|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [qemu-mainline baseline-only test] 68339: regressions - FAIL
This run is configured for baseline tests only. flight 68339 qemu-mainline real [real] http://osstest.xs.citrite.net/~osstest/testlogs/logs/68339/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: build-amd64-xsm 5 xen-build fail REGR. vs. 68328 test-armhf-armhf-libvirt 11 guest-start fail REGR. vs. 68328 test-armhf-armhf-xl-xsm 15 guest-start/debian.repeat fail REGR. vs. 68328 test-armhf-armhf-xl-vhd 14 guest-start/debian.repeat fail REGR. vs. 68328 Regressions which are regarded as allowable (not blocking): test-amd64-amd64-qemuu-nested-intel 16 debian-hvm-install/l1/l2 fail like 68328 test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 9 windows-install fail like 68328 Tests which did not succeed, but are not blocking: test-amd64-i386-xl-xsm 1 build-check(1) blocked n/a test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 1 build-check(1) blocked n/a test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm 1 build-check(1) blocked n/a test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm 1 build-check(1) blocked n/a test-amd64-i386-libvirt-xsm 1 build-check(1) blocked n/a test-amd64-amd64-libvirt-xsm 1 build-check(1) blocked n/a test-amd64-amd64-xl-xsm 1 build-check(1) blocked n/a test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 1 build-check(1) blocked n/a test-amd64-amd64-xl-pvh-intel 11 guest-start fail never pass test-armhf-armhf-xl-midway 12 migrate-support-check fail never pass test-armhf-armhf-xl-midway 13 saverestore-support-check fail never pass test-armhf-armhf-libvirt-xsm 12 migrate-support-check fail never pass test-armhf-armhf-xl 12 migrate-support-check fail never pass test-armhf-armhf-xl-xsm 12 migrate-support-check fail never pass test-armhf-armhf-xl-xsm 13 saverestore-support-check fail never pass test-armhf-armhf-xl 13 saverestore-support-check fail never pass test-armhf-armhf-libvirt-xsm 14 guest-saverestore fail never pass test-armhf-armhf-xl-credit2 12 migrate-support-check fail never pass test-armhf-armhf-xl-credit2 13 saverestore-support-check fail never pass test-armhf-armhf-xl-multivcpu 12 migrate-support-check fail never pass test-armhf-armhf-xl-multivcpu 13 saverestore-support-check fail never pass test-armhf-armhf-xl-rtds 12 migrate-support-check fail never pass test-armhf-armhf-xl-rtds 13 saverestore-support-check fail never pass test-amd64-i386-libvirt 12 migrate-support-check fail never pass test-armhf-armhf-libvirt-qcow2 11 migrate-support-check fail never pass test-armhf-armhf-libvirt-qcow2 13 guest-saverestore fail never pass test-armhf-armhf-libvirt-raw 11 migrate-support-check fail never pass test-armhf-armhf-libvirt-raw 13 guest-saverestore fail never pass test-amd64-amd64-libvirt 12 migrate-support-check fail never pass test-armhf-armhf-xl-vhd 11 migrate-support-check fail never pass test-armhf-armhf-xl-vhd 12 saverestore-support-check fail never pass test-amd64-amd64-xl-pvh-amd 11 guest-start fail never pass test-amd64-amd64-qemuu-nested-amd 16 debian-hvm-install/l1/l2 fail never pass test-amd64-amd64-libvirt-vhd 11 migrate-support-check fail never pass test-amd64-amd64-xl-qemuu-win7-amd64 16 guest-stop fail never pass test-amd64-i386-xl-qemuu-win7-amd64 16 guest-stop fail never pass version targeted for testing: qemuu ffe22bf51065dd33022cf91f77a821d1f11c250d baseline version: qemuu e92fbc753df4fab9ee524b5ea07a51bee8b6bae4 Last test of basis 68328 2017-01-06 02:15:41 Z 2 days Testing same since 68339 2017-01-07 13:19:15 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Andrey Smirnov <andrew.smirnov@xxxxxxxxx> Gonglei <arei.gonglei@xxxxxxxxxx> Hervé Poussineau <hpoussin@xxxxxxxxxxx> Jason Wang <jasowang@xxxxxxxxxx> Longpeng(Mike) <longpeng2@xxxxxxxxxx> Pavel Dovgalyuk <pavel.dovgaluk@xxxxxxxxx> Peter Maydell <peter.maydell@xxxxxxxxxx> jobs: build-amd64-xsm fail build-armhf-xsm pass build-i386-xsm pass build-amd64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops pass test-amd64-amd64-xl pass test-armhf-armhf-xl pass test-amd64-i386-xl pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm blocked test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm blocked test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm blocked test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm blocked test-amd64-amd64-libvirt-xsm blocked test-armhf-armhf-libvirt-xsm fail test-amd64-i386-libvirt-xsm blocked test-amd64-amd64-xl-xsm blocked test-armhf-armhf-xl-xsm fail test-amd64-i386-xl-xsm blocked test-amd64-amd64-qemuu-nested-amd fail test-amd64-amd64-xl-pvh-amd fail test-amd64-i386-qemuu-rhel6hvm-amd pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-freebsd10-amd64 pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass test-amd64-amd64-xl-qemuu-win7-amd64 fail test-amd64-i386-xl-qemuu-win7-amd64 fail test-amd64-amd64-xl-credit2 pass test-armhf-armhf-xl-credit2 pass test-amd64-i386-freebsd10-i386 pass test-amd64-amd64-qemuu-nested-intel fail test-amd64-amd64-xl-pvh-intel fail test-amd64-i386-qemuu-rhel6hvm-intel pass test-amd64-amd64-libvirt pass test-armhf-armhf-libvirt fail test-amd64-i386-libvirt pass test-armhf-armhf-xl-midway pass test-amd64-amd64-xl-multivcpu pass test-armhf-armhf-xl-multivcpu pass test-amd64-amd64-pair pass test-amd64-i386-pair pass test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair pass test-amd64-amd64-amd64-pvgrub pass test-amd64-amd64-i386-pvgrub pass test-amd64-amd64-pygrub pass test-armhf-armhf-libvirt-qcow2 fail test-amd64-amd64-xl-qcow2 pass test-armhf-armhf-libvirt-raw fail test-amd64-i386-xl-raw pass test-amd64-amd64-xl-rtds pass test-armhf-armhf-xl-rtds pass test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 fail test-amd64-amd64-libvirt-vhd pass test-armhf-armhf-xl-vhd fail test-amd64-amd64-xl-qemuu-winxpsp3 pass test-amd64-i386-xl-qemuu-winxpsp3 pass ------------------------------------------------------------ sg-report-flight on osstest.xs.citrite.net logs: /home/osstest/logs images: /home/osstest/images Logs, config files, etc. are available at http://osstest.xs.citrite.net/~osstest/testlogs/logs Test harness code can be found at http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary Push not applicable. ------------------------------------------------------------ commit ffe22bf51065dd33022cf91f77a821d1f11c250d Merge: a01b1e9 48ae36c Author: Peter Maydell <peter.maydell@xxxxxxxxxx> Date: Fri Jan 6 15:18:09 2017 +0000 Merge remote-tracking branch 'remotes/gonglei/tags/cryptodev-next-20161224' into staging cryptodev patches - add xts mode support - add 3DES algorithm support - other trivial fixes # gpg: Signature made Sat 24 Dec 2016 05:56:44 GMT # gpg: using RSA key 0x2ED7FDE9063C864D # gpg: Good signature from "Gonglei <arei.gonglei@xxxxxxxxxx>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 3EF1 8E53 3459 E6D1 963A 3C05 2ED7 FDE9 063C 864D * remotes/gonglei/tags/cryptodev-next-20161224: cryptodev: add 3des-ede support cryptodev: remove single-DES support in cryptodev cryptodev: add xts(aes) support cryptodev: fix the check of aes algorithm Signed-off-by: Peter Maydell <peter.maydell@xxxxxxxxxx> commit a01b1e9a005d523ec6452ec7137885d11f8a30df Merge: e92fbc7 7e354ed Author: Peter Maydell <peter.maydell@xxxxxxxxxx> Date: Fri Jan 6 12:10:40 2017 +0000 Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging # gpg: Signature made Fri 06 Jan 2017 02:55:49 GMT # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@xxxxxxxxxx>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: fsl_etsec: Fix Tx BD ring wrapping handling rtl8139: correctly handle PHY reset record/replay: add network support Signed-off-by: Peter Maydell <peter.maydell@xxxxxxxxxx> commit 7e354ed4df9787ff95cdb189374739e476be4f9a Author: Andrey Smirnov <andrew.smirnov@xxxxxxxxx> Date: Thu Jan 5 12:26:36 2017 -0800 fsl_etsec: Fix Tx BD ring wrapping handling Current code that handles Tx buffer desciprtor ring scanning employs the following algorithm: 1. Restore current buffer descriptor pointer from TBPTRn 2. Process current descriptor 3. If current descriptor has BD_WRAP flag set set current descriptor pointer to start of the descriptor ring 4. If current descriptor points to start of the ring exit the loop, otherwise increment current descriptor pointer and go to #2 5. Store current descriptor in TBPTRn The way the code is implemented results in buffer descriptor ring being scanned starting at offset/descriptor #0. While covering 99% of the cases, this algorithm becomes problematic for a number of edge cases. Consider the following scenario: guest OS driver initializes descriptor ring to N individual descriptors and starts sending data out. Depending on the volume of traffic and probably guest OS driver implementation it is possible that an edge case where a packet, spread across 2 descriptors is placed in descriptors N - 1 and 0 in that order(it is easy to imagine similar examples involving more than 2 descriptors). What happens then is aforementioned algorithm starts at descriptor 0, sees a descriptor marked as BD_LAST, which it happily sends out as a separate packet(very much malformed at this point) then the iteration continues and the first part of the original packet is tacked to the next transmission which ends up being bogus as well. This behvaiour can be pretty reliably observed when scp'ing data from a guest OS via TAP interface for files larger than 160K (every time for 700K+). This patch changes the scanning algorithm to do the following: 1. Restore "current" buffer descriptor pointer from TBPTRn 2. If "current" descriptor does not have BD_TX_READY set, goto #6 3. Process current descriptor 4. If "current" descriptor has BD_WRAP flag set "current" descriptor pointer to start of the descriptor ring otherwise set increment "current" by the size of one descriptor 5. Goto #1 6. Save "current" buffer descriptor in TBPTRn This way we preserve the information about which descriptor was processed last and always start where we left off avoiding the original problem. On top of that, judging by the following excerpt from MPC8548ERM (p. 14-48): "... When the end of the TxBD ring is reached, eTSEC initializes TBPTRn to the value in the corresponding TBASEn. The TBPTR register is internally written by the eTSECâ??s DMA controller during transmission. The pointer increments by eight (bytes) each time a descriptor is closed successfully by the eTSEC..." revised algorithm might also a more correct way of emulating this aspect of eTSEC peripheral. Cc: Alexander Graf <agraf@xxxxxxx> Cc: Scott Wood <scottwood@xxxxxxxxxxxxx> Cc: Jason Wang <jasowang@xxxxxxxxxx> Cc: qemu-devel@xxxxxxxxxx Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx> Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx> commit 30a3e70167d0b8db9ea057f270cf18d93c153ed1 Author: Hervé Poussineau <hpoussin@xxxxxxxxxxx> Date: Tue Dec 13 20:44:41 2016 +0100 rtl8139: correctly handle PHY reset According to datasheet: "[Bit 15 of Basic Mode Control Register] sets the status and control registers of the PHY (register 0062-0074) in a default state. This bit is self-clearing. 1 = software reset; 0 = normal operation." This fixes the netcard detection failure in Minoca OS. Signed-off-by: Hervé Poussineau <hpoussin@xxxxxxxxxxx> Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx> commit 646c5478c04297485e3e045cd8969d2ae7642004 Author: Pavel Dovgalyuk <pavel.dovgaluk@xxxxxxxxx> Date: Mon Sep 26 11:08:21 2016 +0300 record/replay: add network support This patch adds support of recording and replaying network packets in irount rr mode. Record and replay for network interactions is performed with the network filter. Each backend must have its own instance of the replay filter as follows: -netdev user,id=net1 -device rtl8139,netdev=net1 -object filter-replay,id=replay,netdev=net1 Replay network filter is used to record and replay network packets. While recording the virtual machine this filter puts all packets coming from the outer world into the log. In replay mode packets from the log are injected into the network device. All interactions with network backend in replay mode are disabled. v5 changes: - using iov_to_buf function instead of loop Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@xxxxxxxxx> Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx> commit 48ae36c0ad16bb757d4f6e243b8e9072fc8e8c8e Author: Longpeng(Mike) <longpeng2@xxxxxxxxxx> Date: Thu Dec 8 10:44:02 2016 +0800 cryptodev: add 3des-ede support This patch add 3des-ede support for cryptodev. However this is effective only when backend using libgcrypt/nettle, because cipher-builtin doesn't support 3des-ede yet. Signed-off-by: Longpeng(Mike) <longpeng2@xxxxxxxxxx> Signed-off-by: Gonglei <arei.gonglei@xxxxxxxxxx> commit d7a2127a4c5b2d52c94d5c27a5744a055ddc14f7 Author: Longpeng(Mike) <longpeng2@xxxxxxxxxx> Date: Wed Dec 7 09:11:50 2016 +0800 cryptodev: remove single-DES support in cryptodev Single-DES is obsolete and it's broken/useless for decades, we should remove it in cryptodev, as suggested by Daniel. Guest who wants to use this obsolete cipher alg will use its built-in implementation instead. Signed-off-by: Longpeng(Mike) <longpeng2@xxxxxxxxxx> Reviewed-by: Daniel P. Berrange <berrange@xxxxxxxxxx> Signed-off-by: Gonglei <arei.gonglei@xxxxxxxxxx> commit eaa57403044c33e0f3e9c6f7c174b05e6534fec4 Author: Longpeng(Mike) <longpeng2@xxxxxxxxxx> Date: Mon Dec 5 19:39:09 2016 +0800 cryptodev: add xts(aes) support This patch add xts(aes) support. Signed-off-by: Longpeng(Mike) <longpeng2@xxxxxxxxxx> Reviewed-by: Gonglei <arei.gonglei@xxxxxxxxxx> Signed-off-by: Gonglei <arei.gonglei@xxxxxxxxxx> commit 465f2fedd262cbdcbfc92c181660cf85e5029515 Author: Longpeng(Mike) <longpeng2@xxxxxxxxxx> Date: Mon Dec 5 19:39:08 2016 +0800 cryptodev: fix the check of aes algorithm As the key length of xts(aes) is different with other mode of aes, so we should check specially in cryptodev_builtin_get_aes_algo, if it is xts mode. Signed-off-by: Longpeng(Mike) <longpeng2@xxxxxxxxxx> Reviewed-by: Gonglei <arei.gonglei@xxxxxxxxxx> Signed-off-by: Gonglei <arei.gonglei@xxxxxxxxxx> _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |