|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v13 4/9] x86: add multiboot2 protocol support for EFI platforms
This way Xen can be loaded on EFI platforms using GRUB2 and
other boot loaders which support multiboot2 protocol.
Signed-off-by: Daniel Kiper <daniel.kiper@xxxxxxxxxx>
---
v13 - suggestions/fixes:
- move vga_text_buffer and efi_platform to .init.data section
(suggested by Jan Beulich),
- reduce number of error branches in EFI code in xen/arch/x86/boot/head.S
(suggested by Jan Beulich),
- rename run_bs label to .Lrun_bs
(suggested by Jan Beulich),
- align the stack as UEFI spec requires
(suggested by Jan Beulich),
- change trampoline region memory layout
(suggested by Jan Beulich),
- revert changes in efi_arch_pre_exit_boot()
(suggested by Jan Beulich),
- relocate_trampoline() must set trampoline_phys for all bootloaders;
otherwise fallback allocator is always used if Xen was loaded with
Multiboot2 protocol,
- change err type in efi_multiboot2() to "static const CHAR16 __initconst"
(suggested by Jan Beulich),
- change asm "g" constraint to "rm" in efi_multiboot2()
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich and Doug Goldstein).
v12 - suggestions/fixes:
- rename __efi64_start to __efi64_mb2_start
(suggested by Andrew Cooper),
- use efi_arch_memory_setup() machinery as trampoline
et consortes main memory allocator
(suggested by Doug Goldstein),
- allocate space for mbi struct in efi_arch_memory_setup() too;
this thing was not taken into account in earlier releases,
- revert trampoline et consortes fallback memory allocator code
in efi_arch_process_memory_map() to current upstream state
(suggested by Doug Goldstein),
- further simplify efi_arch_pre_exit_boot() code,
- call efi_arch_memory_setup() from efi_multiboot2()
(suggested by Doug Goldstein),
- fix asembly call argument in xen/arch/x86/efi/stub.c
(suggested by Andrew Cooper),
- add ASSERT() for trampoline size
(suggested by Doug Goldstein),
- add KB() macro
(suggested by Doug Goldstein),
- improve comments
(suggested by Andrew Cooper and Doug Goldstein).
v10 - suggestions/fixes:
- replace ljmpl with lretq
(suggested by Andrew Cooper),
- introduce efi_platform to increase code readability
(suggested by Andrew Cooper).
v9 - suggestions/fixes:
- use .L labels instead of numeric ones in multiboot2 data scanning loops
(suggested by Jan Beulich).
v8 - suggestions/fixes:
- use __bss_start(%rip)/__bss_end(%rip) instead of
of .startof.(.bss)(%rip)/$.sizeof.(.bss) because
latter is not tested extensively in different
built environments yet
(suggested by Andrew Cooper),
- fix multiboot2 data scanning loop in x86_32 code
(suggested by Jan Beulich),
- add check for extra mem for mbi data if Xen is loaded
via multiboot2 protocol on EFI platform
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich).
v7 - suggestions/fixes:
- do not allocate twice memory for trampoline if we were
loaded via multiboot2 protocol on EFI platform,
- wrap long line
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich).
v6 - suggestions/fixes:
- improve label names in assembly
error printing code
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich),
- various minor cleanups and fixes
(suggested by Jan Beulich).
v4 - suggestions/fixes:
- remove redundant BSS alignment,
- update BSS alignment check,
- use __set_bit() instead of set_bit() if possible
(suggested by Jan Beulich),
- call efi_arch_cpu() from efi_multiboot2()
even if the same work is done later in
other place right now
(suggested by Jan Beulich),
- xen/arch/x86/efi/stub.c:efi_multiboot2()
fail properly on EFI platforms,
- do not read data beyond the end of multiboot2
information in xen/arch/x86/boot/head.S
(suggested by Jan Beulich),
- use 32-bit registers in x86_64 code if possible
(suggested by Jan Beulich),
- multiboot2 information address is 64-bit
in x86_64 code, so, treat it is as is
(suggested by Jan Beulich),
- use cmovcc if possible,
- leave only one space between rep and stosq
(suggested by Jan Beulich),
- improve error handling,
- improve early error messages,
(suggested by Jan Beulich),
- improve early error messages printing code,
- improve label names
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich),
- various minor cleanups.
v3 - suggestions/fixes:
- take into account alignment when skipping multiboot2 fixed part
(suggested by Konrad Rzeszutek Wilk),
- improve segment registers initialization
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich and Konrad Rzeszutek Wilk),
- improve commit message
(suggested by Jan Beulich).
v2 - suggestions/fixes:
- generate multiboot2 header using macros
(suggested by Jan Beulich),
- switch CPU to x86_32 mode before
jumping to 32-bit code
(suggested by Andrew Cooper),
- reduce code changes to increase patch readability
(suggested by Jan Beulich),
- improve comments
(suggested by Jan Beulich),
- ignore MULTIBOOT2_TAG_TYPE_BASIC_MEMINFO tag on EFI platform
and find on my own multiboot2.mem_lower value,
- stop execution if EFI platform is detected
in legacy BIOS path.
---
xen/arch/x86/boot/head.S | 297 ++++++++++++++++++++++++++++++++++---
xen/arch/x86/boot/reloc.c | 2 +-
xen/arch/x86/efi/efi-boot.h | 52 ++++++-
xen/arch/x86/efi/stub.c | 39 +++++
xen/arch/x86/x86_64/asm-offsets.c | 2 +
xen/arch/x86/xen.lds.S | 7 +-
xen/common/efi/boot.c | 11 ++
xen/include/asm-x86/config.h | 3 +
xen/include/xen/config.h | 1 +
9 files changed, 391 insertions(+), 23 deletions(-)
diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
index 84cf44d..2ecdcb3 100644
--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -89,6 +89,13 @@ multiboot2_header_start:
0, /* Number of the lines - no preference. */ \
0 /* Number of bits per pixel - no preference. */
+ /* Request that ExitBootServices() not be called. */
+ mb2ht_init MB2_HT(EFI_BS), MB2_HT(OPTIONAL)
+
+ /* EFI64 Multiboot2 entry point. */
+ mb2ht_init MB2_HT(ENTRY_ADDRESS_EFI64), MB2_HT(OPTIONAL), \
+ sym_phys(__efi64_mb2_start)
+
/* Multiboot2 header end tag. */
mb2ht_init MB2_HT(END), MB2_HT(REQUIRED)
.Lmultiboot2_header_end:
@@ -100,20 +107,50 @@ multiboot2_header_start:
gdt_boot_descr:
.word 6*8-1
.long sym_phys(trampoline_gdt)
+ .long 0 /* Needed for 64-bit lgdt */
.Lbad_cpu_msg: .asciz "ERR: Not a 64-bit CPU!"
.Lbad_ldr_msg: .asciz "ERR: Not a Multiboot bootloader!"
+.Lbad_ldr_nbs: .asciz "ERR: Bootloader shutdown EFI x64 boot services!"
+.Lbad_ldr_nst: .asciz "ERR: EFI SystemTable is not provided by bootloader!"
+.Lbad_ldr_nih: .asciz "ERR: EFI ImageHandle is not provided by bootloader!"
+.Lbad_efi_msg: .asciz "ERR: EFI IA-32 platforms are not supported!"
+
+ .section .init.data, "a", @progbits
+ .align 4
+
+vga_text_buffer:
+ .long 0xb8000
+
+efi_platform:
+ .byte 0
.section .init.text, "ax", @progbits
bad_cpu:
mov $(sym_phys(.Lbad_cpu_msg)),%esi # Error message
- jmp print_err
+ jmp .Lget_vtb
not_multiboot:
mov $(sym_phys(.Lbad_ldr_msg)),%esi # Error message
-print_err:
- mov $0xB8000,%edi # VGA framebuffer
-1: mov (%esi),%bl
+ jmp .Lget_vtb
+.Lmb2_no_st:
+ mov $(sym_phys(.Lbad_ldr_nst)),%esi # Error message
+ jmp .Lget_vtb
+.Lmb2_no_ih:
+ mov $(sym_phys(.Lbad_ldr_nih)),%esi # Error message
+ jmp .Lget_vtb
+.Lmb2_no_bs:
+ mov $(sym_phys(.Lbad_ldr_nbs)),%esi # Error message
+ xor %edi,%edi # No VGA text buffer
+ jmp .Lsend_chr
+.Lmb2_efi_ia_32:
+ mov $(sym_phys(.Lbad_efi_msg)),%esi # Error message
+ xor %edi,%edi # No VGA text buffer
+ jmp .Lsend_chr
+.Lget_vtb:
+ mov sym_phys(vga_text_buffer),%edi
+.Lsend_chr:
+ mov (%esi),%bl
test %bl,%bl # Terminate on '\0' sentinel
je .Lhalt
mov $0x3f8+5,%dx # UART Line Status Register
@@ -123,13 +160,193 @@ print_err:
mov $0x3f8+0,%dx # UART Transmit Holding Register
mov %bl,%al
out %al,%dx # Send a character over the serial line
- movsb # Write a character to the VGA framebuffer
+ test %edi,%edi # Is the VGA text buffer available?
+ jz .Lsend_chr
+ movsb # Write a character to the VGA text buffer
mov $7,%al
- stosb # Write an attribute to the VGA framebuffer
- jmp 1b
+ stosb # Write an attribute to the VGA text buffer
+ jmp .Lsend_chr
.Lhalt: hlt
jmp .Lhalt
+ .code64
+
+__efi64_mb2_start:
+ /*
+ * Multiboot2 spec says that here CPU is in 64-bit mode. However, there
+ * is also guarantee that all code and data is always put by the
bootloader
+ * below 4 GiB. Hence, we can safely use in most cases 32-bit
addressing.
+ */
+
+ cld
+
+ /* VGA is not available on EFI platforms. */
+ movl $0,vga_text_buffer(%rip)
+
+ /* Check for Multiboot2 bootloader. */
+ cmp $MULTIBOOT2_BOOTLOADER_MAGIC,%eax
+ je .Lefi_multiboot2_proto
+
+ /* Jump to not_multiboot after switching CPU to x86_32 mode. */
+ lea not_multiboot(%rip),%r15d
+ jmp x86_32_switch
+
+.Lefi_multiboot2_proto:
+ /* Zero EFI SystemTable and EFI ImageHandle addresses. */
+ xor %esi,%esi
+ xor %edi,%edi
+
+ /* Skip Multiboot2 information fixed part. */
+ lea (MB2_fixed_sizeof+MULTIBOOT2_TAG_ALIGN-1)(%rbx),%ecx
+ and $~(MULTIBOOT2_TAG_ALIGN-1),%ecx
+
+.Lefi_mb2_tsize:
+ /* Check Multiboot2 information total size. */
+ mov %ecx,%r8d
+ sub %ebx,%r8d
+ cmp %r8d,MB2_fixed_total_size(%rbx)
+ jbe .Lrun_bs
+
+ /* Are EFI boot services available? */
+ cmpl $MULTIBOOT2_TAG_TYPE_EFI_BS,MB2_tag_type(%rcx)
+ jne .Lefi_mb2_st
+
+ /* We are on EFI platform and EFI boot services are available. */
+ incb efi_platform(%rip)
+
+ /*
+ * Disable real mode and other legacy stuff which should not
+ * be run on EFI platforms.
+ */
+ incb skip_realmode(%rip)
+ jmp .Lefi_mb2_next_tag
+
+.Lefi_mb2_st:
+ /* Get EFI SystemTable address from Multiboot2 information. */
+ cmpl $MULTIBOOT2_TAG_TYPE_EFI64,MB2_tag_type(%rcx)
+ cmove MB2_efi64_st(%rcx),%rsi
+ je .Lefi_mb2_next_tag
+
+ /* Get EFI ImageHandle address from Multiboot2 information. */
+ cmpl $MULTIBOOT2_TAG_TYPE_EFI64_IH,MB2_tag_type(%rcx)
+ cmove MB2_efi64_ih(%rcx),%rdi
+ je .Lefi_mb2_next_tag
+
+ /* Is it the end of Multiboot2 information? */
+ cmpl $MULTIBOOT2_TAG_TYPE_END,MB2_tag_type(%rcx)
+ je .Lrun_bs
+
+.Lefi_mb2_next_tag:
+ /* Go to next Multiboot2 information tag. */
+ add MB2_tag_size(%rcx),%ecx
+ add $(MULTIBOOT2_TAG_ALIGN-1),%ecx
+ and $~(MULTIBOOT2_TAG_ALIGN-1),%ecx
+ jmp .Lefi_mb2_tsize
+
+.Lrun_bs:
+ /* Are EFI boot services available? */
+ cmpb $0,efi_platform(%rip)
+
+ /* Jump to .Lmb2_no_bs after switching CPU to x86_32 mode. */
+ lea .Lmb2_no_bs(%rip),%r15d
+ jz x86_32_switch
+
+ /* Is EFI SystemTable address provided by boot loader? */
+ test %rsi,%rsi
+
+ /* Jump to .Lmb2_no_st after switching CPU to x86_32 mode. */
+ lea .Lmb2_no_st(%rip),%r15d
+ jz x86_32_switch
+
+ /* Is EFI ImageHandle address provided by boot loader? */
+ test %rdi,%rdi
+
+ /* Jump to .Lmb2_no_ih after switching CPU to x86_32 mode. */
+ lea .Lmb2_no_ih(%rip),%r15d
+ jz x86_32_switch
+
+ /* Align the stack as UEFI spec requires. */
+ add $15,%rsp
+ and $~15,%rsp
+
+ push %rax
+ push %rdi
+
+ /*
+ * Initialize BSS (no nasty surprises!).
+ * It must be done earlier than in BIOS case
+ * because efi_multiboot2() touches it.
+ */
+ lea __bss_start(%rip),%edi
+ lea __bss_end(%rip),%ecx
+ sub %edi,%ecx
+ shr $3,%ecx
+ xor %eax,%eax
+ rep stosq
+
+ pop %rdi
+
+ /* Align the stack as UEFI spec requires. */
+ push %rdi
+
+ /*
+ * efi_multiboot2() is called according to System V AMD64 ABI:
+ * - IN: %rdi - EFI ImageHandle, %rsi - EFI SystemTable,
+ * - OUT: %rax - trampoline address.
+ *
+ * MULTIBOOT2_TAG_TYPE_BASIC_MEMINFO tag is not provided
+ * on EFI platforms. Hence, it could not be used like
+ * on legacy BIOS platforms.
+ */
+ call efi_multiboot2
+
+ /* Convert memory address to bytes/16 and store it in safe place. */
+ shr $4,%eax
+ mov %eax,%ecx
+
+ pop %rdi
+ pop %rax
+
+ /* Jump to trampoline_setup after switching CPU to x86_32 mode. */
+ lea trampoline_setup(%rip),%r15d
+
+x86_32_switch:
+ mov %r15d,%edi
+
+ cli
+
+ /* Initialize GDTR. */
+ lgdt gdt_boot_descr(%rip)
+
+ /* Reload code selector. */
+ pushq $BOOT_CS32
+ lea cs32_switch(%rip),%edx
+ push %rdx
+ lretq
+
+ .code32
+
+cs32_switch:
+ /* Initialize basic data segments. */
+ mov $BOOT_DS,%edx
+ mov %edx,%ds
+ mov %edx,%es
+ mov %edx,%ss
+ /* %esp is initialized later. */
+
+ /* Load null descriptor to unused segment registers. */
+ xor %edx,%edx
+ mov %edx,%fs
+ mov %edx,%gs
+
+ /* Disable paging. */
+ mov %cr0,%edx
+ and $(~X86_CR0_PG),%edx
+ mov %edx,%cr0
+
+ /* Jump to earlier loaded address. */
+ jmp *%edi
+
__start:
cld
cli
@@ -157,7 +374,7 @@ __start:
/* Not available? BDA value will be fine. */
cmovnz MB_mem_lower(%ebx),%edx
- jmp trampoline_setup
+ jmp trampoline_bios_setup
.Lmultiboot2_proto:
/* Skip Multiboot2 information fixed part. */
@@ -169,24 +386,33 @@ __start:
mov %ecx,%edi
sub %ebx,%edi
cmp %edi,MB2_fixed_total_size(%ebx)
- jbe trampoline_setup
+ jbe trampoline_bios_setup
/* Get mem_lower from Multiboot2 information. */
cmpl $MULTIBOOT2_TAG_TYPE_BASIC_MEMINFO,MB2_tag_type(%ecx)
cmove MB2_mem_lower(%ecx),%edx
- je trampoline_setup
+ je .Lmb2_next_tag
+
+ /* EFI IA-32 platforms are not supported. */
+ cmpl $MULTIBOOT2_TAG_TYPE_EFI32,MB2_tag_type(%ecx)
+ je .Lmb2_efi_ia_32
+
+ /* Bootloader shutdown EFI x64 boot services. */
+ cmpl $MULTIBOOT2_TAG_TYPE_EFI64,MB2_tag_type(%ecx)
+ je .Lmb2_no_bs
/* Is it the end of Multiboot2 information? */
cmpl $MULTIBOOT2_TAG_TYPE_END,MB2_tag_type(%ecx)
- je trampoline_setup
+ je trampoline_bios_setup
+.Lmb2_next_tag:
/* Go to next Multiboot2 information tag. */
add MB2_tag_size(%ecx),%ecx
add $(MULTIBOOT2_TAG_ALIGN-1),%ecx
and $~(MULTIBOOT2_TAG_ALIGN-1),%ecx
jmp .Lmb2_tsize
-trampoline_setup:
+trampoline_bios_setup:
/* Set up trampoline segment 64k below EBDA */
movzwl 0x40e,%ecx /* EBDA segment */
cmp $0xa000,%ecx /* sanity check (high) */
@@ -202,28 +428,56 @@ trampoline_setup:
* multiboot structure (if available) and use the smallest.
*/
cmp $0x100,%edx /* is the multiboot value too small? */
- jb 2f /* if so, do not use it */
+ jb trampoline_setup /* if so, do not use it */
shl $10-4,%edx
cmp %ecx,%edx /* compare with BDA value */
cmovb %edx,%ecx /* and use the smaller */
-2: /* Reserve 64kb for the trampoline */
- sub $0x1000,%ecx
+ /* Reserve memory for the trampoline and the low-memory stack. */
+ sub $((TRAMPOLINE_SPACE+TRAMPOLINE_STACK_SPACE)>>4),%ecx
/* From arch/x86/smpboot.c: start_eip had better be page-aligned! */
xor %cl, %cl
+
+trampoline_setup:
shl $4, %ecx
mov %ecx,sym_phys(trampoline_phys)
+ /* Get topmost low-memory stack address. */
+ add $TRAMPOLINE_SPACE,%ecx
+
/* Save the Multiboot info struct (after relocation) for later use. */
mov $sym_phys(cpu0_stack)+1024,%esp
- push %ecx /* Boot trampoline address. */
+ push %ecx /* Topmost low-memory stack address. */
push %ebx /* Multiboot information address. */
push %eax /* Multiboot magic. */
call reloc
mov %eax,sym_phys(multiboot_ptr)
- /* Initialize BSS (no nasty surprises!) */
+ /*
+ * Now trampoline_phys points to the following structure (lowest
+ * address is at the top):
+ *
+ * +------------------------+
+ * | TRAMPOLINE_SPACE |
+ * +- - - - - - - - - - - - +
+ * | mbi struct |
+ * +------------------------+
+ * | TRAMPOLINE_STACK_SPACE |
+ * +------------------------+
+ *
+ * mbi struct lives at the end of TRAMPOLINE_SPACE. The rest of
+ * TRAMPOLINE_SPACE is reserved for trampoline code and data.
+ */
+
+ /*
+ * Do not zero BSS on EFI platform here.
+ * It was initialized earlier.
+ */
+ cmpb $0,sym_phys(efi_platform)
+ jnz 1f
+
+ /* Initialize BSS (no nasty surprises!). */
mov $sym_phys(__bss_start),%edi
mov $sym_phys(__bss_end),%ecx
sub %edi,%ecx
@@ -231,6 +485,7 @@ trampoline_setup:
shr $2,%ecx
rep stosl
+1:
/* Interrogate CPU extended features via CPUID. */
mov $0x80000000,%eax
cpuid
@@ -282,6 +537,10 @@ trampoline_setup:
cmp $sym_phys(__trampoline_seg_stop),%edi
jb 1b
+ /* Do not parse command line on EFI platform here. */
+ cmpb $0,sym_phys(efi_platform)
+ jnz 1f
+
/* Bail if there is no command line to parse. */
mov sym_phys(multiboot_ptr),%ebx
testl $MBI_CMDLINE,MB_flags(%ebx)
@@ -292,9 +551,9 @@ trampoline_setup:
call cmdline_parse_early
1:
- /* Switch to low-memory stack. */
+ /* Switch to low-memory stack which lives at the end of trampoline
region. */
mov sym_phys(trampoline_phys),%edi
- lea 0x10000(%edi),%esp
+ lea TRAMPOLINE_SPACE+TRAMPOLINE_STACK_SPACE(%edi),%esp
lea trampoline_boot_cpu_entry-trampoline_start(%edi),%eax
pushl $BOOT_CS32
push %eax
diff --git a/xen/arch/x86/boot/reloc.c b/xen/arch/x86/boot/reloc.c
index 91fab9d..b992678 100644
--- a/xen/arch/x86/boot/reloc.c
+++ b/xen/arch/x86/boot/reloc.c
@@ -16,7 +16,7 @@
* This entry point is entered from xen/arch/x86/boot/head.S with:
* - 0x4(%esp) = MULTIBOOT_MAGIC,
* - 0x8(%esp) = MULTIBOOT_INFORMATION_ADDRESS,
- * - 0xc(%esp) = BOOT_TRAMPOLINE_ADDRESS.
+ * - 0xc(%esp) = TOPMOST_LOW_MEMORY_STACK_ADDRESS.
*/
asm (
" .text \n"
diff --git a/xen/arch/x86/efi/efi-boot.h b/xen/arch/x86/efi/efi-boot.h
index 62c010e..d193847 100644
--- a/xen/arch/x86/efi/efi-boot.h
+++ b/xen/arch/x86/efi/efi-boot.h
@@ -101,6 +101,10 @@ static void __init relocate_trampoline(unsigned long phys)
const s32 *trampoline_ptr;
trampoline_phys = phys;
+
+ if ( !efi_enabled(EFI_LOADER) )
+ return;
+
/* Apply relocations to trampoline. */
for ( trampoline_ptr = __trampoline_rel_start;
trampoline_ptr < __trampoline_rel_stop;
@@ -550,7 +554,12 @@ static void __init efi_arch_memory_setup(void)
/* Allocate space for trampoline (in first Mb). */
cfg.addr = 0x100000;
- cfg.size = trampoline_end - trampoline_start;
+
+ if ( efi_enabled(EFI_LOADER) )
+ cfg.size = trampoline_end - trampoline_start;
+ else
+ cfg.size = TRAMPOLINE_SPACE + TRAMPOLINE_STACK_SPACE;
+
status = efi_bs->AllocatePages(AllocateMaxAddress, EfiLoaderData,
PFN_UP(cfg.size), &cfg.addr);
if ( status == EFI_SUCCESS )
@@ -561,6 +570,9 @@ static void __init efi_arch_memory_setup(void)
PrintStr(L"Trampoline space cannot be allocated; will try
fallback.\r\n");
}
+ if ( !efi_enabled(EFI_LOADER) )
+ return;
+
/* Initialise L2 identity-map and boot-map page table entries (16MB). */
for ( i = 0; i < 8; ++i )
{
@@ -653,6 +665,44 @@ static bool_t __init
efi_arch_use_config_file(EFI_SYSTEM_TABLE *SystemTable)
static void efi_arch_flush_dcache_area(const void *vaddr, UINTN size) { }
+paddr_t __init efi_multiboot2(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE
*SystemTable)
+{
+ EFI_GRAPHICS_OUTPUT_PROTOCOL *gop;
+ UINTN cols, gop_mode = ~0, rows;
+
+ __set_bit(EFI_BOOT, &efi_flags);
+ __set_bit(EFI_RS, &efi_flags);
+
+ efi_init(ImageHandle, SystemTable);
+
+ efi_console_set_mode();
+
+ if ( StdOut->QueryMode(StdOut, StdOut->Mode->Mode,
+ &cols, &rows) == EFI_SUCCESS )
+ efi_arch_console_init(cols, rows);
+
+ gop = efi_get_gop();
+
+ if ( gop )
+ gop_mode = efi_find_gop_mode(gop, 0, 0, 0);
+
+ efi_arch_edd();
+ efi_arch_cpu();
+
+ efi_tables();
+ setup_efi_pci();
+ efi_variables();
+ efi_arch_memory_setup();
+
+ if ( gop )
+ efi_set_gop_mode(gop, gop_mode);
+
+ efi_exit_boot(ImageHandle, SystemTable);
+
+ /* Return trampoline address. */
+ return trampoline_phys;
+}
+
/*
* Local variables:
* mode: C
diff --git a/xen/arch/x86/efi/stub.c b/xen/arch/x86/efi/stub.c
index 4158124..8df9ba2 100644
--- a/xen/arch/x86/efi/stub.c
+++ b/xen/arch/x86/efi/stub.c
@@ -3,6 +3,45 @@
#include <xen/init.h>
#include <xen/lib.h>
#include <asm/page.h>
+#include <asm/efibind.h>
+#include <efi/efidef.h>
+#include <efi/eficapsule.h>
+#include <efi/eficon.h>
+#include <efi/efidevp.h>
+#include <efi/efiapi.h>
+
+/*
+ * Here we are in EFI stub. EFI calls are not supported due to lack
+ * of relevant functionality in compiler and/or linker.
+ *
+ * efi_multiboot2() is an exception. Please look below for more details.
+ */
+
+paddr_t __init noreturn efi_multiboot2(EFI_HANDLE ImageHandle,
+ EFI_SYSTEM_TABLE *SystemTable)
+{
+ static const CHAR16 __initconst err[] =
+ L"(XEN) Xen does not have EFI code build in!\r\n(XEN) System
halted!\r\n";
+ SIMPLE_TEXT_OUTPUT_INTERFACE *StdErr;
+
+ StdErr = SystemTable->StdErr ? SystemTable->StdErr : SystemTable->ConOut;
+
+ /*
+ * Print error message and halt the system.
+ *
+ * We have to open code MS x64 calling convention
+ * in assembly because here this convention may
+ * not be directly supported by C compiler.
+ */
+ asm volatile(
+ " call *%2 \n"
+ "0: hlt \n"
+ " jmp 0b \n"
+ : "+c" (StdErr), "+d" (err) : "rm" (StdErr->OutputString)
+ : "rax", "r8", "r9", "r10", "r11", "memory");
+
+ unreachable();
+}
bool efi_enabled(unsigned int feature)
{
diff --git a/xen/arch/x86/x86_64/asm-offsets.c
b/xen/arch/x86/x86_64/asm-offsets.c
index 92f5d81..f135654 100644
--- a/xen/arch/x86/x86_64/asm-offsets.c
+++ b/xen/arch/x86/x86_64/asm-offsets.c
@@ -175,6 +175,8 @@ void __dummy__(void)
OFFSET(MB2_tag_type, multiboot2_tag_t, type);
OFFSET(MB2_tag_size, multiboot2_tag_t, size);
OFFSET(MB2_mem_lower, multiboot2_tag_basic_meminfo_t, mem_lower);
+ OFFSET(MB2_efi64_st, multiboot2_tag_efi64_t, pointer);
+ OFFSET(MB2_efi64_ih, multiboot2_tag_efi64_ih_t, pointer);
BLANK();
OFFSET(DOMAIN_vm_assist, struct domain, vm_assist);
diff --git a/xen/arch/x86/xen.lds.S b/xen/arch/x86/xen.lds.S
index b0b1c9b..addf2ef 100644
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -331,5 +331,8 @@ ASSERT(IS_ALIGNED(__init_end, PAGE_SIZE), "__init_end
misaligned")
ASSERT(IS_ALIGNED(trampoline_start, 4), "trampoline_start misaligned")
ASSERT(IS_ALIGNED(trampoline_end, 4), "trampoline_end misaligned")
-ASSERT(IS_ALIGNED(__bss_start, 4), "__bss_start misaligned")
-ASSERT(IS_ALIGNED(__bss_end, 4), "__bss_end misaligned")
+ASSERT(IS_ALIGNED(__bss_start, 8), "__bss_start misaligned")
+ASSERT(IS_ALIGNED(__bss_end, 8), "__bss_end misaligned")
+
+ASSERT((trampoline_end - trampoline_start) < TRAMPOLINE_SPACE,
+ "not enough room for trampoline")
diff --git a/xen/common/efi/boot.c b/xen/common/efi/boot.c
index 36dbb71..b6cbdad 100644
--- a/xen/common/efi/boot.c
+++ b/xen/common/efi/boot.c
@@ -79,6 +79,17 @@ static size_t wstrlen(const CHAR16 * s);
static int set_color(u32 mask, int bpp, u8 *pos, u8 *sz);
static bool_t match_guid(const EFI_GUID *guid1, const EFI_GUID *guid2);
+static void efi_init(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable);
+static void efi_console_set_mode(void);
+static EFI_GRAPHICS_OUTPUT_PROTOCOL *efi_get_gop(void);
+static UINTN efi_find_gop_mode(EFI_GRAPHICS_OUTPUT_PROTOCOL *gop,
+ UINTN cols, UINTN rows, UINTN depth);
+static void efi_tables(void);
+static void setup_efi_pci(void);
+static void efi_variables(void);
+static void efi_set_gop_mode(EFI_GRAPHICS_OUTPUT_PROTOCOL *gop, UINTN
gop_mode);
+static void efi_exit_boot(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE
*SystemTable);
+
static const EFI_BOOT_SERVICES *__initdata efi_bs;
static UINT32 __initdata efi_bs_revision;
static EFI_HANDLE __initdata efi_ih;
diff --git a/xen/include/asm-x86/config.h b/xen/include/asm-x86/config.h
index 6fd84e7..9cd05a2 100644
--- a/xen/include/asm-x86/config.h
+++ b/xen/include/asm-x86/config.h
@@ -73,6 +73,9 @@
#define STACK_ORDER 3
#define STACK_SIZE (PAGE_SIZE << STACK_ORDER)
+#define TRAMPOLINE_STACK_SPACE PAGE_SIZE
+#define TRAMPOLINE_SPACE (KB(64) - TRAMPOLINE_STACK_SPACE)
+
/* Primary stack is restricted to 8kB by guard pages. */
#define PRIMARY_STACK_SIZE 8192
diff --git a/xen/include/xen/config.h b/xen/include/xen/config.h
index 473c5e8..04e4da5 100644
--- a/xen/include/xen/config.h
+++ b/xen/include/xen/config.h
@@ -70,6 +70,7 @@
#define __force
#define __bitwise
+#define KB(_kb) (_AC(_kb, ULL) << 10)
#define MB(_mb) (_AC(_mb, ULL) << 20)
#define GB(_gb) (_AC(_gb, ULL) << 30)
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |