[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH] hvmloader, libxl: use the correct ACPI settings depending on device model
> -----Original Message----- > From: Xen-devel [mailto:xen-devel-bounces@xxxxxxxxxxxxx] On Behalf Of > Igor Druzhinin > Sent: 19 July 2017 22:20 > To: xen-devel@xxxxxxxxxxxxx > Cc: Igor Druzhinin <igor.druzhinin@xxxxxxxxxx>; Ian Jackson > <Ian.Jackson@xxxxxxxxxx>; Wei Liu <wei.liu2@xxxxxxxxxx>; > jbeulich@xxxxxxxx; Andrew Cooper <Andrew.Cooper3@xxxxxxxxxx> > Subject: [Xen-devel] [PATCH] hvmloader, libxl: use the correct ACPI settings > depending on device model > > We need to choose ACPI tables and ACPI IO port location > properly depending on the device model version we are running. > Previously, this decision was made by BIOS type specific > code in hvmloader, e.g. always load QEMU traditional specific > tables if it's ROMBIOS and always load QEMU Xen specific > tables if it's SeaBIOS. > > This change saves this behavior but adds an additional way > (xenstore key) to specify the correct device model if we > happen to run a non-default one. Toolstack bit makes use of it. > > Signed-off-by: Igor Druzhinin <igor.druzhinin@xxxxxxxxxx> Reviewed-by: Paul Durrant <paul.durrant@xxxxxxxxxx> > --- > tools/firmware/hvmloader/hvmloader.c | 2 -- > tools/firmware/hvmloader/ovmf.c | 2 ++ > tools/firmware/hvmloader/rombios.c | 2 ++ > tools/firmware/hvmloader/seabios.c | 3 +++ > tools/firmware/hvmloader/util.c | 24 ++++++++++++++++++++++++ > tools/libxl/libxl_create.c | 2 ++ > 6 files changed, 33 insertions(+), 2 deletions(-) > > diff --git a/tools/firmware/hvmloader/hvmloader.c > b/tools/firmware/hvmloader/hvmloader.c > index f603f68..db11ab1 100644 > --- a/tools/firmware/hvmloader/hvmloader.c > +++ b/tools/firmware/hvmloader/hvmloader.c > @@ -405,8 +405,6 @@ int main(void) > } > > acpi_enable_sci(); > - > - hvm_param_set(HVM_PARAM_ACPI_IOPORTS_LOCATION, 1); > } > > init_vm86_tss(); > diff --git a/tools/firmware/hvmloader/ovmf.c > b/tools/firmware/hvmloader/ovmf.c > index 4ff7f1d..ebadc64 100644 > --- a/tools/firmware/hvmloader/ovmf.c > +++ b/tools/firmware/hvmloader/ovmf.c > @@ -127,6 +127,8 @@ static void ovmf_acpi_build_tables(void) > .dsdt_15cpu_len = 0 > }; > > + hvm_param_set(HVM_PARAM_ACPI_IOPORTS_LOCATION, 1); > + > hvmloader_acpi_build_tables(&config, ACPI_PHYSICAL_ADDRESS); > } > > diff --git a/tools/firmware/hvmloader/rombios.c > b/tools/firmware/hvmloader/rombios.c > index 56b39b7..31a7c65 100644 > --- a/tools/firmware/hvmloader/rombios.c > +++ b/tools/firmware/hvmloader/rombios.c > @@ -181,6 +181,8 @@ static void rombios_acpi_build_tables(void) > .dsdt_15cpu_len = dsdt_15cpu_len, > }; > > + hvm_param_set(HVM_PARAM_ACPI_IOPORTS_LOCATION, 0); > + > hvmloader_acpi_build_tables(&config, ACPI_PHYSICAL_ADDRESS); > } > > diff --git a/tools/firmware/hvmloader/seabios.c > b/tools/firmware/hvmloader/seabios.c > index 870576a..5878eff 100644 > --- a/tools/firmware/hvmloader/seabios.c > +++ b/tools/firmware/hvmloader/seabios.c > @@ -28,6 +28,7 @@ > > #include <acpi2_0.h> > #include <libacpi.h> > +#include <xen/hvm/params.h> > > extern unsigned char dsdt_anycpu_qemu_xen[]; > extern int dsdt_anycpu_qemu_xen_len; > @@ -99,6 +100,8 @@ static void seabios_acpi_build_tables(void) > .dsdt_15cpu_len = 0, > }; > > + hvm_param_set(HVM_PARAM_ACPI_IOPORTS_LOCATION, 1); > + > hvmloader_acpi_build_tables(&config, rsdp); > add_table(rsdp); > } > diff --git a/tools/firmware/hvmloader/util.c > b/tools/firmware/hvmloader/util.c > index db5f240..45b777c 100644 > --- a/tools/firmware/hvmloader/util.c > +++ b/tools/firmware/hvmloader/util.c > @@ -31,6 +31,9 @@ > #include <xen/hvm/hvm_xs_strings.h> > #include <xen/hvm/params.h> > > +extern unsigned char dsdt_anycpu_qemu_xen[], dsdt_anycpu[], > dsdt_15cpu[]; > +extern int dsdt_anycpu_qemu_xen_len, dsdt_anycpu_len, > dsdt_15cpu_len; > + > /* > * Check whether there exists overlap in the specified memory range. > * Returns true if exists, else returns false. > @@ -897,6 +900,27 @@ void hvmloader_acpi_build_tables(struct acpi_config > *config, > /* Allocate and initialise the acpi info area. */ > mem_hole_populate_ram(ACPI_INFO_PHYSICAL_ADDRESS >> > PAGE_SHIFT, 1); > > + /* If the device model is specified switch to the corresponding tables */ > + s = xenstore_read("platform/device-model", ""); > + if ( !strncmp(s, "qemu_xen_traditional", 21) ) > + { > + config->dsdt_anycpu = dsdt_anycpu; > + config->dsdt_anycpu_len = dsdt_anycpu_len; > + config->dsdt_15cpu = dsdt_15cpu; > + config->dsdt_15cpu_len = dsdt_15cpu_len; > + > + hvm_param_set(HVM_PARAM_ACPI_IOPORTS_LOCATION, 0); > + } > + else if ( !strncmp(s, "qemu_xen", 10) ) > + { > + config->dsdt_anycpu = dsdt_anycpu_qemu_xen; > + config->dsdt_anycpu_len = dsdt_anycpu_qemu_xen_len; > + config->dsdt_15cpu = NULL; > + config->dsdt_15cpu_len = 0; > + > + hvm_param_set(HVM_PARAM_ACPI_IOPORTS_LOCATION, 1); > + } > + > config->lapic_base_address = LAPIC_BASE_ADDRESS; > config->lapic_id = acpi_lapic_id; > config->ioapic_base_address = ioapic_base_address; > diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c > index 1158303..8dc8186 100644 > --- a/tools/libxl/libxl_create.c > +++ b/tools/libxl/libxl_create.c > @@ -472,6 +472,8 @@ int libxl__domain_build(libxl__gc *gc, > info->u.hvm.mmio_hole_memkb << 10); > } > } > + localents[i++] = "platform/device-model"; > + localents[i++] = (char *) libxl_device_model_version_to_string(info- > >device_model_version); > > break; > case LIBXL_DOMAIN_TYPE_PV: > -- > 2.7.4 > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@xxxxxxxxxxxxx > https://lists.xen.org/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx https://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |