[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v15 06/10] x86: change default load address from 1 MiB to 2 MiB



Subsequent patches introducing relocatable early boot code play with
page tables using 2 MiB huge pages. If load address is not aligned at
2 MiB then code touching such page tables must have special cases for
start and end of Xen image memory region. So, let's make life easier
and move default load address from 1 MiB to 2 MiB. This way page table
code will be nice and easy. Hence, there is a chance that it will be
less error prone too... :-)))

Additionally, drop first 2 MiB mapping from Xen image mapping.
It is no longer needed.

Signed-off-by: Daniel Kiper <daniel.kiper@xxxxxxxxxx>
Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx>
Reviewed-by: Doug Goldstein <cardoe@xxxxxxxxxx>
---
v8 - suggestions/fixes:
   - drop first 2 MiB mapping from Xen image mapping
     (suggested by Jan Beulich),
   - improve commit message.

v7 - suggestions/fixes:
   - minor cleanups
     (suggested by Jan Beulich).
---
 xen/arch/x86/Makefile      |    2 +-
 xen/arch/x86/Rules.mk      |    3 +++
 xen/arch/x86/boot/head.S   |    8 --------
 xen/arch/x86/boot/x86_64.S |    5 +++--
 xen/arch/x86/setup.c       |    3 ++-
 xen/arch/x86/xen.lds.S     |    2 +-
 6 files changed, 10 insertions(+), 13 deletions(-)

diff --git a/xen/arch/x86/Makefile b/xen/arch/x86/Makefile
index 08e9f7b..e5b840e 100644
--- a/xen/arch/x86/Makefile
+++ b/xen/arch/x86/Makefile
@@ -90,7 +90,7 @@ all_symbols =
 endif
 
 $(TARGET): $(TARGET)-syms $(efi-y) boot/mkelf32
-       ./boot/mkelf32 $(notes_phdrs) $(TARGET)-syms $(TARGET) 0x100000 \
+       ./boot/mkelf32 $(notes_phdrs) $(TARGET)-syms $(TARGET) 
$(XEN_IMG_OFFSET) \
                       `$(NM) $(TARGET)-syms | sed -ne 's/^\([^ ]*\) . 
__2M_rwdata_end$$/0x\1/p'`
 
 ALL_OBJS := $(BASEDIR)/arch/x86/boot/built_in.o 
$(BASEDIR)/arch/x86/efi/built_in.o $(ALL_OBJS)
diff --git a/xen/arch/x86/Rules.mk b/xen/arch/x86/Rules.mk
index 72be8b2..568657e 100644
--- a/xen/arch/x86/Rules.mk
+++ b/xen/arch/x86/Rules.mk
@@ -1,9 +1,12 @@
 ########################################
 # x86-specific definitions
 
+XEN_IMG_OFFSET := 0x200000
+
 CFLAGS += -I$(BASEDIR)/include
 CFLAGS += -I$(BASEDIR)/include/asm-x86/mach-generic
 CFLAGS += -I$(BASEDIR)/include/asm-x86/mach-default
+CFLAGS += -DXEN_IMG_OFFSET=$(XEN_IMG_OFFSET)
 CFLAGS += '-D__OBJECT_LABEL__=$(subst /,$$,$(subst -,_,$(subst 
$(BASEDIR)/,,$(CURDIR))/$@))'
 
 # Prevent floating-point variables from creeping into Xen.
diff --git a/xen/arch/x86/boot/head.S b/xen/arch/x86/boot/head.S
index eb738d4..fca0cef 100644
--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -519,14 +519,6 @@ trampoline_setup:
         mov     %eax,sym_phys(boot_tsc_stamp)
         mov     %edx,sym_phys(boot_tsc_stamp+4)
 
-        /*
-         * During boot, hook 4kB mappings of first 2MB of memory into L2.
-         * This avoids mixing cachability for the legacy VGA region, and is
-         * corrected when Xen relocates itself.
-         */
-        mov     $sym_phys(l1_identmap)+__PAGE_HYPERVISOR,%edi
-        mov     %edi,sym_phys(l2_xenmap)
-
         /* Apply relocations to bootstrap trampoline. */
         mov     sym_phys(trampoline_phys),%edx
         mov     $sym_phys(__trampoline_rel_start),%edi
diff --git a/xen/arch/x86/boot/x86_64.S b/xen/arch/x86/boot/x86_64.S
index 4d507fb..f9d1022 100644
--- a/xen/arch/x86/boot/x86_64.S
+++ b/xen/arch/x86/boot/x86_64.S
@@ -121,8 +121,9 @@ GLOBAL(l2_identmap)
  * page.
  */
 GLOBAL(l2_xenmap)
-        idx = 0
-        .rept 8
+        .quad 0
+        idx = 1
+        .rept 7
         .quad sym_phys(__image_base__) + (idx << L2_PAGETABLE_SHIFT) + 
(PAGE_HYPERVISOR | _PAGE_PSE)
         idx = idx + 1
         .endr
diff --git a/xen/arch/x86/setup.c b/xen/arch/x86/setup.c
index e1b6590..525ce7a 100644
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -999,7 +999,8 @@ void __init noreturn __start_xen(unsigned long mbi_p)
              * Undo the temporary-hooking of the l1_identmap.  __2M_text_start
              * is contained in this PTE.
              */
-            BUG_ON(l2_table_offset((unsigned long)_erodata) ==
+            BUG_ON(using_2M_mapping() &&
+                   l2_table_offset((unsigned long)_erodata) ==
                    l2_table_offset((unsigned long)_stext));
             *pl2e++ = l2e_from_pfn(xen_phys_start >> PAGE_SHIFT,
                                    PAGE_HYPERVISOR_RX | _PAGE_PSE);
diff --git a/xen/arch/x86/xen.lds.S b/xen/arch/x86/xen.lds.S
index 76e18ab..6039496 100644
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -55,7 +55,7 @@ SECTIONS
   __2M_text_start = .;         /* Start of 2M superpages, mapped RX. */
 #endif
 
-  . = __XEN_VIRT_START + MB(1);
+  . = __XEN_VIRT_START + XEN_IMG_OFFSET;
   _start = .;
   .text : {
         _stext = .;            /* Text and read-only data */
-- 
1.7.10.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.