[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v3] xen, input: add xen-kbdfront module parameter for setting resolution



Add a parameter for setting the resolution of xen-kbdfront in order to
be able to cope with a (virtual) frame buffer of arbitrary resolution.

While at it remove the pointless second reading of parameters from
Xenstore in the device connection phase: all parameters are available
during device probing already and that is where they should be read.

Signed-off-by: Juergen Gross <jgross@xxxxxxxx>
---
V3: - merged the two patches
    - read Xenstore parameters during probing of the device only
---
 drivers/input/misc/xen-kbdfront.c | 39 ++++++++++++++-------------------------
 1 file changed, 14 insertions(+), 25 deletions(-)

diff --git a/drivers/input/misc/xen-kbdfront.c 
b/drivers/input/misc/xen-kbdfront.c
index 3900875dec10..2fc7895373ab 100644
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -41,6 +41,12 @@ struct xenkbd_info {
        char phys[32];
 };
 
+enum { KPARAM_X, KPARAM_Y, KPARAM_CNT };
+static int ptr_size[KPARAM_CNT] = { XENFB_WIDTH, XENFB_HEIGHT };
+module_param_array(ptr_size, int, NULL, 0444);
+MODULE_PARM_DESC(ptr_size,
+       "Pointing device width, height in pixels (default 800,600)");
+
 static int xenkbd_remove(struct xenbus_device *);
 static int xenkbd_connect_backend(struct xenbus_device *, struct xenkbd_info 
*);
 static void xenkbd_disconnect_backend(struct xenkbd_info *);
@@ -128,7 +134,12 @@ static int xenkbd_probe(struct xenbus_device *dev,
        if (!info->page)
                goto error_nomem;
 
+       /* Set input abs params to match backend screen res */
        abs = xenbus_read_unsigned(dev->otherend, "feature-abs-pointer", 0);
+       ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend, "width",
+                                                 ptr_size[KPARAM_X]);
+       ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend, "height",
+                                                 ptr_size[KPARAM_Y]);
        if (abs) {
                ret = xenbus_write(XBT_NIL, dev->nodename,
                                   "request-abs-pointer", "1");
@@ -174,8 +185,8 @@ static int xenkbd_probe(struct xenbus_device *dev,
 
        if (abs) {
                __set_bit(EV_ABS, ptr->evbit);
-               input_set_abs_params(ptr, ABS_X, 0, XENFB_WIDTH, 0, 0);
-               input_set_abs_params(ptr, ABS_Y, 0, XENFB_HEIGHT, 0, 0);
+               input_set_abs_params(ptr, ABS_X, 0, ptr_size[KPARAM_X], 0, 0);
+               input_set_abs_params(ptr, ABS_Y, 0, ptr_size[KPARAM_Y], 0, 0);
        } else {
                input_set_capability(ptr, EV_REL, REL_X);
                input_set_capability(ptr, EV_REL, REL_Y);
@@ -309,9 +320,6 @@ static void xenkbd_disconnect_backend(struct xenkbd_info 
*info)
 static void xenkbd_backend_changed(struct xenbus_device *dev,
                                   enum xenbus_state backend_state)
 {
-       struct xenkbd_info *info = dev_get_drvdata(&dev->dev);
-       int ret, val;
-
        switch (backend_state) {
        case XenbusStateInitialising:
        case XenbusStateInitialised:
@@ -321,15 +329,6 @@ static void xenkbd_backend_changed(struct xenbus_device 
*dev,
                break;
 
        case XenbusStateInitWait:
-InitWait:
-               if (xenbus_read_unsigned(info->xbdev->otherend,
-                                        "feature-abs-pointer", 0)) {
-                       ret = xenbus_write(XBT_NIL, info->xbdev->nodename,
-                                          "request-abs-pointer", "1");
-                       if (ret)
-                               pr_warning("xenkbd: can't request abs-pointer");
-               }
-
                xenbus_switch_state(dev, XenbusStateConnected);
                break;
 
@@ -340,17 +339,7 @@ static void xenkbd_backend_changed(struct xenbus_device 
*dev,
                 * get Connected twice here.
                 */
                if (dev->state != XenbusStateConnected)
-                       goto InitWait; /* no InitWait seen yet, fudge it */
-
-               /* Set input abs params to match backend screen res */
-               if (xenbus_scanf(XBT_NIL, info->xbdev->otherend,
-                                "width", "%d", &val) > 0)
-                       input_set_abs_params(info->ptr, ABS_X, 0, val, 0, 0);
-
-               if (xenbus_scanf(XBT_NIL, info->xbdev->otherend,
-                                "height", "%d", &val) > 0)
-                       input_set_abs_params(info->ptr, ABS_Y, 0, val, 0, 0);
-
+                       xenbus_switch_state(dev, XenbusStateConnected);
                break;
 
        case XenbusStateClosed:
-- 
2.12.0


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.