|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v13 3/9] efi: create new early memory allocator
There is a problem with place_string() which is used as early memory
allocator. It gets memory chunks starting from start symbol and goes
down. Sadly this does not work when Xen is loaded using multiboot2
protocol because then the start lives on 1 MiB address and we should
not allocate a memory from below of it. So, I tried to use mem_lower
address calculated by GRUB2. However, this solution works only on some
machines. There are machines in the wild (e.g. Dell PowerEdge R820)
which uses first ~640 KiB for boot services code or data... :-(((
Hence, we need new memory allocator for Xen EFI boot code which is
quite simple and generic and could be used by place_string() and
efi_arch_allocate_mmap_buffer(). I think about following solutions:
1) We could use native EFI allocation functions (e.g. AllocatePool()
or AllocatePages()) to get memory chunk. However, later (somewhere
in __start_xen()) we must copy its contents to safe place or reserve
it in e820 memory map and map it in Xen virtual address space. This
means that the code referring to Xen command line, loaded modules and
EFI memory map, mostly in __start_xen(), will be further complicated
and diverge from legacy BIOS cases. Additionally, both former things
have to be placed below 4 GiB because their addresses are stored in
multiboot_info_t structure which has 32-bit relevant members.
2) We may allocate memory area statically somewhere in Xen code which
could be used as memory pool for early dynamic allocations. Looks
quite simple. Additionally, it would not depend on EFI at all and
could be used on legacy BIOS platforms if we need it. However, we
must carefully choose size of this pool. We do not want increase Xen
binary size too much and waste too much memory but also we must fit
at least memory map on x86 EFI platforms. As I saw on small machine,
e.g. IBM System x3550 M2 with 8 GiB RAM, memory map may contain more
than 200 entries. Every entry on x86-64 platform is 40 bytes in size.
So, it means that we need more than 8 KiB for EFI memory map only.
Additionally, if we use this memory pool for Xen and modules command
line storage (it would be used when xen.efi is executed as EFI application)
then we should add, I think, about 1 KiB. In this case, to be on safe
side, we should assume at least 64 KiB pool for early memory allocations.
Which is about 4 times of our earlier calculations. However, during
discussion on Xen-devel Jan Beulich suggested that just in case we should
use 1 MiB memory pool like it is in original place_string() implementation.
So, let's use 1 MiB as it was proposed. If we think that we should not
waste unallocated memory in the pool on running system then we can mark
this region as __initdata and move all required data to dynamically
allocated places somewhere in __start_xen().
2a) We could put memory pool into .bss.page_aligned section. Then allocate
memory chunks starting from the lowest address. After init phase we can
free unused portion of the memory pool as in case of .init.text or
.init.data
sections. This way we do not need to allocate any space in image file and
freeing of unused area in the memory pool is very simple.
Now #2a solution is implemented because it is quite simple and requires
limited number of changes, especially in __start_xen().
New allocator is quite generic and can be used on ARM platforms too.
Though it is not enabled on ARM yet due to lack of some prereq.
List of them is placed before ebmalloc code.
Signed-off-by: Daniel Kiper <daniel.kiper@xxxxxxxxxx>
Acked-by: Jan Beulich <jbeulich@xxxxxxxx>
Acked-by: Julien Grall <julien.grall@xxxxxxx>
Reviewed-by: Doug Goldstein <cardoe@xxxxxxxxxx>
Tested-by: Doug Goldstein <cardoe@xxxxxxxxxx>
---
v11 - suggestions/fixes:
- #ifdef only EBMALLOC_SIZE from ebmalloc machinery
(suggested by Jan Beulich).
v10 - suggestions/fixes:
- remove unneeded ARM free_ebmalloc_unused_mem() stub.
v9 - suggestions/fixes:
- call free_ebmalloc_unused_mem() from efi_init_memory()
instead of xen/arch/arm/setup.c:init_done()
(suggested by Jan Beulich),
- improve comments.
v8 - suggestions/fixes:
- disable whole ebmalloc machinery on ARM platforms,
- add comment saying what should be done before
enabling ebmalloc on ARM,
(suggested by Julien Grall),
- move ebmalloc code before efi-boot.h inclusion and
remove unneeded forward declaration
(suggested by Jan Beulich),
- remove free_ebmalloc_unused_mem() call from
xen/arch/arm/setup.c:init_done()
(suggested by Julien Grall),
- improve commit message.
v7 - suggestions/fixes:
- enable most of ebmalloc machinery on ARM platforms
(suggested by Jan Beulich),
- remove unneeded cast
(suggested by Jan Beulich),
- wrap long line
(suggested by Jan Beulich),
- improve commit message.
v6 - suggestions/fixes:
- optimize ebmalloc allocator,
- move ebmalloc machinery to xen/common/efi/boot.c
(suggested by Jan Beulich),
- enforce PAGE_SIZE ebmalloc_mem alignment
(suggested by Jan Beulich),
- ebmalloc() must allocate properly
aligned memory regions
(suggested by Jan Beulich),
- printk() should use XENLOG_INFO
(suggested by Jan Beulich).
v4 - suggestions/fixes:
- move from #2 solution to #2a solution,
- improve commit message.
---
xen/arch/x86/efi/efi-boot.h | 11 +++-------
xen/arch/x86/setup.c | 3 +--
xen/common/efi/boot.c | 50 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 54 insertions(+), 10 deletions(-)
diff --git a/xen/arch/x86/efi/efi-boot.h b/xen/arch/x86/efi/efi-boot.h
index 388c4ea..62c010e 100644
--- a/xen/arch/x86/efi/efi-boot.h
+++ b/xen/arch/x86/efi/efi-boot.h
@@ -114,7 +114,7 @@ static void __init relocate_trampoline(unsigned long phys)
static void __init place_string(u32 *addr, const char *s)
{
- static char *__initdata alloc = start;
+ char *alloc = NULL;
if ( s && *s )
{
@@ -122,7 +122,7 @@ static void __init place_string(u32 *addr, const char *s)
const char *old = (char *)(long)*addr;
size_t len2 = *addr ? strlen(old) + 1 : 0;
- alloc -= len1 + len2;
+ alloc = ebmalloc(len1 + len2);
/*
* Insert new string before already existing one. This is needed
* for options passed on the command line to override options from
@@ -205,12 +205,7 @@ static void __init
efi_arch_process_memory_map(EFI_SYSTEM_TABLE *SystemTable,
static void *__init efi_arch_allocate_mmap_buffer(UINTN map_size)
{
- place_string(&mbi.mem_upper, NULL);
- mbi.mem_upper -= map_size;
- mbi.mem_upper &= -__alignof__(EFI_MEMORY_DESCRIPTOR);
- if ( mbi.mem_upper < xen_phys_start )
- return NULL;
- return (void *)(long)mbi.mem_upper;
+ return ebmalloc(map_size);
}
static void __init efi_arch_pre_exit_boot(void)
diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index 0ccef1d..d4b7d25 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -1124,8 +1124,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)
if ( !xen_phys_start )
panic("Not enough memory to relocate Xen.");
- reserve_e820_ram(&boot_e820, efi_enabled(EFI_LOADER) ? mbi->mem_upper :
__pa(&_start),
- __pa(&_end));
+ reserve_e820_ram(&boot_e820, __pa(&_start), __pa(&_end));
/* Late kexec reservation (dynamic start address). */
kexec_reserve_area(&boot_e820);
diff --git a/xen/common/efi/boot.c b/xen/common/efi/boot.c
index df8c702..36dbb71 100644
--- a/xen/common/efi/boot.c
+++ b/xen/common/efi/boot.c
@@ -98,6 +98,54 @@ static CHAR16 __initdata newline[] = L"\r\n";
#define PrintStr(s) StdOut->OutputString(StdOut, s)
#define PrintErr(s) StdErr->OutputString(StdErr, s)
+#ifdef CONFIG_ARM
+/*
+ * TODO: Enable EFI boot allocator on ARM.
+ * This code can be common for x86 and ARM.
+ * Things TODO on ARM before enabling ebmalloc:
+ * - estimate required EBMALLOC_SIZE value,
+ * - where (in which section) ebmalloc_mem[] should live; if in
+ * .bss.page_aligned, as it is right now, then whole BSS zeroing
+ * have to be disabled in xen/arch/arm/arm64/head.S; though BSS
+ * should be initialized somehow before use of variables living there,
+ * - use ebmalloc() in ARM/common EFI boot code,
+ * - call free_ebmalloc_unused_mem() somewhere in init code.
+ */
+#define EBMALLOC_SIZE MB(0)
+#else
+#define EBMALLOC_SIZE MB(1)
+#endif
+
+static char __section(".bss.page_aligned") __aligned(PAGE_SIZE)
+ ebmalloc_mem[EBMALLOC_SIZE];
+static unsigned long __initdata ebmalloc_allocated;
+
+/* EFI boot allocator. */
+static void __init __maybe_unused *ebmalloc(size_t size)
+{
+ void *ptr = ebmalloc_mem + ebmalloc_allocated;
+
+ ebmalloc_allocated += (size + sizeof(void *) - 1) & ~(sizeof(void *) - 1);
+
+ if ( ebmalloc_allocated > sizeof(ebmalloc_mem) )
+ blexit(L"Out of static memory\r\n");
+
+ return ptr;
+}
+
+static void __init __maybe_unused free_ebmalloc_unused_mem(void)
+{
+ unsigned long start, end;
+
+ start = (unsigned long)ebmalloc_mem + PAGE_ALIGN(ebmalloc_allocated);
+ end = (unsigned long)ebmalloc_mem + sizeof(ebmalloc_mem);
+
+ destroy_xen_mappings(start, end);
+ init_xenheap_pages(__pa(start), __pa(end));
+
+ printk(XENLOG_INFO "Freed %lukB unused BSS memory\n", (end - start) >> 10);
+}
+
/*
* Include architecture specific implementation here, which references the
* static globals defined above.
@@ -1251,6 +1299,8 @@ void __init efi_init_memory(void)
} *extra, *extra_head = NULL;
#endif
+ free_ebmalloc_unused_mem();
+
if ( !efi_enabled(EFI_BOOT) )
return;
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |