|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v2 2/9] xen/x86: Remove PVH support
We are replacing existing PVH guests with new implementation.
We are keeping xen_pvh_domain() macro (for now set to zero) because
when we introduce new PVH implementation later in this series we will
reuse current PVH-specific code (xen_pvh_gnttab_setup()), and that
code is conditioned by 'if (xen_pvh_domain())'. (We will also need
a noop xen_pvh_domain() for !CONFIG_XEN_PVH).
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
Reviewed-by: Juergen Gross <jgross@xxxxxxxx>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
---
Changes in v2:
* Added comment to commit message clarifying why xen_pvh_domain()
is kept.
arch/x86/xen/enlighten.c | 140 ++++++---------------------------------
arch/x86/xen/mmu.c | 21 +-----
arch/x86/xen/setup.c | 37 +----------
arch/x86/xen/smp.c | 78 ++++++++--------------
arch/x86/xen/smp.h | 8 ---
arch/x86/xen/xen-head.S | 62 ++---------------
arch/x86/xen/xen-ops.h | 1 -
drivers/xen/events/events_base.c | 1 -
include/xen/xen.h | 13 +---
9 files changed, 54 insertions(+), 307 deletions(-)
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 51ef952..828f1b2 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1138,10 +1138,11 @@ void xen_setup_vcpu_info_placement(void)
xen_vcpu_setup(cpu);
}
- /* xen_vcpu_setup managed to place the vcpu_info within the
- * percpu area for all cpus, so make use of it. Note that for
- * PVH we want to use native IRQ mechanism. */
- if (have_vcpu_info_placement && !xen_pvh_domain()) {
+ /*
+ * xen_vcpu_setup managed to place the vcpu_info within the
+ * percpu area for all cpus, so make use of it.
+ */
+ if (have_vcpu_info_placement) {
pv_irq_ops.save_fl = __PV_IS_CALLEE_SAVE(xen_save_fl_direct);
pv_irq_ops.restore_fl =
__PV_IS_CALLEE_SAVE(xen_restore_fl_direct);
pv_irq_ops.irq_disable =
__PV_IS_CALLEE_SAVE(xen_irq_disable_direct);
@@ -1413,49 +1414,9 @@ static void __init xen_boot_params_init_edd(void)
* Set up the GDT and segment registers for -fstack-protector. Until
* we do this, we have to be careful not to call any stack-protected
* function, which is most of the kernel.
- *
- * Note, that it is __ref because the only caller of this after init
- * is PVH which is not going to use xen_load_gdt_boot or other
- * __init functions.
*/
-static void __ref xen_setup_gdt(int cpu)
+static void xen_setup_gdt(int cpu)
{
- if (xen_feature(XENFEAT_auto_translated_physmap)) {
-#ifdef CONFIG_X86_64
- unsigned long dummy;
-
- load_percpu_segment(cpu); /* We need to access per-cpu area */
- switch_to_new_gdt(cpu); /* GDT and GS set */
-
- /* We are switching of the Xen provided GDT to our HVM mode
- * GDT. The new GDT has __KERNEL_CS with CS.L = 1
- * and we are jumping to reload it.
- */
- asm volatile ("pushq %0\n"
- "leaq 1f(%%rip),%0\n"
- "pushq %0\n"
- "lretq\n"
- "1:\n"
- : "=&r" (dummy) : "0" (__KERNEL_CS));
-
- /*
- * While not needed, we also set the %es, %ds, and %fs
- * to zero. We don't care about %ss as it is NULL.
- * Strictly speaking this is not needed as Xen zeros those
- * out (and also MSR_FS_BASE, MSR_GS_BASE, MSR_KERNEL_GS_BASE)
- *
- * Linux zeros them in cpu_init() and in secondary_startup_64
- * (for BSP).
- */
- loadsegment(es, 0);
- loadsegment(ds, 0);
- loadsegment(fs, 0);
-#else
- /* PVH: TODO Implement. */
- BUG();
-#endif
- return; /* PVH does not need any PV GDT ops. */
- }
pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry_boot;
pv_cpu_ops.load_gdt = xen_load_gdt_boot;
@@ -1466,59 +1427,6 @@ static void __ref xen_setup_gdt(int cpu)
pv_cpu_ops.load_gdt = xen_load_gdt;
}
-#ifdef CONFIG_XEN_PVH
-/*
- * A PV guest starts with default flags that are not set for PVH, set them
- * here asap.
- */
-static void xen_pvh_set_cr_flags(int cpu)
-{
-
- /* Some of these are setup in 'secondary_startup_64'. The others:
- * X86_CR0_TS, X86_CR0_PE, X86_CR0_ET are set by Xen for HVM guests
- * (which PVH shared codepaths), while X86_CR0_PG is for PVH. */
- write_cr0(read_cr0() | X86_CR0_MP | X86_CR0_NE | X86_CR0_WP |
X86_CR0_AM);
-
- if (!cpu)
- return;
- /*
- * For BSP, PSE PGE are set in probe_page_size_mask(), for APs
- * set them here. For all, OSFXSR OSXMMEXCPT are set in fpu__init_cpu().
- */
- if (boot_cpu_has(X86_FEATURE_PSE))
- cr4_set_bits_and_update_boot(X86_CR4_PSE);
-
- if (boot_cpu_has(X86_FEATURE_PGE))
- cr4_set_bits_and_update_boot(X86_CR4_PGE);
-}
-
-/*
- * Note, that it is ref - because the only caller of this after init
- * is PVH which is not going to use xen_load_gdt_boot or other
- * __init functions.
- */
-void __ref xen_pvh_secondary_vcpu_init(int cpu)
-{
- xen_setup_gdt(cpu);
- xen_pvh_set_cr_flags(cpu);
-}
-
-static void __init xen_pvh_early_guest_init(void)
-{
- if (!xen_feature(XENFEAT_auto_translated_physmap))
- return;
-
- BUG_ON(!xen_feature(XENFEAT_hvm_callback_vector));
-
- xen_pvh_early_cpu_init(0, false);
- xen_pvh_set_cr_flags(0);
-
-#ifdef CONFIG_X86_32
- BUG(); /* PVH: Implement proper support. */
-#endif
-}
-#endif /* CONFIG_XEN_PVH */
-
static void __init xen_dom0_set_legacy_features(void)
{
x86_platform.legacy.rtc = 1;
@@ -1555,24 +1463,17 @@ asmlinkage __visible void __init xen_start_kernel(void)
xen_domain_type = XEN_PV_DOMAIN;
xen_setup_features();
-#ifdef CONFIG_XEN_PVH
- xen_pvh_early_guest_init();
-#endif
+
xen_setup_machphys_mapping();
/* Install Xen paravirt ops */
pv_info = xen_info;
pv_init_ops = xen_init_ops;
- if (!xen_pvh_domain()) {
- pv_cpu_ops = xen_cpu_ops;
+ pv_cpu_ops = xen_cpu_ops;
- x86_platform.get_nmi_reason = xen_get_nmi_reason;
- }
+ x86_platform.get_nmi_reason = xen_get_nmi_reason;
- if (xen_feature(XENFEAT_auto_translated_physmap))
- x86_init.resources.memory_setup = xen_auto_xlated_memory_setup;
- else
- x86_init.resources.memory_setup = xen_memory_setup;
+ x86_init.resources.memory_setup = xen_memory_setup;
x86_init.oem.arch_setup = xen_arch_setup;
x86_init.oem.banner = xen_banner;
@@ -1665,18 +1566,15 @@ asmlinkage __visible void __init xen_start_kernel(void)
/* set the limit of our address space */
xen_reserve_top();
- /* PVH: runs at default kernel iopl of 0 */
- if (!xen_pvh_domain()) {
- /*
- * We used to do this in xen_arch_setup, but that is too late
- * on AMD were early_cpu_init (run before ->arch_setup()) calls
- * early_amd_init which pokes 0xcf8 port.
- */
- set_iopl.iopl = 1;
- rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
- if (rc != 0)
- xen_raw_printk("physdev_op failed %d\n", rc);
- }
+ /*
+ * We used to do this in xen_arch_setup, but that is too late
+ * on AMD were early_cpu_init (run before ->arch_setup()) calls
+ * early_amd_init which pokes 0xcf8 port.
+ */
+ set_iopl.iopl = 1;
+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
+ if (rc != 0)
+ xen_raw_printk("physdev_op failed %d\n", rc);
#ifdef CONFIG_X86_32
/* set up basic CPUID stuff */
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 7d5afdb..f6740b5 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1792,10 +1792,6 @@ static void __init set_page_prot_flags(void *addr,
pgprot_t prot,
unsigned long pfn = __pa(addr) >> PAGE_SHIFT;
pte_t pte = pfn_pte(pfn, prot);
- /* For PVH no need to set R/O or R/W to pin them or unpin them. */
- if (xen_feature(XENFEAT_auto_translated_physmap))
- return;
-
if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, flags))
BUG();
}
@@ -1902,8 +1898,7 @@ static void __init check_pt_base(unsigned long *pt_base,
unsigned long *pt_end,
* level2_ident_pgt, and level2_kernel_pgt. This means that only the
* kernel has a physical mapping to start with - but that's enough to
* get __va working. We need to fill in the rest of the physical
- * mapping once some sort of allocator has been set up. NOTE: for
- * PVH, the page tables are native.
+ * mapping once some sort of allocator has been set up.
*/
void __init xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
{
@@ -2812,16 +2807,6 @@ static int do_remap_gfn(struct vm_area_struct *vma,
BUG_ON(!((vma->vm_flags & (VM_PFNMAP | VM_IO)) == (VM_PFNMAP | VM_IO)));
- if (xen_feature(XENFEAT_auto_translated_physmap)) {
-#ifdef CONFIG_XEN_PVH
- /* We need to update the local page tables and the xen HAP */
- return xen_xlate_remap_gfn_array(vma, addr, gfn, nr, err_ptr,
- prot, domid, pages);
-#else
- return -EINVAL;
-#endif
- }
-
rmd.mfn = gfn;
rmd.prot = prot;
/* We use the err_ptr to indicate if there we are doing a contiguous
@@ -2915,10 +2900,6 @@ int xen_unmap_domain_gfn_range(struct vm_area_struct
*vma,
if (!pages || !xen_feature(XENFEAT_auto_translated_physmap))
return 0;
-#ifdef CONFIG_XEN_PVH
- return xen_xlate_unmap_gfn_range(vma, numpgs, pages);
-#else
return -EINVAL;
-#endif
}
EXPORT_SYMBOL_GPL(xen_unmap_domain_gfn_range);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index f3f7b41..a8c306c 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -915,39 +915,6 @@ char * __init xen_memory_setup(void)
}
/*
- * Machine specific memory setup for auto-translated guests.
- */
-char * __init xen_auto_xlated_memory_setup(void)
-{
- struct xen_memory_map memmap;
- int i;
- int rc;
-
- memmap.nr_entries = ARRAY_SIZE(xen_e820_map);
- set_xen_guest_handle(memmap.buffer, xen_e820_map);
-
- rc = HYPERVISOR_memory_op(XENMEM_memory_map, &memmap);
- if (rc < 0)
- panic("No memory map (%d)\n", rc);
-
- xen_e820_map_entries = memmap.nr_entries;
-
- sanitize_e820_map(xen_e820_map, ARRAY_SIZE(xen_e820_map),
- &xen_e820_map_entries);
-
- for (i = 0; i < xen_e820_map_entries; i++)
- e820_add_region(xen_e820_map[i].addr, xen_e820_map[i].size,
- xen_e820_map[i].type);
-
- /* Remove p2m info, it is not needed. */
- xen_start_info->mfn_list = 0;
- xen_start_info->first_p2m_pfn = 0;
- xen_start_info->nr_p2m_frames = 0;
-
- return "Xen";
-}
-
-/*
* Set the bit indicating "nosegneg" library variants should be used.
* We only need to bother in pure 32-bit mode; compat 32-bit processes
* can have un-truncated segments, so wrapping around is allowed.
@@ -1032,8 +999,8 @@ void __init xen_pvmmu_arch_setup(void)
void __init xen_arch_setup(void)
{
xen_panic_handler_init();
- if (!xen_feature(XENFEAT_auto_translated_physmap))
- xen_pvmmu_arch_setup();
+
+ xen_pvmmu_arch_setup();
#ifdef CONFIG_ACPI
if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 311acad..0dee6f5 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -99,18 +99,8 @@ static void cpu_bringup(void)
local_irq_enable();
}
-/*
- * Note: cpu parameter is only relevant for PVH. The reason for passing it
- * is we can't do smp_processor_id until the percpu segments are loaded, for
- * which we need the cpu number! So we pass it in rdi as first parameter.
- */
-asmlinkage __visible void cpu_bringup_and_idle(int cpu)
+asmlinkage __visible void cpu_bringup_and_idle(void)
{
-#ifdef CONFIG_XEN_PVH
- if (xen_feature(XENFEAT_auto_translated_physmap) &&
- xen_feature(XENFEAT_supervisor_mode_kernel))
- xen_pvh_secondary_vcpu_init(cpu);
-#endif
cpu_bringup();
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
}
@@ -404,61 +394,47 @@ static void __init xen_smp_prepare_cpus(unsigned int
max_cpus)
gdt = get_cpu_gdt_table(cpu);
#ifdef CONFIG_X86_32
- /* Note: PVH is not yet supported on x86_32. */
ctxt->user_regs.fs = __KERNEL_PERCPU;
ctxt->user_regs.gs = __KERNEL_STACK_CANARY;
#endif
memset(&ctxt->fpu_ctxt, 0, sizeof(ctxt->fpu_ctxt));
- if (!xen_feature(XENFEAT_auto_translated_physmap)) {
- ctxt->user_regs.eip = (unsigned long)cpu_bringup_and_idle;
- ctxt->flags = VGCF_IN_KERNEL;
- ctxt->user_regs.eflags = 0x1000; /* IOPL_RING1 */
- ctxt->user_regs.ds = __USER_DS;
- ctxt->user_regs.es = __USER_DS;
- ctxt->user_regs.ss = __KERNEL_DS;
+ ctxt->user_regs.eip = (unsigned long)cpu_bringup_and_idle;
+ ctxt->flags = VGCF_IN_KERNEL;
+ ctxt->user_regs.eflags = 0x1000; /* IOPL_RING1 */
+ ctxt->user_regs.ds = __USER_DS;
+ ctxt->user_regs.es = __USER_DS;
+ ctxt->user_regs.ss = __KERNEL_DS;
- xen_copy_trap_info(ctxt->trap_ctxt);
+ xen_copy_trap_info(ctxt->trap_ctxt);
- ctxt->ldt_ents = 0;
+ ctxt->ldt_ents = 0;
- BUG_ON((unsigned long)gdt & ~PAGE_MASK);
+ BUG_ON((unsigned long)gdt & ~PAGE_MASK);
- gdt_mfn = arbitrary_virt_to_mfn(gdt);
- make_lowmem_page_readonly(gdt);
- make_lowmem_page_readonly(mfn_to_virt(gdt_mfn));
+ gdt_mfn = arbitrary_virt_to_mfn(gdt);
+ make_lowmem_page_readonly(gdt);
+ make_lowmem_page_readonly(mfn_to_virt(gdt_mfn));
- ctxt->gdt_frames[0] = gdt_mfn;
- ctxt->gdt_ents = GDT_ENTRIES;
+ ctxt->gdt_frames[0] = gdt_mfn;
+ ctxt->gdt_ents = GDT_ENTRIES;
- ctxt->kernel_ss = __KERNEL_DS;
- ctxt->kernel_sp = idle->thread.sp0;
+ ctxt->kernel_ss = __KERNEL_DS;
+ ctxt->kernel_sp = idle->thread.sp0;
#ifdef CONFIG_X86_32
- ctxt->event_callback_cs = __KERNEL_CS;
- ctxt->failsafe_callback_cs = __KERNEL_CS;
+ ctxt->event_callback_cs = __KERNEL_CS;
+ ctxt->failsafe_callback_cs = __KERNEL_CS;
#else
- ctxt->gs_base_kernel = per_cpu_offset(cpu);
-#endif
- ctxt->event_callback_eip =
- (unsigned long)xen_hypervisor_callback;
- ctxt->failsafe_callback_eip =
- (unsigned long)xen_failsafe_callback;
- ctxt->user_regs.cs = __KERNEL_CS;
- per_cpu(xen_cr3, cpu) = __pa(swapper_pg_dir);
- }
-#ifdef CONFIG_XEN_PVH
- else {
- /*
- * The vcpu comes on kernel page tables which have the NX pte
- * bit set. This means before DS/SS is touched, NX in
- * EFER must be set. Hence the following assembly glue code.
- */
- ctxt->user_regs.eip = (unsigned long)xen_pvh_early_cpu_init;
- ctxt->user_regs.rdi = cpu;
- ctxt->user_regs.rsi = true; /* entry == true */
- }
+ ctxt->gs_base_kernel = per_cpu_offset(cpu);
#endif
+ ctxt->event_callback_eip =
+ (unsigned long)xen_hypervisor_callback;
+ ctxt->failsafe_callback_eip =
+ (unsigned long)xen_failsafe_callback;
+ ctxt->user_regs.cs = __KERNEL_CS;
+ per_cpu(xen_cr3, cpu) = __pa(swapper_pg_dir);
+
ctxt->user_regs.esp = idle->thread.sp0 - sizeof(struct pt_regs);
ctxt->ctrlreg[3] = xen_pfn_to_cr3(virt_to_gfn(swapper_pg_dir));
if (HYPERVISOR_vcpu_op(VCPUOP_initialise, xen_vcpu_nr(cpu), ctxt))
diff --git a/arch/x86/xen/smp.h b/arch/x86/xen/smp.h
index c5c16dc..9beef33 100644
--- a/arch/x86/xen/smp.h
+++ b/arch/x86/xen/smp.h
@@ -21,12 +21,4 @@ static inline int xen_smp_intr_init(unsigned int cpu)
static inline void xen_smp_intr_free(unsigned int cpu) {}
#endif /* CONFIG_SMP */
-#ifdef CONFIG_XEN_PVH
-extern void xen_pvh_early_cpu_init(int cpu, bool entry);
-#else
-static inline void xen_pvh_early_cpu_init(int cpu, bool entry)
-{
-}
-#endif
-
#endif
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index 7f8d8ab..37794e4 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -16,25 +16,6 @@
#include <xen/interface/xen-mca.h>
#include <asm/xen/interface.h>
-#ifdef CONFIG_XEN_PVH
-#define PVH_FEATURES_STR
"|writable_descriptor_tables|auto_translated_physmap|supervisor_mode_kernel"
-/* Note the lack of 'hvm_callback_vector'. Older hypervisor will
- * balk at this being part of XEN_ELFNOTE_FEATURES, so we put it in
- * XEN_ELFNOTE_SUPPORTED_FEATURES which older hypervisors will ignore.
- */
-#define PVH_FEATURES ((1 << XENFEAT_writable_page_tables) | \
- (1 << XENFEAT_auto_translated_physmap) | \
- (1 << XENFEAT_supervisor_mode_kernel) | \
- (1 << XENFEAT_hvm_callback_vector))
-/* The XENFEAT_writable_page_tables is not stricly necessary as we set that
- * up regardless whether this CONFIG option is enabled or not, but it
- * clarifies what the right flags need to be.
- */
-#else
-#define PVH_FEATURES_STR ""
-#define PVH_FEATURES (0)
-#endif
-
__INIT
ENTRY(startup_xen)
cld
@@ -54,41 +35,6 @@ ENTRY(startup_xen)
__FINIT
-#ifdef CONFIG_XEN_PVH
-/*
- * xen_pvh_early_cpu_init() - early PVH VCPU initialization
- * @cpu: this cpu number (%rdi)
- * @entry: true if this is a secondary vcpu coming up on this entry
- * point, false if this is the boot CPU being initialized for
- * the first time (%rsi)
- *
- * Note: This is called as a function on the boot CPU, and is the entry point
- * on the secondary CPU.
- */
-ENTRY(xen_pvh_early_cpu_init)
- mov %rsi, %r11
-
- /* Gather features to see if NX implemented. */
- mov $0x80000001, %eax
- cpuid
- mov %edx, %esi
-
- mov $MSR_EFER, %ecx
- rdmsr
- bts $_EFER_SCE, %eax
-
- bt $20, %esi
- jnc 1f /* No NX, skip setting it */
- bts $_EFER_NX, %eax
-1: wrmsr
-#ifdef CONFIG_SMP
- cmp $0, %r11b
- jne cpu_bringup_and_idle
-#endif
- ret
-
-#endif /* CONFIG_XEN_PVH */
-
.pushsection .text
.balign PAGE_SIZE
ENTRY(hypercall_page)
@@ -114,10 +60,10 @@ ENTRY(hypercall_page)
#endif
ELFNOTE(Xen, XEN_ELFNOTE_ENTRY, _ASM_PTR startup_xen)
ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, _ASM_PTR hypercall_page)
- ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .ascii
"!writable_page_tables|pae_pgdir_above_4gb"; .asciz PVH_FEATURES_STR)
- ELFNOTE(Xen, XEN_ELFNOTE_SUPPORTED_FEATURES, .long (PVH_FEATURES) |
- (1 <<
XENFEAT_writable_page_tables) |
- (1 << XENFEAT_dom0))
+ ELFNOTE(Xen, XEN_ELFNOTE_FEATURES,
+ .ascii "!writable_page_tables|pae_pgdir_above_4gb")
+ ELFNOTE(Xen, XEN_ELFNOTE_SUPPORTED_FEATURES,
+ .long (1 << XENFEAT_writable_page_tables) | (1 << XENFEAT_dom0))
ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes")
ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic")
ELFNOTE(Xen, XEN_ELFNOTE_L1_MFN_VALID,
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index ac0a2b0..f6a41c4 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -146,5 +146,4 @@ static inline void __init xen_efi_init(void)
extern int xen_panic_handler_init(void);
-void xen_pvh_secondary_vcpu_init(int cpu);
#endif /* XEN_OPS_H */
diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c
index fd8e872..6a53577 100644
--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -1704,7 +1704,6 @@ void __init xen_init_IRQ(void)
pirq_eoi_map = (void *)__get_free_page(GFP_KERNEL|__GFP_ZERO);
eoi_gmfn.gmfn = virt_to_gfn(pirq_eoi_map);
rc = HYPERVISOR_physdev_op(PHYSDEVOP_pirq_eoi_gmfn_v2,
&eoi_gmfn);
- /* TODO: No PVH support for PIRQ EOI */
if (rc != 0) {
free_page((unsigned long) pirq_eoi_map);
pirq_eoi_map = NULL;
diff --git a/include/xen/xen.h b/include/xen/xen.h
index f0f0252..d0f9684 100644
--- a/include/xen/xen.h
+++ b/include/xen/xen.h
@@ -29,17 +29,6 @@ enum xen_domain_type {
#define xen_initial_domain() (0)
#endif /* CONFIG_XEN_DOM0 */
-#ifdef CONFIG_XEN_PVH
-/* This functionality exists only for x86. The XEN_PVHVM support exists
- * only in x86 world - hence on ARM it will be always disabled.
- * N.B. ARM guests are neither PV nor HVM nor PVHVM.
- * It's a bit like PVH but is different also (it's further towards the H
- * end of the spectrum than even PVH).
- */
-#include <xen/features.h>
-#define xen_pvh_domain() (xen_pv_domain() && \
- xen_feature(XENFEAT_auto_translated_physmap))
-#else
#define xen_pvh_domain() (0)
-#endif
+
#endif /* _XEN_XEN_H */
--
1.8.3.1
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |