[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [RFC QEMU PATCH v3 00/10] Implement vNVDIMM for Xen HVM guest



On 09/11/17 11:52 -0700, Stefano Stabellini wrote:
> CC'ing xen-devel, and the Xen tools and x86 maintainers.
> 
> On Mon, 11 Sep 2017, Igor Mammedov wrote:
> > On Mon, 11 Sep 2017 12:41:47 +0800
> > Haozhong Zhang <haozhong.zhang@xxxxxxxxx> wrote:
> > 
> > > This is the QEMU part patches that works with the associated Xen
> > > patches to enable vNVDIMM support for Xen HVM domains. Xen relies on
> > > QEMU to build guest NFIT and NVDIMM namespace devices, and allocate
> > > guest address space for vNVDIMM devices.
> > > 
> > > All patches can be found at
> > >   Xen:  https://github.com/hzzhan9/xen.git nvdimm-rfc-v3
> > >   QEMU: https://github.com/hzzhan9/qemu.git xen-nvdimm-rfc-v3
> > > 
> > > Patch 1 is to avoid dereferencing the NULL pointer to non-existing
> > > label data, as the Xen side support for labels is not implemented yet.
> > > 
> > > Patch 2 & 3 add a memory backend dedicated for Xen usage and a hotplug
> > > memory region for Xen guest, in order to make the existing nvdimm
> > > device plugging path work on Xen.
> > > 
> > > Patch 4 - 10 build and cooy NFIT from QEMU to Xen guest, when QEMU is
> > > used as the Xen device model.
> > 
> > I've skimmed over patch-set and can't say that I'm happy with
> > number of xen_enabled() invariants it introduced as well as
> > with partial blobs it creates.
> 
> I have not read the series (Haozhong, please CC me, Anthony and
> xen-devel to the whole series next time), but yes, indeed. Let's not add
> more xen_enabled() if possible.
> 
> Haozhong, was there a design document thread on xen-devel about this? If
> so, did it reach a conclusion? Was the design accepted? If so, please
> add a link to the design doc in the introductory email, so that
> everybody can read it and be on the same page.

Yes, there is a design [1] discussed and reviewed. Section 4.3 discussed
the guest ACPI.

[1] https://lists.xenproject.org/archives/html/xen-devel/2016-07/msg01921.html

> 
> 
> > I'd like to reduce above and a way to do this might be making xen 
> >  1. use fw_cfg
> >  2. fetch QEMU build acpi tables from fw_cfg
> >  3. extract nvdim tables (which is trivial) and use them
> > 
> > looking at xen_load_linux(), it seems possible to use fw_cfg.
> > 
> > So what's stopping xen from using it elsewhere?,
> > instead of adding more xen specific code to do 'the same'
> > job and not reusing/sharing common code with tcg/kvm.
> 
> So far, ACPI tables have not been generated by QEMU. Xen HVM machines
> rely on a firmware-like application called "hvmloader" that runs in
> guest context and generates the ACPI tables. I have no opinions on
> hvmloader and I'll let the Xen maintainers talk about it. However, keep
> in mind that with an HVM guest some devices are emulated by Xen and/or
> by other device emulators that can run alongside QEMU. QEMU doesn't have
> a full few of the system.
> 
> Here the question is: does it have to be QEMU the one to generate the
> ACPI blobs for the nvdimm? It would be nicer if it was up to hvmloader
> like the rest, instead of introducing this split-brain design about
> ACPI. We need to see a design doc to fully understand this.
>

hvmloader runs in the guest and is responsible to build/load guest
ACPI. However, it's not capable to build AML at runtime (for the lack
of AML builder). If any guest ACPI object is needed (e.g. by guest
DSDT), it has to be generated from ASL by iasl at Xen compile time and
then be loaded by hvmloader at runtime.

Xen includes an OperationRegion "BIOS" in the static generated guest
DSDT, whose address is hardcoded and which contains a list of values
filled by hvmloader at runtime. Other ACPI objects can refer to those
values (e.g., the number of vCPUs). But it's not enough for generating
guest NVDIMM ACPI objects at compile time and then being customized
and loaded by hvmload, because its structure (i.e., the number of
namespace devices) cannot be decided util the guest config is known.

Alternatively, we may introduce an AML builder in hvmloader and build
all guest ACPI completely in hvmloader. Looking at the similar
implementation in QEMU, it would not be small, compared to the current
size of hvmloader. Besides, I'm still going to let QEMU handle guest
NVDIMM _DSM and _FIT calls, which is another reason I use QEMU to
build NVDIMM ACPI.

> If the design doc thread led into thinking that it has to be QEMU to
> generate them, then would it make the code nicer if we used fw_cfg to
> get the (full or partial) tables from QEMU, as Igor suggested?

I'll have a look at the code (which I didn't notice) pointed by Igor.

One possible issue to use fw_cfg is how to avoid the conflict between
ACPI built by QEMU and ACPI built by hvmloader (e.g., both may use the
same table signature / device names / ...). In my current design, QEMU
will pass the table signatures and device names used in its ACPI to
Xen, and Xen can check the conflict with its own ACPI. Perhaps we can
add necessary functions in fw_cfg as well. Anyway, let me first look
at the code.

Thanks,
Haozhong

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.