Re: [Xen-devel] [xen-unstable test] 106504: regressions - FAIL

[Chao Gao <chao.gao@xxxxxxxxx>]

On Wed, Mar 22, 2017 at 06:47:33AM -0600, Jan Beulich wrote:
>>>> On 22.03.17 at 05:53, <chao.gao@xxxxxxxxx> wrote:
>> I have written a xtf test case (many codes are from hvmloader) to
>> trigger this assertion. The test case is in attachments.
>
>Thanks for doing this.
>
>> Bottom is the output
>> of this test. This test initializes PIT channel0 to generate periodic timer
>> interrupt at 1000hz per second. The timer interrupt is delivered to vCPU0. 
>> And
>> vCPU1 is used to change IOAPIC RTE 2 frequently.
>
>Well, this is certainly helpful (due to some of the conclusions you
>draw below), but it is very likely not what has caused the assertion
>to trigger in osstest. So by removing the assertion (as you suggest
>below) we then will have a silent, non-understood misbehavior.
>
>> The assertion can be triggered by guest. To fix assertion failure,
>> I propose to remove this assertion for the reason below:
>
>Of course I agree that a guest triggerable assertion is bad, and
>hence needs a correction somewhere.
>
>> 1. Operations in this test case are very intrusive and abnormal. It updates 
>> RTE frequently without disabling interrupt source. In this case, I think 
>> software can't assume hardware works correctly.
>
>I guess hardware behavior simply is unspecified in such a case, so
>it's hard to judge whether it works "correctly".
>
>> 2. If we remove this assertion(means we admit pt_vector may be different
>> from (or bigger than) the vector we set in vIRR in a rare case), the side
>> effect is that we won't decrease the counter pt->ending_intr_nr in
>> pt_intr_post() and one more timer interrupt in number is injected to guest. 
>
>Which is clearly wrong, afaict, as that may drive the guest clock
>off (depending on how the guest OS does its accounting).
>
>> 3. We read RTE 3 times. 1st happens when we set vIRR. 2nd happens when
>> pt_update_irq() returns. 3rd happens in pt_intr_post(). If guest changes
>> the vector in RTE during the window, it will also incur losing or getting
>> more periodic timer interrupt.
>
>Which raises the question whether latching the value read the first
>time would address the issue you demonstrate with the test case.
>Or alternatively deferring writes to take effect only once readers
>are done with their perhaps multiple accesses?

Hi, Jan.

I plan to do the following changes:
1. get the vector set in vIRR to avoid getting a wrong interrupt vector
 I think there are two appoaches. One is to extend hvm_isa_irq_assert()
 to return the vector set in vIRR. Several functions in call trees are
 also involved. The other is to make vIOAPIC support disabling
 write operations to RTE. In this case, a rwlock_t is introduced to 
 protect RTE. pt_update_irq() will disable write operations
 at first, then get the vector and assert the vector, at last enable
 write operations. Which one do you think is better?

2. let pt_update_irq() pass the periodic timer
 whose interrupt is to be injected to vmx_intr_assit() which
 in turn can pass it to pt_intr_post(). After this, pt_intr_post()
 needn't search the periodic timer that matches the interrupt has
 been injected. Through this, we can avoid reading the RTE there.

Do you think the above changes would be a clean solution or you have
some different suggestion on how to fix it now.

Thanks
Chao

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel