[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v8 4/7] VT-d: Use one function to update both remapped and posted IRTE



Use one function to update both remapped IRTE and posted IRET.

Signed-off-by: Feng Wu <feng.wu@xxxxxxxxx>
---
v8:
- Newly added

 xen/drivers/passthrough/vtd/intremap.c | 162 ++++++++++++++-------------------
 1 file changed, 66 insertions(+), 96 deletions(-)

diff --git a/xen/drivers/passthrough/vtd/intremap.c 
b/xen/drivers/passthrough/vtd/intremap.c
index bfd468b..fd2a49a 100644
--- a/xen/drivers/passthrough/vtd/intremap.c
+++ b/xen/drivers/passthrough/vtd/intremap.c
@@ -420,7 +420,7 @@ void io_apic_write_remap_rte(
         __ioapic_write_entry(apic, ioapic_pin, 1, old_rte);
 }
 
-static void set_msi_source_id(struct pci_dev *pdev, struct iremap_entry *ire)
+static void set_msi_source_id(const struct pci_dev *pdev, struct iremap_entry 
*ire)
 {
     u16 seg;
     u8 bus, devfn, secbus;
@@ -548,11 +548,12 @@ static int remap_entry_to_msi_msg(
 }
 
 static int msi_msg_to_remap_entry(
-    struct iommu *iommu, struct pci_dev *pdev,
-    struct msi_desc *msi_desc, struct msi_msg *msg)
+    struct iommu *iommu, const struct pci_dev *pdev,
+    struct msi_desc *msi_desc, struct msi_msg *msg,
+    const struct pi_desc *pi_desc, const uint8_t gvec)
 {
     struct iremap_entry *iremap_entry = NULL, *iremap_entries;
-    struct iremap_entry new_ire;
+    struct iremap_entry new_ire, old_ire;
     struct msi_msg_remap_entry *remap_rte;
     unsigned int index, i, nr = 1;
     unsigned long flags;
@@ -597,31 +598,50 @@ static int msi_msg_to_remap_entry(
 
     memcpy(&new_ire, iremap_entry, sizeof(struct iremap_entry));
 
-    /* Set interrupt remapping table entry */
-    new_ire.remap.fpd = 0;
-    new_ire.remap.dm = (msg->address_lo >> MSI_ADDR_DESTMODE_SHIFT) & 0x1;
-    new_ire.remap.tm = (msg->data >> MSI_DATA_TRIGGER_SHIFT) & 0x1;
-    new_ire.remap.dlm = (msg->data >> MSI_DATA_DELIVERY_MODE_SHIFT) & 0x1;
-    /* Hardware require RH = 1 for LPR delivery mode */
-    new_ire.remap.rh = (new_ire.remap.dlm == dest_LowestPrio);
-    new_ire.remap.avail = 0;
-    new_ire.remap.res_1 = 0;
-    new_ire.remap.vector = (msg->data >> MSI_DATA_VECTOR_SHIFT) &
-                            MSI_DATA_VECTOR_MASK;
-    new_ire.remap.res_2 = 0;
-    if ( x2apic_enabled )
-        new_ire.remap.dst = msg->dest32;
+    if ( !pi_desc )
+    {
+        /* Set interrupt remapping table entry */
+        new_ire.remap.fpd = 0;
+        new_ire.remap.dm = (msg->address_lo >> MSI_ADDR_DESTMODE_SHIFT) & 0x1;
+        new_ire.remap.tm = (msg->data >> MSI_DATA_TRIGGER_SHIFT) & 0x1;
+        new_ire.remap.dlm = (msg->data >> MSI_DATA_DELIVERY_MODE_SHIFT) & 0x1;
+        /* Hardware require RH = 1 for LPR delivery mode */
+        new_ire.remap.rh = (new_ire.remap.dlm == dest_LowestPrio);
+        new_ire.remap.avail = 0;
+        new_ire.remap.res_1 = 0;
+        new_ire.remap.vector = (msg->data >> MSI_DATA_VECTOR_SHIFT) &
+                                MSI_DATA_VECTOR_MASK;
+        new_ire.remap.res_2 = 0;
+        if ( x2apic_enabled )
+            new_ire.remap.dst = msg->dest32;
+        else
+            new_ire.remap.dst = ((msg->address_lo >> MSI_ADDR_DEST_ID_SHIFT)
+                                 & 0xff) << 8;
+
+        new_ire.remap.res_3 = 0;
+        new_ire.remap.res_4 = 0;
+        new_ire.remap.p = 1;    /* finally, set present bit */
+    }
     else
-        new_ire.remap.dst = ((msg->address_lo >> MSI_ADDR_DEST_ID_SHIFT)
-                             & 0xff) << 8;
+    {
+        new_ire.post.fpd = 0;
+        new_ire.post.res_1 = 0;
+        new_ire.post.res_2 = 0;
+        new_ire.post.urg = 0;
+        new_ire.post.im = 1;
+        new_ire.post.vector = gvec;
+        new_ire.post.res_3 = 0;
+        new_ire.post.res_4 = 0;
+        new_ire.post.res_5 = 0;
+        new_ire.post.pda_l = virt_to_maddr(pi_desc) >> (32 - PDA_LOW_BIT);
+        new_ire.post.pda_h = virt_to_maddr(pi_desc) >> 32;
+        new_ire.post.p = 1;    /* finally, set present bit */
+    }
 
     if ( pdev )
         set_msi_source_id(pdev, &new_ire);
     else
         set_hpet_source_id(msi_desc->hpet_id, &new_ire);
-    new_ire.remap.res_3 = 0;
-    new_ire.remap.res_4 = 0;
-    new_ire.remap.p = 1;    /* finally, set present bit */
 
     /* now construct new MSI/MSI-X rte entry */
     remap_rte = (struct msi_msg_remap_entry *)msg;
@@ -637,7 +657,23 @@ static int msi_msg_to_remap_entry(
     remap_rte->address_hi = 0;
     remap_rte->data = index - i;
 
-    memcpy(iremap_entry, &new_ire, sizeof(struct iremap_entry));
+    if ( !pi_desc )
+        memcpy(iremap_entry, &new_ire, sizeof(struct iremap_entry));
+    else
+    {
+        __uint128_t ret;
+
+        old_ire = *iremap_entry;
+        ret = cmpxchg16b(iremap_entry, &old_ire, &new_ire);
+
+        /*
+         * In the above, we use cmpxchg16 to atomically update the 128-bit 
IRTE,
+         * and the hardware cannot update the IRTE behind us, so the return 
value
+         * of cmpxchg16 should be the same as old_ire. This ASSERT validate it.
+         */
+        ASSERT(ret == old_ire.val);
+    }
+
     iommu_flush_cache_entry(iremap_entry, sizeof(struct iremap_entry));
     iommu_flush_iec_index(iommu, 0, index);
 
@@ -668,7 +704,8 @@ int msi_msg_write_remap_rte(
 
     drhd = pdev ? acpi_find_matched_drhd_unit(pdev)
                 : hpet_to_drhd(msi_desc->hpet_id);
-    return drhd ? msi_msg_to_remap_entry(drhd->iommu, pdev, msi_desc, msg)
+    return drhd ? msi_msg_to_remap_entry(drhd->iommu, pdev,
+                                         msi_desc, msg, NULL, 0)
                 : -EINVAL;
 }
 
@@ -902,42 +939,6 @@ void iommu_disable_x2apic_IR(void)
         disable_qinval(drhd->iommu);
 }
 
-static void setup_posted_irte(
-    struct iremap_entry *new_ire, const struct iremap_entry *old_ire,
-    const struct pi_desc *pi_desc, const uint8_t gvec)
-{
-    memset(new_ire, 0, sizeof(*new_ire));
-
-    /*
-     * 'im' filed decides whether the irte is in posted format (with value 1)
-     * or remapped format (with value 0), if the old irte is in remapped 
format,
-     * we copy things from remapped part in 'struct iremap_entry', otherwise,
-     * we copy from posted part.
-     */
-    if ( !old_ire->remap.im )
-    {
-        new_ire->post.p = old_ire->remap.p;
-        new_ire->post.fpd = old_ire->remap.fpd;
-        new_ire->post.sid = old_ire->remap.sid;
-        new_ire->post.sq = old_ire->remap.sq;
-        new_ire->post.svt = old_ire->remap.svt;
-    }
-    else
-    {
-        new_ire->post.p = old_ire->post.p;
-        new_ire->post.fpd = old_ire->post.fpd;
-        new_ire->post.sid = old_ire->post.sid;
-        new_ire->post.sq = old_ire->post.sq;
-        new_ire->post.svt = old_ire->post.svt;
-        new_ire->post.urg = old_ire->post.urg;
-    }
-
-    new_ire->post.im = 1;
-    new_ire->post.vector = gvec;
-    new_ire->post.pda_l = virt_to_maddr(pi_desc) >> (32 - PDA_LOW_BIT);
-    new_ire->post.pda_h = virt_to_maddr(pi_desc) >> 32;
-}
-
 /*
  * This function is used to update the IRTE for posted-interrupt
  * when guest changes MSI/MSI-X information.
@@ -946,17 +947,12 @@ int pi_update_irte(const struct vcpu *v, const struct 
pirq *pirq,
     const uint8_t gvec)
 {
     struct irq_desc *desc;
-    const struct msi_desc *msi_desc;
-    int remap_index;
+    struct msi_desc *msi_desc;
     int rc = 0;
     const struct pci_dev *pci_dev;
     const struct acpi_drhd_unit *drhd;
     struct iommu *iommu;
-    struct ir_ctrl *ir_ctrl;
-    struct iremap_entry *iremap_entries = NULL, *p = NULL;
-    struct iremap_entry new_ire, old_ire;
     const struct pi_desc *pi_desc = &v->arch.hvm_vmx.pi_desc;
-    __uint128_t ret;
 
     desc = pirq_spin_lock_irq_desc(pirq, NULL);
     if ( !desc )
@@ -976,8 +972,6 @@ int pi_update_irte(const struct vcpu *v, const struct pirq 
*pirq,
         goto unlock_out;
     }
 
-    remap_index = msi_desc->remap_index;
-
     spin_unlock_irq(&desc->lock);
 
     ASSERT(pcidevs_locked());
@@ -992,35 +986,11 @@ int pi_update_irte(const struct vcpu *v, const struct 
pirq *pirq,
         return -ENODEV;
 
     iommu = drhd->iommu;
-    ir_ctrl = iommu_ir_ctrl(iommu);
-    if ( !ir_ctrl )
+    if ( !iommu_ir_ctrl(iommu) )
         return -ENODEV;
 
-    spin_lock_irq(&ir_ctrl->iremap_lock);
-
-    GET_IREMAP_ENTRY(ir_ctrl->iremap_maddr, remap_index, iremap_entries, p);
-
-    old_ire = *p;
-
-    /* Setup/Update interrupt remapping table entry. */
-    setup_posted_irte(&new_ire, &old_ire, pi_desc, gvec);
-    ret = cmpxchg16b(p, &old_ire, &new_ire);
-
-    /*
-     * In the above, we use cmpxchg16 to atomically update the 128-bit IRTE,
-     * and the hardware cannot update the IRTE behind us, so the return value
-     * of cmpxchg16 should be the same as old_ire. This ASSERT validate it.
-     */
-    ASSERT(ret == old_ire.val);
-
-    iommu_flush_cache_entry(p, sizeof(*p));
-    iommu_flush_iec_index(iommu, 0, remap_index);
-
-    unmap_vtd_domain_page(iremap_entries);
-
-    spin_unlock_irq(&ir_ctrl->iremap_lock);
-
-    return 0;
+    return msi_msg_to_remap_entry(iommu, pci_dev, msi_desc, &msi_desc->msg,
+                                  pi_desc, gvec);
 
  unlock_out:
     spin_unlock_irq(&desc->lock);
-- 
2.1.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.