to pass
and Thunderx to boot.
You can refer to Thunderx bdf numbers here
https://github.com/vijaykilari/its_v6/commit/e1a8ec82ad2bb00b299727d0847b89671e9ba66d

> +            break;
> +        case GITS_BASER_TYPE_COLLECTION:
> +            gicv3_map_baser(basereg, reg, NR_CPUS);
> +            break;
> +        default:
> +            continue;
> +        }
> +    }
> +
> +    return 0;
> +}
> +
>  uint64_t gicv3_lpi_allocate_pendtable(void)
>  {
>      uint64_t reg, attr;
> diff --git a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c
> index 2534aa5..5cf4618 100644
> --- a/xen/arch/arm/gic-v3.c
> +++ b/xen/arch/arm/gic-v3.c
> @@ -29,6 +29,7 @@
>  #include <xen/irq.h>
>  #include <xen/iocap.h>
>  #include <xen/sched.h>
> +#include <xen/err.h>
>  #include <xen/errno.h>
>  #include <xen/delay.h>
>  #include <xen/device_tree.h>
> @@ -1548,6 +1549,7 @@ static int __init gicv3_init(void)
>  {
>      int res, i;
>      uint32_t reg;
> +    struct host_its *hw_its;
>
>      if ( !cpu_has_gicv3 )
>      {
> @@ -1603,6 +1605,9 @@ static int __init gicv3_init(void)
>      res = gicv3_cpu_init();
>      gicv3_hyp_init();
>
> +    list_for_each_entry(hw_its, &host_its_list, entry)
> +        gicv3_its_init(hw_its);
> +
>      spin_unlock(&gicv3.lock);
>
>      return res;
> diff --git a/xen/include/asm-arm/gic-its.h b/xen/include/asm-arm/gic-its.h
> index 48c6c78..589b889 100644
> --- a/xen/include/asm-arm/gic-its.h
> +++ b/xen/include/asm-arm/gic-its.h
> @@ -18,6 +18,47 @@
>  #ifndef __ASM_ARM_ITS_H__
>  #define __ASM_ARM_ITS_H__
>
> +#define LPI_OFFSET      8192
> +
> +#define GITS_CTLR       (0x000)
> +#define GITS_IIDR       (0x004)
> +#define GITS_TYPER      (0x008)
> +#define GITS_CBASER     (0x080)
> +#define GITS_CWRITER    (0x088)
> +#define GITS_CREADR     (0x090)
> +#define GITS_BASER0     (0x100)
> +#define GITS_BASER1     (0x108)
> +#define GITS_BASER2     (0x110)
> +#define GITS_BASER3     (0x118)
> +#define GITS_BASER4     (0x120)
> +#define GITS_BASER5     (0x128)
> +#define GITS_BASER6     (0x130)
> +#define GITS_BASER7     (0x138)
> +
> +/* Register bits */
> +#define GITS_CTLR_ENABLE     0x1
> +#define GITS_IIDR_VALUE      0x34c
> +
> +#define GITS_BASER_VALID                BIT(63)
> +#define GITS_BASER_INDIRECT             BIT(62)
> +#define GITS_BASER_INNER_CACHEABILITY_SHIFT        59
> +#define GITS_BASER_TYPE_SHIFT           56
> +#define GITS_BASER_OUTER_CACHEABILITY_SHIFT        53
> +#define GITS_BASER_TYPE_NONE            0UL
> +#define GITS_BASER_TYPE_DEVICE          1UL
> +#define GITS_BASER_TYPE_VCPU            2UL
> +#define GITS_BASER_TYPE_CPU             3UL
> +#define GITS_BASER_TYPE_COLLECTION      4UL
> +#define GITS_BASER_TYPE_RESERVED5       5UL
> +#define GITS_BASER_TYPE_RESERVED6       6UL
> +#define GITS_BASER_TYPE_RESERVED7       7UL
> +#define GITS_BASER_ENTRY_SIZE_SHIFT     48
> +#define GITS_BASER_SHAREABILITY_SHIFT   10
> +#define GITS_BASER_PAGE_SIZE_SHIFT      8
> +#define GITS_BASER_RO_MASK              ((7UL << GITS_BASER_TYPE_SHIFT) | \
> +                                        (31UL << 
> GITS_BASER_ENTRY_SIZE_SHIFT) |\
> +                                        GITS_BASER_INDIRECT)
> +
>  #ifndef __ASSEMBLY__
>  #include <xen/device_tree.h>
>
> @@ -27,6 +68,7 @@ struct host_its {
>      const struct dt_device_node *dt_node;
>      paddr_t addr;
>      paddr_t size;
> +    void __iomem *its_base;
>  };
>
>  extern struct list_head host_its_list;
> @@ -42,8 +84,9 @@ void gicv3_its_dt_init(const struct dt_device_node *node);
>  uint64_t gicv3_lpi_get_proptable(void);
>  uint64_t gicv3_lpi_allocate_pendtable(void);
>
> -/* Initialize the host structures for LPIs. */
> +/* Initialize the host structures for LPIs and the host ITSes. */
>  int gicv3_lpi_init_host_lpis(int nr_lpis);
> +int gicv3_its_init(struct host_its *hw_its);
>
>  #else
>
> @@ -62,6 +105,10 @@ static inline int gicv3_lpi_init_host_lpis(int nr_lpis)
>  {
>      return 0;
>  }
> +static inline int gicv3_its_init(struct host_its *hw_its)
> +{
> +    return 0;
> +}
>  #endif /* CONFIG_HAS_ITS */
>
>  #endif /* __ASSEMBLY__ */
> --
> 2.9.0
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxx
> https://lists.xen.org/xen-devel

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.