|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [DOC v8] PV Calls protocol design
Changes in v8:
- introduce the concept of indexes page
- many clarifications
- add a diagram
- introduce support for multiple versions of the protocol
Changes in v7:
- add a glossary of Xen terms
- add a paragraph on why Xen was chosen
- wording improvements
- add links to xenstore documents and headers
- specify that the current version is "1"
- rename max-dataring-page-order to max-page-order
- rename networking-calls to function-calls
- add links to [Data ring] throughout the document
- explain the difference between req_id and id
- mention that future commands larger than 56 bytes will require a
version increase
- mention that the list of commands is in calling order
- clarify that reuse data rings are found by ref
- rename ENOTSUPP to ENOTSUP
- add padding in struct pvcalls_data_intf for cachelining
- rename pvcalls_ring_queued to pvcalls_ring_unconsumed
Changes in v6:
- add reuse field in release command
- add "networking-calls" backend node on xenstore
- fixed tab/whitespace indentation
Changes in v5:
- clarify text
- rename id to req_id
- rename sockid to id
- move id to request and response specific fields
- add version node to xenstore
Changes in v4:
- rename xensock to pvcalls
Changes in v3:
- add a dummy element to struct xen_xensock_request to make sure the
size of the struct is the same on both x86_32 and x86_64
Changes in v2:
- add max-dataring-page-order
- add "Publish backend features and transport parameters" to backend
xenbus workflow
- update new cmd values
- update xen_xensock_request
- add backlog parameter to listen and binary layout
- add description of new data ring format (interface+data)
- modify connect and accept to reflect new data ring format
- add link to POSIX docs
- add error numbers
- add address format section and relevant numeric definitions
- add explicit mention of unimplemented commands
- add protocol node name
- add xenbus shutdown diagram
- add socket operation
---
# PV Calls Protocol version 1
## Glossary
The following is a list of terms and definitions used in the Xen
community. If you are a Xen contributor you can skip this section.
* PV
Short for paravirtualized.
* Dom0
First virtual machine that boots. In most configurations Dom0 is
privileged and has control over hardware devices, such as network
cards, graphic cards, etc.
* DomU
Regular unprivileged Xen virtual machine.
* Domain
A Xen virtual machine. Dom0 and all DomUs are all separate Xen
domains.
* Guest
Same as domain: a Xen virtual machine.
* Frontend
Each DomU has one or more paravirtualized frontend drivers to access
disks, network, console, graphics, etc. The presence of PV devices is
advertized on XenStore, a cross domain key-value database. Frontends
are similar in intent to the virtio drivers in Linux.
* Backend
A Xen paravirtualized backend typically runs in Dom0 and it is used to
export disks, network, console, graphics, etcs, to DomUs. Backends can
live both in kernel space and in userspace. For example xen-blkback
lives under drivers/block in the Linux kernel and xen_disk lives under
hw/block in QEMU. Paravirtualized backends are similar in intent to
virtio device emulators.
* VMX and SVM
On Intel processors, VMX is the CPU flag for VT-x, hardware
virtualization support. It corresponds to SVM on AMD processors.
## Rationale
PV Calls is a paravirtualized protocol that allows the implementation of
a set of POSIX functions in a different domain. The PV Calls frontend
sends POSIX function calls to the backend, which implements them and
returns a value to the frontend and acts on the function call.
This version of the document covers networking function calls, such as
connect, accept, bind, release, listen, poll, recvmsg and sendmsg; but
the protocol is meant to be easily extended to cover different sets of
calls. Unimplemented commands return ENOTSUP.
PV Calls provide the following benefits:
* full visibility of the guest behavior on the backend domain, allowing
for inexpensive filtering and manipulation of any guest calls
* excellent performance
Specifically, PV Calls for networking offer these advantages:
* guest networking works out of the box with VPNs, wireless networks and
any other complex configurations on the host
* guest services listen on ports bound directly to the backend domain IP
addresses
* localhost becomes a secure host wide network for inter-VMs
communications
## Design
### Why Xen?
PV Calls are part of an effort to create a secure runtime environment
for containers (Open Containers Initiative images to be precise). PV
Calls are based on Xen, although porting them to other hypervisors is
possible. Xen was chosen because of its security and isolation
properties and because it supports PV guests, a type of virtual machines
that does not require hardware virtualization extensions (VMX on Intel
processors and SVM on AMD processors). This is important because PV
Calls is meant for containers and containers are often run on top of
public cloud instances, which do not support nested VMX (or SVM) as of
today (early 2017). Xen PV guests are lightweight, minimalist, and do
not require machine emulation: all properties that make them a good fit
for this project.
### Xenstore
The frontend and the backend connect via [xenstore] to
exchange information. The toolstack creates front and back nodes with
state of [XenbusStateInitialising]. The protocol node name
is **pvcalls**. There can only be one PV Calls frontend per domain.
#### Frontend XenBus Nodes
version
Values: <string>
Protocol version, chosen among the ones supported by the backend
(see **versions** under [Backend XenBus Nodes]). Currently the
value must be "1".
port
Values: <uint32_t>
The identifier of the Xen event channel used to signal activity
in the command ring.
ring-ref
Values: <uint32_t>
The Xen grant reference granting permission for the backend to map
the sole page in a single page sized command ring.
#### Backend XenBus Nodes
versions
Values: <string>
List of comma separated protocol versions supported by the backend.
For example "1,2,3". Currently the value is just "1", as there is
only one version.
max-page-order
Values: <uint32_t>
The maximum supported size of a memory allocation in units of
log2n(machine pages), e.g. 0 == 1 page, 1 = 2 pages, 2 == 4 pages,
etc.
function-calls
Values: <uint32_t>
Value "0" means that no calls are supported.
Value "1" means that socket, connect, release, bind, listen, accept
and poll are supported.
#### State Machine
Initialization:
*Front* *Back*
XenbusStateInitialising XenbusStateInitialising
- Query virtual device - Query backend device
properties. identification data.
- Setup OS device instance. - Publish backend features
- Allocate and initialize the and transport parameters
request ring. |
- Publish transport parameters |
that will be in effect during V
this connection. XenbusStateInitWait
|
|
V
XenbusStateInitialised
- Query frontend transport parameters.
- Connect to the request ring and
event channel.
|
|
V
XenbusStateConnected
- Query backend device properties.
- Finalize OS virtual device
instance.
|
|
V
XenbusStateConnected
Once frontend and backend are connected, they have a shared page, which
will is used to exchange messages over a ring, and an event channel,
which is used to send notifications.
Shutdown:
*Front* *Back*
XenbusStateConnected XenbusStateConnected
|
|
V
XenbusStateClosing
- Unmap grants
- Unbind event channels
|
|
V
XenbusStateClosing
- Unbind event channels
- Free rings
- Free data structures
|
|
V
XenbusStateClosed
- Free remaining data structures
|
|
V
XenbusStateClosed
### Commands Ring
The shared ring is used by the frontend to forward POSIX function calls
to the backend. We shall refer to this ring as **commands ring** to
distinguish it from other rings which can be created later in the
lifecycle of the protocol (see [Indexes Page and Data ring]). The grant
reference for shared page for this ring is shared on xenstore (see
[Frontend XenBus Nodes]). The ring format is defined using the familiar
`DEFINE_RING_TYPES` macro (`xen/include/public/io/ring.h`). Frontend
requests are allocated on the ring using the `RING_GET_REQUEST` macro.
The list of commands below is in calling order.
The format is defined as follows:
#define PVCALLS_SOCKET 0
#define PVCALLS_CONNECT 1
#define PVCALLS_RELEASE 2
#define PVCALLS_BIND 3
#define PVCALLS_LISTEN 4
#define PVCALLS_ACCEPT 5
#define PVCALLS_POLL 6
struct xen_pvcalls_request {
uint32_t req_id; /* private to guest, echoed in response */
uint32_t cmd; /* command to execute */
union {
struct xen_pvcalls_socket {
uint64_t id;
uint32_t domain;
uint32_t type;
uint32_t protocol;
#ifdef CONFIG_X86_32
uint8_t pad[4];
#endif
} socket;
struct xen_pvcalls_connect {
uint64_t id;
uint8_t addr[28];
uint32_t len;
uint32_t flags;
grant_ref_t ref;
uint32_t evtchn;
#ifdef CONFIG_X86_32
uint8_t pad[4];
#endif
} connect;
struct xen_pvcalls_release {
uint64_t id;
uint8_t reuse;
#ifdef CONFIG_X86_32
uint8_t pad[7];
#endif
} release;
struct xen_pvcalls_bind {
uint64_t id;
uint8_t addr[28];
uint32_t len;
} bind;
struct xen_pvcalls_listen {
uint64_t id;
uint32_t backlog;
#ifdef CONFIG_X86_32
uint8_t pad[4];
#endif
} listen;
struct xen_pvcalls_accept {
uint64_t id;
uint64_t id_new;
grant_ref_t ref;
uint32_t evtchn;
} accept;
struct xen_pvcalls_poll {
uint64_t id;
} poll;
/* dummy member to force sizeof(struct xen_pvcalls_request) to
match across archs */
struct xen_pvcalls_dummy {
uint8_t dummy[56];
} dummy;
} u;
};
The first two fields are common for every command. Their binary layout
is:
0 4 8
+-------+-------+
|req_id | cmd |
+-------+-------+
- **req_id** is generated by the frontend and is a cookie used to
identify one specific request/response pair of commands. Not to be
confused with any command **id** which are used to identify a socket
across multiple commands, see [Socket].
- **cmd** is the command requested by the frontend:
- `PVCALLS_SOCKET`: 0
- `PVCALLS_CONNECT`: 1
- `PVCALLS_RELEASE`: 2
- `PVCALLS_BIND`: 3
- `PVCALLS_LISTEN`: 4
- `PVCALLS_ACCEPT`: 5
- `PVCALLS_POLL`: 6
Both fields are echoed back by the backend. See [Socket families and
address format] for the format of the **addr** field of connect and
bind. The maximum size of command specific arguments is 56 bytes. Any
future command that requires more than that will need a bump the
**version** of the protocol.
Similarly to other Xen ring based protocols, after writing a request to
the ring, the frontend calls `RING_PUSH_REQUESTS_AND_CHECK_NOTIFY` and
issues an event channel notification when a notification is required.
Backend responses are allocated on the ring using the `RING_GET_RESPONSE` macro.
The format is the following:
struct xen_pvcalls_response {
uint32_t req_id;
uint32_t cmd;
int32_t ret;
uint32_t pad;
union {
struct _xen_pvcalls_socket {
uint64_t id;
} socket;
struct _xen_pvcalls_connect {
uint64_t id;
} connect;
struct _xen_pvcalls_release {
uint64_t id;
} release;
struct _xen_pvcalls_bind {
uint64_t id;
} bind;
struct _xen_pvcalls_listen {
uint64_t id;
} listen;
struct _xen_pvcalls_accept {
uint64_t id;
} accept;
struct _xen_pvcalls_poll {
uint64_t id;
} poll;
struct _xen_pvcalls_dummy {
uint8_t dummy[8];
} dummy;
} u;
};
The first four fields are common for every response. Their binary layout
is:
0 4 8 12 16
+-------+-------+-------+-------+
|req_id | cmd | ret | pad |
+-------+-------+-------+-------+
- **req_id**: echoed back from request
- **cmd**: echoed back from request
- **ret**: return value, identifies success (0) or failure (see [Error
numbers] in further sections). If the **cmd** is not supported by the
backend, ret is ENOTSUP.
- **pad**: padding
After calling `RING_PUSH_RESPONSES_AND_CHECK_NOTIFY`, the backend checks whether
it needs to notify the frontend and does so via event channel.
A description of each command, their additional request and response
fields follow.
#### Socket
The **socket** operation corresponds to the POSIX [socket][socket]
function. It creates a new socket of the specified family, type and
protocol. **id** is freely chosen by the frontend and references this
specific socket from this point forward. See [Socket families and
address format].
Request fields:
- **cmd** value: 0
- additional fields:
- **id**: generated by the frontend, it identifies the new socket
- **domain**: the communication domain
- **type**: the socket type
- **protocol**: the particular protocol to be used with the socket, usually 0
Request binary layout:
8 12 16 20 24 28
+-------+-------+-------+-------+-------+
| id |domain | type |protoco|
+-------+-------+-------+-------+-------+
Response additional fields:
- **id**: echoed back from request
Response binary layout:
16 20 24
+-------+--------+
| id |
+-------+--------+
Return value:
- 0 on success
- See the [POSIX socket function][connect] for error names; see
[Error numbers] in further sections.
#### Connect
The **connect** operation corresponds to the POSIX [connect][connect]
function. It connects a previously created socket (identified by **id**)
to the specified address.
The connect operation creates a new shared ring, which we'll call **data
ring**. The data ring is used to send and receive data from the
socket. The connect operation passes two additional parameters:
**evtchn** and **ref**. **evtchn** is the port number of a new event
channel which will be used for notifications of activity on the data
ring. **ref** is the grant reference of the **indexes page**: a page
which contains shared indexes that point to the write and read locations
in the data ring. The **indexes page** also contains the full array of
grant references for the data ring. When the frontend issues a
**connect** command, the backend:
- finds its own internal socket corresponding to **id**
- connects the socket to **addr**
- maps the grant reference **ref**, the indexes page, see struct
pvcalls_data_intf
- maps all the grant references listed in `struct pvcalls_data_intf` and
uses them as shared memory for the data ring
- bind the **evtchn**
- replies to the frontend
The [Indexes Page and Data ring] format will be described in the
following section. The data ring is unmapped and freed upon issuing a
**release** command on the active socket identified by **id**. A
frontend stage change can also cause data rings to be unmapped.
Request fields:
- **cmd** value: 0
- additional fields:
- **id**: identifies the socket
- **addr**: address to connect to, see [Socket families and address format]
- **len**: address length
- **flags**: flags for the connection, reserved for future usage
- **ref**: grant reference of the indexes page
- **evtchn**: port number of the evtchn to signal activity on the data ring
Request binary layout:
8 12 16 20 24 28 32 36 40 44
+-------+-------+-------+-------+-------+-------+-------+-------+-------+
| id | addr |
+-------+-------+-------+-------+-------+-------+-------+-------+-------+
| len | flags | ref |evtchn |
+-------+-------+-------+-------+
Response additional fields:
- **id**: echoed back from request
Response binary layout:
16 20 24
+-------+-------+
| id |
+-------+-------+
Return value:
- 0 on success
- See the [POSIX connect function][connect] for error names; see
[Error numbers] in further sections.
#### Release
The **release** operation closes an existing active or a passive socket.
When a release command is issued on a passive socket, the backend
releases it and frees its internal mappings. When a release command is
issued for an active socket, the data ring and indexes page are also
unmapped and freed:
- frontend sends release command for an active socket
- backend releases the socket
- backend unmaps the data ring
- backend unmaps the indexes page
- backend unbinds the event channel
- backend replies to frontend with an **ret** value
- frontend frees data ring, indexes page and unbinds event channel
Request fields:
- **cmd** value: 1
- additional fields:
- **id**: identifies the socket
- **reuse**: an optimization hint for the backend. The field is
ignored for passive sockets. When set to 1, the frontend lets the
backend know that it will reuse exactly the same set of grant pages
(indexes page and data ring) and event channel when creating one of
the next active sockets. The backend can take advantage of it by
delaying unmapping grants and unbinding the event channel. The
backend is free to ignore the hint. Reused data rings are found by
**ref**, the grant reference of the page containing the indexes.
Request binary layout:
8 12 16 17
+-------+-------+-----+
| id |reuse|
+-------+-------+-----+
Response additional fields:
- **id**: echoed back from request
Response binary layout:
16 20 24
+-------+-------+
| id |
+-------+-------+
Return value:
- 0 on success
- See the [POSIX shutdown function][shutdown] for error names; see
[Error numbers] in further sections.
#### Bind
The **bind** operation corresponds to the POSIX [bind][bind] function.
It assigns the address passed as parameter to a previously created
socket, identified by **id**. **Bind**, **listen** and **accept** are
the three operations required to have fully working passive sockets and
should be issued in that order.
Request fields:
- **cmd** value: 2
- additional fields:
- **id**: identifies the socket
- **addr**: address to connect to, see [Socket families and address
format]
- **len**: address length
Request binary layout:
8 12 16 20 24 28 32 36 40 44
+-------+-------+-------+-------+-------+-------+-------+-------+-------+
| id | addr |
+-------+-------+-------+-------+-------+-------+-------+-------+-------+
| len |
+-------+
Response additional fields:
- **id**: echoed back from request
Response binary layout:
16 20 24
+-------+-------+
| id |
+-------+-------+
Return value:
- 0 on success
- See the [POSIX bind function][bind] for error names; see
[Error numbers] in further sections.
#### Listen
The **listen** operation marks the socket as a passive socket. It corresponds to
the [POSIX listen function][listen].
Reuqest fields:
- **cmd** value: 3
- additional fields:
- **id**: identifies the socket
- **backlog**: the maximum length to which the queue of pending
connections may grow in number of elements
Request binary layout:
8 12 16 20
+-------+-------+-------+
| id |backlog|
+-------+-------+-------+
Response additional fields:
- **id**: echoed back from request
Response binary layout:
16 20 24
+-------+-------+
| id |
+-------+-------+
Return value:
- 0 on success
- See the [POSIX listen function][listen] for error names; see
[Error numbers] in further sections.
#### Accept
The **accept** operation extracts the first connection request on the
queue of pending connections for the listening socket identified by
**id** and creates a new connected socket. The id of the new socket is
also chosen by the frontend and passed as an additional field of the
accept request struct (**id_new**). See the [POSIX accept function][accept]
as reference.
Similarly to the **connect** operation, **accept** creates new [Indexes
Page and Data ring]. The data ring is used to send and receive data from
the socket. The **accept** operation passes two additional parameters:
**evtchn** and **ref**. **evtchn** is the port number of a new event
channel which will be used for notifications of activity on the data
ring. **ref** is the grant reference of the **indexes page**: a page
which contains shared indexes that point to the write and read locations
in the data ring. The **indexes page** also contains the full array of
grant references for the data ring.
The backend will reply to the request only when a new connection is
successfully accepted, i.e. the backend does not return EAGAIN or
EWOULDBLOCK.
Example workflow:
- frontend issues an **accept** request
- backend waits for a connection to be available on the socket
- a new connection becomes available
- backend accepts the new connection
- backend creates an internal mapping from **id_new** to the new socket
- backend maps the grant reference **ref**, the indexes page, see struct
pvcalls_data_intf
- backend maps all the grant references listed in `struct
pvcalls_data_intf` and uses them as shared memory for the new data
ring **in** and **out** arrays
- backend binds to the **evtchn**
- backend replies to the frontend with a **ret** value
Request fields:
- **cmd** value: 4
- additional fields:
- **id**: id of listening socket
- **id_new**: id of the new socket
- **ref**: grant reference of the indexes page
- **evtchn**: port number of the evtchn to signal activity on the data ring
Request binary layout:
8 12 16 20 24 28 32
+-------+-------+-------+-------+-------+-------+
| id | id_new | ref |evtchn |
+-------+-------+-------+-------+-------+-------+
Response additional fields:
- **id**: id of the listening socket, echoed back from request
Response binary layout:
16 20 24
+-------+-------+
| id |
+-------+-------+
Return value:
- 0 on success
- See the [POSIX accept function][accept] for error names; see
[Error numbers] in further sections.
#### Poll
In this version of the protocol, the **poll** operation is only valid
for passive sockets. For active sockets, the frontend should look at the
indexes on the **indexes page**. When a new connection is available in
the queue of the passive socket, the backend generates a response and
notifies the frontend.
Request fields:
- **cmd** value: 5
- additional fields:
- **id**: identifies the listening socket
Request binary layout:
8 12 16
+-------+-------+
| id |
+-------+-------+
Response additional fields:
- **id**: echoed back from request
Response binary layout:
16 20 24
+--------+--------+
| id |
+--------+--------+
Return value:
- 0 on success
- See the [POSIX poll function][poll] for error names; see
[Error numbers] in further sections.
#### Error numbers
The numbers corresponding to the error names specified by POSIX are:
[EPERM] -1
[ENOENT] -2
[ESRCH] -3
[EINTR] -4
[EIO] -5
[ENXIO] -6
[E2BIG] -7
[ENOEXEC] -8
[EBADF] -9
[ECHILD] -10
[EAGAIN] -11
[EWOULDBLOCK] -11
[ENOMEM] -12
[EACCES] -13
[EFAULT] -14
[EBUSY] -16
[EEXIST] -17
[EXDEV] -18
[ENODEV] -19
[EISDIR] -21
[EINVAL] -22
[ENFILE] -23
[EMFILE] -24
[ENOSPC] -28
[EROFS] -30
[EMLINK] -31
[EDOM] -33
[ERANGE] -34
[EDEADLK] -35
[EDEADLOCK] -35
[ENAMETOOLONG] -36
[ENOLCK] -37
[ENOTEMPTY] -39
[ENOSYS] -38
[ENODATA] -61
[ETIME] -62
[EBADMSG] -74
[EOVERFLOW] -75
[EILSEQ] -84
[ERESTART] -85
[ENOTSOCK] -88
[EOPNOTSUPP] -95
[EAFNOSUPPORT] -97
[EADDRINUSE] -98
[EADDRNOTAVAIL] -99
[ENOBUFS] -105
[EISCONN] -106
[ENOTCONN] -107
[ETIMEDOUT] -110
[ENOTSUP] -524
#### Socket families and address format
The following definitions and explicit sizes, together with POSIX
[sys/socket.h][address] and [netinet/in.h][in] define socket families and
address format. Please be aware that only the **domain** `AF_INET`, **type**
`SOCK_STREAM` and **protocol** `0` are supported by this version of the
specification, others return ENOTSUP.
#define AF_UNSPEC 0
#define AF_UNIX 1 /* Unix domain sockets */
#define AF_LOCAL 1 /* POSIX name for AF_UNIX */
#define AF_INET 2 /* Internet IP Protocol */
#define AF_INET6 10 /* IP version 6 */
#define SOCK_STREAM 1
#define SOCK_DGRAM 2
#define SOCK_RAW 3
/* generic address format */
struct sockaddr {
uint16_t sa_family_t;
char sa_data[26];
};
struct in_addr {
uint32_t s_addr;
};
/* AF_INET address format */
struct sockaddr_in {
uint16_t sa_family_t;
uint16_t sin_port;
struct in_addr sin_addr;
char sin_zero[20];
};
### Indexes Page and Data ring
Data rings are used for sending and receiving data over a connected socket. They
are created upon a successful **accept** or **connect** command.
The **sendmsg** and **recvmsg** calls are implemented by sending data and
receiving data from a data ring, and updating the corresponding indexes
on the **indexes page**.
Firstly, the **indexes page** is shared by a **connect** or **accept**
command, see **ref** parameter in their sections. The content of the
**indexes page** is represented by `struct pvcalls_ring_intf`, see
below. The structure contains the list of grant references which
constitute the **in** and **out** buffers of the data ring, see ref[]
below. The backend maps the grant references contiguously. Of the
resulting shared memory, the first half is dedicated to the **in** array
and the second half to the **out** array. They are used as circular
buffers for transferring data, and, together, they are the data ring.
+---------------------------+ Indexes page
| Command ring: | +----------------------+
| @0: xen_pvcalls_connect: | |@0 pvcalls_data_intf: |
| @44: ref +-------------------------------->+@76: ring_order = 1 |
| | |@80: ref[0]+ |
+---------------------------+ |@84: ref[1]+ |
| | |
| | |
+----------------------+
|
v (data ring)
+-------+-----------+
| @0->4098: in |
| ref[0] |
|-------------------|
| @4099->8196: out |
| ref[1] |
+-------------------+
#### Indexes Page Structure
typedef uint32_t PVCALLS_RING_IDX;
struct pvcalls_data_intf {
PVCALLS_RING_IDX in_cons, in_prod;
int32_t in_error;
uint8_t pad[52];
PVCALLS_RING_IDX out_cons, out_prod;
int32_t out_error;
uint32_t ring_order;
grant_ref_t ref[];
};
/* not actually C compliant (ring_order changes from socket to socket) */
struct pvcalls_data {
char in[((1<<ring_order)<<PAGE_SHIFT)/2];
char out[((1<<ring_order)<<PAGE_SHIFT)/2];
};
- **ring_order**
It represents the order of the data ring. The following list of grant
references is of `(1 << ring_order)` elements. It cannot be greater than
**max-page-order**, as specified by the backend on XenBus. It has to
be one at minimum.
- **ref[]**
The list of grant references which will contain the actual data. They are
mapped contiguosly in virtual memory. The first half of the pages is the
**in** array, the second half is the **out** array. The arrays must
have a power of two size. Together, their size is `(1 << ring_order) *
PAGE_SIZE`.
- **in** is an array used as circular buffer
It contains data read from the socket. The producer is the backend, the
consumer is the frontend.
- **out** is an array used as circular buffer
It contains data to be written to the socket. The producer is the frontend,
the consumer is the backend.
- **in_cons** and **in_prod**
Consumer and producer indexes for data read from the socket. They keep track
of how much data has already been consumed by the frontend from the **in**
array. **in_prod** is increased by the backend, after writing data to **in**.
**in_cons** is increased by the frontend, after reading data from **in**.
-ring-page-order
**out_cons**, **out_prod**
Cnsumer and producer indexes for the data to be written to the socket. They
keep track of how much data has been written by the frontend to **out** and
how much data has already been consumed by the backend. **out_prod** is
increased by the frontend, after writing data to **out**. **out_cons** is
increased by the backend, after reading data from **out**.
- **in_error** and **out_error** They signal errors when reading from the socket
(**in_error**) or when writing to the socket (**out_error**). 0 means no
errors. When an error occurs, no further reads or writes operations are
performed on the socket. In the case of an orderly socket shutdown (i.e. read
returns 0) **in_error** is set to ENOTCONN. **in_error** and **out_error**
are never set to EAGAIN or EWOULDBLOCK (the data is written to the
ring as soon as it is available).
The binary layout of `struct pvcalls_data_intf` follows:
0 4 8 12 64 68 72 76
+---------+---------+---------+-----//-----+---------+---------+---------+
| in_cons | in_prod |in_error | padding |out_cons |out_prod |out_error|
+---------+---------+---------+-----//-----+---------+---------+---------+
76 80 84 88 4092 4096
+---------+---------+---------+----//---+---------+
|ring_orde| ref[0] | ref[1] | | ref[N] |
+---------+---------+---------+----//---+---------+
**N.B** For one page, N is maximum 1004 ((4096-80)/4), but given that N needs
to be a power of two, actually max N is 512 (ring_order = 9).
#### Data Ring Structure
The binary layout of the data ring follow:
0 ((1<<ring_order)<<PAGE_SHIFT)/2
((1<<ring_order)<<PAGE_SHIFT)
+------------//-------------+------------//-------------+
| in | out |
+------------//-------------+------------//-------------+
#### Workflow
The **in** and **out** arrays are used as circular buffers:
0 sizeof(array) ==
((1<<ring_order)<<PAGE_SHIFT)/2
+-----------------------------------+
|to consume| free |to consume |
+-----------------------------------+
^ ^
prod cons
0 sizeof(array)
+-----------------------------------+
| free | to consume | free |
+-----------------------------------+
^ ^
cons prod
The following function is provided to calculate how many bytes are currently
left unconsumed in an array:
#define _MASK_PVCALLS_IDX(idx, ring_size) ((idx) & (ring_size-1))
static inline PVCALLS_RING_IDX pvcalls_ring_unconsumed(PVCALLS_RING_IDX
prod,
PVCALLS_RING_IDX cons,
PVCALLS_RING_IDX ring_size)
{
PVCALLS_RING_IDX size;
if (prod == cons)
return 0;
prod = _MASK_PVCALLS_IDX(prod, ring_size);
cons = _MASK_PVCALLS_IDX(cons, ring_size);
if (prod == cons)
return ring_size;
if (prod > cons)
size = prod - cons;
else {
size = ring_size - cons;
size += prod;
}
return size;
}
The producer (the backend for **in**, the frontend for **out**) writes to the
array in the following way:
- read *[in|out]_cons*, *[in|out]_prod*, *[in|out]_error* from shared memory
- general memory barrier
- return on *[in|out]_error*
- write to array at position *[in|out]_prod* up to *[in|out]_cons*,
wrapping around the circular buffer when necessary
- write memory barrier
- increase *[in|out]_prod*
- notify the other end via evtchn
The consumer (the backend for **out**, the frontend for **in**) reads from the
array in the following way:
- read *[in|out]_prod*, *[in|out]_cons*, *[in|out]_error* from shared memory
- read memory barrier
- return on *[in|out]_error*
- read from array at position *[in|out]_cons* up to *[in|out]_prod*,
wrapping around the circular buffer when necessary
- general memory barrier
- increase *[in|out]_cons*
- notify the other end via evtchn
The producer takes care of writing only as many bytes as available in
the buffer up to *[in|out]_cons*. The consumer takes care of reading
only as many bytes as available in the buffer up to *[in|out]_prod*.
*[in|out]_error* is set by the backend when an error occurs writing or
reading from the socket.
[xenstore]: http://xenbits.xen.org/docs/unstable/misc/xenstore.txt
[XenbusStateInitialising]:
http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
[address]: http://pubs.opengroup.org/onlinepubs/7908799/xns/syssocket.h.html
[in]: http://pubs.opengroup.org/onlinepubs/000095399/basedefs/netinet/in.h.html
[socket]: http://pubs.opengroup.org/onlinepubs/009695399/functions/socket.html
[connect]: http://pubs.opengroup.org/onlinepubs/7908799/xns/connect.html
[shutdown]: http://pubs.opengroup.org/onlinepubs/7908799/xns/shutdown.html
[bind]: http://pubs.opengroup.org/onlinepubs/7908799/xns/bind.html
[listen]: http://pubs.opengroup.org/onlinepubs/7908799/xns/listen.html
[accept]: http://pubs.opengroup.org/onlinepubs/7908799/xns/accept.html
[poll]: http://pubs.opengroup.org/onlinepubs/7908799/xsh/poll.html
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |