[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v4 02/27] ARM: GICv3 ITS: initialize host ITS



Map the registers frame for each host ITS and populate the host ITS
structure with some parameters describing the size of certain properties
like the number of bits for device IDs.
Introduce a command line parameter to limit the number of devices Xen
should handle. This defaults to the value advertised by hardware.

Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
 docs/misc/xen-command-line.markdown |  9 ++++++++
 xen/arch/arm/gic-v3-its.c           | 38 ++++++++++++++++++++++++++++++++
 xen/arch/arm/gic-v3.c               |  5 +++++
 xen/include/asm-arm/gic_v3_its.h    | 44 +++++++++++++++++++++++++++++++++++++
 4 files changed, 96 insertions(+)

diff --git a/docs/misc/xen-command-line.markdown 
b/docs/misc/xen-command-line.markdown
index 9eb85d6..5a90625 100644
--- a/docs/misc/xen-command-line.markdown
+++ b/docs/misc/xen-command-line.markdown
@@ -1172,6 +1172,15 @@ based interrupts. Any higher IRQs will be available for 
use via PCI MSI.
 ### maxcpus
 > `= <integer>`
 
+### max\_its\_device\_bits
+> `= <integer>`
+
+Specifies the maximum number of devices using MSIs on the ARM GICv3 ITS
+controller to allocate table entries for. Each table entry uses a hardware
+specific size, typically 8 or 16 bytes. This value is given as the number
+of bits required to hold one device ID.
+Defaults to the machine provided value, which is at most 32 bits.
+
 ### mce
 > `= <integer>`
 
diff --git a/xen/arch/arm/gic-v3-its.c b/xen/arch/arm/gic-v3-its.c
index 6b02349..58c6ac0 100644
--- a/xen/arch/arm/gic-v3-its.c
+++ b/xen/arch/arm/gic-v3-its.c
@@ -19,8 +19,10 @@
  */
 
 #include <xen/lib.h>
+#include <xen/mm.h>
 #include <asm/gic_v3_defs.h>
 #include <asm/gic_v3_its.h>
+#include <asm/io.h>
 
 /*
  * No lock here, as this list gets only populated upon boot while scanning
@@ -33,6 +35,42 @@ bool gicv3_its_host_has_its(void)
     return !list_empty(&host_its_list);
 }
 
+/* Allow a user to limit the number of devices. */
+static unsigned int max_its_device_bits = 32;
+integer_param("max_its_device_bits", max_its_device_bits);
+
+static int gicv3_its_init_single_its(struct host_its *hw_its)
+{
+    uint64_t reg;
+
+    hw_its->its_base = ioremap_nocache(hw_its->addr, hw_its->size);
+    if ( !hw_its->its_base )
+        return -ENOMEM;
+
+    reg = readq_relaxed(hw_its->its_base + GITS_TYPER);
+    hw_its->devid_bits = GITS_TYPER_DEVICE_ID_BITS(reg);
+    hw_its->devid_bits = min(hw_its->devid_bits, max_its_device_bits);
+    hw_its->evid_bits = GITS_TYPER_EVENT_ID_BITS(reg);
+    hw_its->itte_size = GITS_TYPER_ITT_SIZE(reg);
+
+    return 0;
+}
+
+int gicv3_its_init(void)
+{
+    struct host_its *hw_its;
+    int ret;
+
+    list_for_each_entry(hw_its, &host_its_list, entry)
+    {
+        ret = gicv3_its_init_single_its(hw_its);
+        if ( ret )
+            return ret;
+    }
+
+    return 0;
+}
+
 /* Scan the DT for any ITS nodes and create a list of host ITSes out of it. */
 void gicv3_its_dt_init(const struct dt_device_node *node)
 {
diff --git a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c
index b626298..d3d5784 100644
--- a/xen/arch/arm/gic-v3.c
+++ b/xen/arch/arm/gic-v3.c
@@ -1590,6 +1590,11 @@ static int __init gicv3_init(void)
     spin_lock(&gicv3.lock);
 
     gicv3_dist_init();
+
+    res = gicv3_its_init();
+    if ( res )
+        panic("GICv3: ITS: initialization failed: %d\n", res);
+
     res = gicv3_cpu_init();
     gicv3_hyp_init();
 
diff --git a/xen/include/asm-arm/gic_v3_its.h b/xen/include/asm-arm/gic_v3_its.h
index 765a655..7d88987 100644
--- a/xen/include/asm-arm/gic_v3_its.h
+++ b/xen/include/asm-arm/gic_v3_its.h
@@ -20,6 +20,38 @@
 #ifndef __ASM_ARM_ITS_H__
 #define __ASM_ARM_ITS_H__
 
+#define GITS_CTLR                       0x000
+#define GITS_IIDR                       0x004
+#define GITS_TYPER                      0x008
+#define GITS_CBASER                     0x080
+#define GITS_CWRITER                    0x088
+#define GITS_CREADR                     0x090
+#define GITS_BASER_NR_REGS              8
+#define GITS_BASER0                     0x100
+#define GITS_BASER1                     0x108
+#define GITS_BASER2                     0x110
+#define GITS_BASER3                     0x118
+#define GITS_BASER4                     0x120
+#define GITS_BASER5                     0x128
+#define GITS_BASER6                     0x130
+#define GITS_BASER7                     0x138
+
+/* Register bits */
+#define GITS_TYPER_DEVIDS_SHIFT         13
+#define GITS_TYPER_DEVIDS_MASK          (0x1fUL << GITS_TYPER_DEVIDS_SHIFT)
+#define GITS_TYPER_DEVICE_ID_BITS(r)    (((r & GITS_TYPER_DEVIDS_MASK) >> \
+                                               GITS_TYPER_DEVIDS_SHIFT) + 1)
+
+#define GITS_TYPER_IDBITS_SHIFT         8
+#define GITS_TYPER_IDBITS_MASK          (0x1fUL << GITS_TYPER_IDBITS_SHIFT)
+#define GITS_TYPER_EVENT_ID_BITS(r)     (((r & GITS_TYPER_IDBITS_MASK) >> \
+                                               GITS_TYPER_IDBITS_SHIFT) + 1)
+
+#define GITS_TYPER_ITT_SIZE_SHIFT       4
+#define GITS_TYPER_ITT_SIZE_MASK        (0xfUL << GITS_TYPER_ITT_SIZE_SHIFT)
+#define GITS_TYPER_ITT_SIZE(r)          ((((r) & GITS_TYPER_ITT_SIZE_MASK) >> \
+                                                 GITS_TYPER_ITT_SIZE_SHIFT) + 
1)
+
 #include <xen/device_tree.h>
 
 /* data structure for each hardware ITS */
@@ -28,6 +60,10 @@ struct host_its {
     const struct dt_device_node *dt_node;
     paddr_t addr;
     paddr_t size;
+    void __iomem *its_base;
+    unsigned int devid_bits;
+    unsigned int evid_bits;
+    unsigned int itte_size;
 };
 
 
@@ -40,6 +76,9 @@ void gicv3_its_dt_init(const struct dt_device_node *node);
 
 bool gicv3_its_host_has_its(void);
 
+/* Initialize the host structures for the host ITSes. */
+int gicv3_its_init(void);
+
 #else
 
 static LIST_HEAD(host_its_list);
@@ -53,6 +92,11 @@ static inline bool gicv3_its_host_has_its(void)
     return false;
 }
 
+static inline int gicv3_its_init(void)
+{
+    return 0;
+}
+
 #endif /* CONFIG_HAS_ITS */
 
 #endif
-- 
2.9.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.