[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH for-4.9] xen/arm: acpi: Map MMIO on fault in stage-2 page table for the hardware domain



When booting using ACPI, not all MMIOs can be discovered by parsing the
static tables or the UEFI memory map. A lot of them will be described in
the DSDT. However, Xen does not have an AML parser which requires us to
find a different approach.

During the first discussions on supporting ACPI (see design doc [1]), it
was decided to rely on the hardware domain to make a request to the
hypervisor to map the MMIO region in stage-2 page table before accessing
it. This approach works fine if the OS has limited hooks to modify the
page tables.

In the case of Linux kernel, notifiers have been added to map
the MMIO regions when adding a new AMBA/platform device. Whilst this is
covering most of the MMIOs, some of them (e.g OpRegion, ECAM...) are not
related to a specific device or the driver is not using the
AMBA/platform API. So more hooks would need to be added in the code.

Various approaches have been discussed (see [2]), one of them was to
create stage-2 mappings seamlessly in Xen upon hardware memory faults.
This approach was first ruled out because it relies on the hardware
domain to probe the region before any use. So this would not work when
DMA'ing to another device's MMIO region when the device is protected by
an SMMU. It has been pointed out that this is a limited use case compare
to DMA'ing between MMIO and RAM.

This patch implements this approach. All MMIOs region will be mapped in
stage-2 using p2m_mmio_direct_c (i.e normal memory outer and inner
write-back cacheable). The stage-1 page table will be in control of the
memory attribute. This is fine because the hardware domain is a trusted
domain.

Note that MMIO will only be mapped on a data abort fault. It is assumed
that it will not be possible to execute code from MMIO
(p2m_mmio_direct_c will forbid that).

As mentioned above, this solution will cover most of the cases. If a
platform requires to do DMA'ing to another device's MMIO region without
any access performed by the OS. Then it will be expected to have
specific platform code in the hypervisor to map the MMIO at boot time or
the OS to use the existing hypercalls (i.e XENMEM_add_to_add_physmap{,_batch})
before any access.

[1] https://lists.xen.org/archives/html/xen-devel/2015-11/msg00488.html
[2] https://marc.info/?l=linux-arm-kernel&m=148469169210500&w=2

Signed-off-by: Julien Grall <julien.grall@xxxxxxx>

---
    This patch is a candidate for Xen 4.9. Whilst the last posting date
    was few days ago, I think it would be good to have this patch in the
    next release. Although ACPI support for ARM64 is still a technical
    preview, it would help servers to test Xen upstream on their platform
    with ACPI and provide feedback on missing features.

    All the code is gated by !acpi_disabled and therefore will not be
    executed on when using Device Tree.

    RM hat on: I will leave the decision to Stefano.

    Shanker: You mentioned offline that you tested the patch. May I add
    your tested-by?

---
 xen/arch/arm/traps.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/xen/arch/arm/traps.c b/xen/arch/arm/traps.c
index 614501f761..ebf915bb3b 100644
--- a/xen/arch/arm/traps.c
+++ b/xen/arch/arm/traps.c
@@ -32,6 +32,7 @@
 #include <xen/perfc.h>
 #include <xen/virtual_region.h>
 #include <xen/mem_access.h>
+#include <xen/iocap.h>
 #include <public/sched.h>
 #include <public/xen.h>
 #include <asm/debugger.h>
@@ -49,6 +50,7 @@
 #include <asm/gic.h>
 #include <asm/vgic.h>
 #include <asm/cpuerrata.h>
+#include <asm/acpi.h>
 
 /* The base of the stack must always be double-word aligned, which means
  * that both the kernel half of struct cpu_user_regs (which is pushed in
@@ -2534,6 +2536,35 @@ static bool try_handle_mmio(struct cpu_user_regs *regs,
     return !!handle_mmio(info);
 }
 
+/*
+ * When using ACPI, most of the MMIO regions will be mapped on-demand
+ * in stage-2 page tables for the hardware domain because Xen is not
+ * able to know from the EFI memory map the MMIO regions.
+ */
+static bool try_map_mmio(gfn_t gfn)
+{
+    struct domain *d = current->domain;
+
+    /* For the hardware domain, all MMIOs are mapped with GFN == MFN */
+    mfn_t mfn = _mfn(gfn_x(gfn));
+
+    /*
+     * Device-Tree should already have everything mapped when building
+     * the hardware domain.
+     */
+    if ( acpi_disabled )
+        return false;
+
+    if ( d != hardware_domain )
+        return false;
+
+    /* The hardware domain can only map permitted MMIO regions */
+    if ( !iomem_access_permitted(d, mfn_x(mfn), mfn_x(mfn) + 1) )
+        return false;
+
+    return !map_regions_p2mt(d, gfn, 1, mfn, p2m_mmio_direct_c);
+}
+
 static void do_trap_data_abort_guest(struct cpu_user_regs *regs,
                                      const union hsr hsr)
 {
@@ -2611,6 +2642,9 @@ static void do_trap_data_abort_guest(struct cpu_user_regs 
*regs,
         if ( !mfn_eq(mfn, INVALID_MFN) )
             return;
 
+        if ( try_map_mmio(_gfn(paddr_to_pfn(info.gpa))) )
+            return;
+
         break;
     default:
         gprintk(XENLOG_WARNING, "Unsupported DFSC: HSR=%#x DFSC=%#x\n",
-- 
2.11.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.