[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xen-devel] [RFC v2 5/7] acpi:arm64: Add support for parsing IORT table
- To: "Goel, Sameer" <sgoel@xxxxxxxxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxxx, julien.grall@xxxxxxx
- From: Manish Jaggi <mjaggi@xxxxxxxxxxxxxxxxxx>
- Date: Fri, 20 Oct 2017 11:55:13 +0530
- Cc: sstabellini@xxxxxxxxxx, wei.liu2@xxxxxxxxxx, george.dunlap@xxxxxxxxxxxxx, Andrew.Cooper3@xxxxxxxxxx, jbeulich@xxxxxxxx, Ian.Jackson@xxxxxxxxxx, nd@xxxxxxx, robin.murphy@xxxxxxx, shankerd@xxxxxxxxxxxxxx
- Delivery-date: Fri, 20 Oct 2017 06:25:37 +0000
- List-id: Xen developer discussion <xen-devel.lists.xen.org>
- Spamdiagnosticmetadata: NSPM
- Spamdiagnosticoutput: 1:99
On 10/19/2017 8:30 PM, Goel, Sameer wrote:
On 10/10/2017 6:36 AM, Manish Jaggi wrote:
Hi Sameer,
On 9/21/2017 6:07 AM, Sameer Goel wrote:
Add support for parsing IORT table to initialize SMMU devices.
* The code for creating an SMMU device has been modified, so that the SMMU
device can be initialized.
* The NAMED NODE code has been commented out as this will need DOM0 kernel
support.
* ITS code has been included but it has not been tested.
Could you please refactor this patch into another set of two patches.
I am planning to rebase my IORT for Dom0 Hiding patch rework on this patch.
I will try to break this up. Lets discuss this a bit more next week.
Please have a look at the draft design. [1]
[1] https://www.mail-archive.com/xen-devel@xxxxxxxxxxxxx/msg125951.html
Thanks,
Manish
Signed-off-by: Sameer Goel <sgoel@xxxxxxxxxxxxxx>
---
xen/arch/arm/setup.c | 3 +
xen/drivers/acpi/Makefile | 1 +
xen/drivers/acpi/arm/Makefile | 1 +
xen/drivers/acpi/arm/iort.c | 173
+++++++++++++++++++++----------------
xen/drivers/passthrough/arm/smmu.c | 1 +
xen/include/acpi/acpi_iort.h | 17 ++--
xen/include/asm-arm/device.h | 2 +
xen/include/xen/acpi.h | 21 +++++
xen/include/xen/pci.h | 8 ++
9 files changed, 146 insertions(+), 81 deletions(-)
create mode 100644 xen/drivers/acpi/arm/Makefile
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index 92f173b..4ba09b2 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -49,6 +49,7 @@
#include <asm/setup.h>
#include <xsm/xsm.h>
#include <asm/acpi.h>
+#include <acpi/acpi_iort.h>
struct bootinfo __initdata bootinfo;
@@ -796,6 +797,8 @@ void __init start_xen(unsigned long boot_phys_offset,
tasklet_subsys_init();
+ /* Parse the ACPI iort data */
+ acpi_iort_init();
xsm_dt_init();
diff --git a/xen/drivers/acpi/Makefile b/xen/drivers/acpi/Makefile
index 444b11d..e7ffd82 100644
--- a/xen/drivers/acpi/Makefile
+++ b/xen/drivers/acpi/Makefile
@@ -1,5 +1,6 @@
subdir-y += tables
subdir-y += utilities
+subdir-$(CONFIG_ARM) += arm
subdir-$(CONFIG_X86) += apei
obj-bin-y += tables.init.o
diff --git a/xen/drivers/acpi/arm/Makefile b/xen/drivers/acpi/arm/Makefile
new file mode 100644
index 0000000..7c039bb
--- /dev/null
+++ b/xen/drivers/acpi/arm/Makefile
@@ -0,0 +1 @@
+obj-y += iort.o
diff --git a/xen/drivers/acpi/arm/iort.c b/xen/drivers/acpi/arm/iort.c
index 2e368a6..7f54062 100644
--- a/xen/drivers/acpi/arm/iort.c
+++ b/xen/drivers/acpi/arm/iort.c
@@ -14,17 +14,47 @@
* This file implements early detection/parsing of I/O mapping
* reported to OS through firmware via I/O Remapping Table (IORT)
* IORT document number: ARM DEN 0049A
+ *
+ * Based on Linux drivers/acpi/arm64/iort.c
+ * => commit ca78d3173cff3503bcd15723b049757f75762d15
+ *
+ * Xen modification:
+ * Sameer Goel <sgoel@xxxxxxxxxxxxxx>
+ * Copyright (C) 2017, The Linux Foundation, All rights reserved.
+ *
*/
-#define pr_fmt(fmt) "ACPI: IORT: " fmt
-
-#include <linux/acpi_iort.h>
-#include <linux/iommu.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
+#include <xen/acpi.h>
+#include <acpi/acpi_iort.h>
+#include <xen/fwnode.h>
+#include <xen/iommu.h>
+#include <xen/lib.h>
+#include <xen/list.h>
+#include <xen/pci.h>
+
+#include <asm/device.h>
+
+/* Xen: Define compatibility functions */
+#define FW_BUG "[Firmware Bug]: "
+#define pr_err(fmt, ...) printk(XENLOG_ERR fmt, ## __VA_ARGS__)
+#define pr_warn(fmt, ...) printk(XENLOG_WARNING fmt, ## __VA_ARGS__)
+
+/* Alias to Xen allocation helpers */
+#define kfree xfree
+#define kmalloc(size, flags) _xmalloc(size, sizeof(void *))
+#define kzalloc(size, flags) _xzalloc(size, sizeof(void *))
+
+/* Redefine WARN macros */
+#undef WARN
+#undef WARN_ON
+#define WARN(condition, format...) ({ \
+ int __ret_warn_on = !!(condition); \
+ if (unlikely(__ret_warn_on)) \
+ printk(format); \
+ unlikely(__ret_warn_on); \
+})
+#define WARN_TAINT(cond, taint, format...) WARN(cond, format)
+#define WARN_ON(cond) (!!cond)
#define IORT_TYPE_MASK(type) (1 << (type))
#define IORT_MSI_TYPE (1 << ACPI_IORT_NODE_ITS_GROUP)
@@ -256,6 +286,13 @@ static acpi_status iort_match_node_callback(struct
acpi_iort_node *node,
acpi_status status;
if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) {
+ status = AE_NOT_IMPLEMENTED;
+/*
+ * We need the namespace object name from dsdt to match the iort node, this
+ * will need additions to the kernel xen bus notifiers.
+ * So, disabling the named node code till a proposal is approved.
+ */
+#if 0
struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
struct acpi_iort_named_component *ncomp;
@@ -275,11 +312,12 @@ static acpi_status iort_match_node_callback(struct
acpi_iort_node *node,
status = !strcmp(ncomp->device_name, buf.pointer) ?
AE_OK : AE_NOT_FOUND;
acpi_os_free(buf.pointer);
+#endif
} else if (node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
struct acpi_iort_root_complex *pci_rc;
- struct pci_bus *bus;
+ struct pci_dev *pci_dev;
- bus = to_pci_bus(dev);
+ pci_dev = to_pci_dev(dev);
pci_rc = (struct acpi_iort_root_complex *)node->node_data;
/*
@@ -287,12 +325,11 @@ static acpi_status iort_match_node_callback(struct
acpi_iort_node *node,
* with root complexes. Each segment number can represent only
* one root complex.
*/
- status = pci_rc->pci_segment_number == pci_domain_nr(bus) ?
+ status = pci_rc->pci_segment_number == pci_domain_nr(pci_dev) ?
AE_OK : AE_NOT_FOUND;
} else {
status = AE_NOT_FOUND;
}
-out:
return status;
}
@@ -320,6 +357,11 @@ static int iort_id_map(struct acpi_iort_id_mapping
*map, u8 type, u32 rid_in,
return 0;
}
+/*
+ * Named components are not supported yet so we do not need the
+ * iort_node_get_id function
+ */
+#if 0
static
struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node,
u32 *id_out, u8 type_mask,
@@ -358,6 +400,7 @@ struct acpi_iort_node *iort_node_get_id(struct
acpi_iort_node *node,
return NULL;
}
+#endif
static struct acpi_iort_node *iort_node_map_rid(struct acpi_iort_node
*node,
u32 rid_in, u32 *rid_out,
@@ -410,6 +453,10 @@ fail_map:
return NULL;
}
+/* Xen: Comment out the NamedComponent and ITS mapping code till the support
+ * is available.
+ */
+#if 0
static struct acpi_iort_node *iort_find_dev_node(struct device *dev)
{
struct pci_bus *pbus;
@@ -481,7 +528,7 @@ static int iort_dev_find_its_id(struct device *dev, u32
req_id,
return 0;
}
-/**
+/*
* iort_get_device_domain() - Find MSI domain related to a device
* @dev: The device.
* @req_id: Requester ID for the device.
@@ -510,7 +557,7 @@ static int __get_pci_rid(struct pci_dev *pdev, u16 alias,
void *data)
*rid = alias;
return 0;
}
-
+#endif
static int arm_smmu_iort_xlate(struct device *dev, u32 streamid,
struct fwnode_handle *fwnode,
const struct iommu_ops *ops)
@@ -546,6 +593,7 @@ static const struct iommu_ops *iort_iommu_xlate(struct
device *dev,
return ret ? NULL : ops;
}
+#if 0 /* Xen: We do not need this function for Xen */
/**
* iort_set_dma_mask - Set-up dma mask for a device.
*
@@ -567,7 +615,7 @@ void iort_set_dma_mask(struct device *dev)
if (!dev->dma_mask)
dev->dma_mask = &dev->coherent_dma_mask;
}
-
+#endif
/**
* iort_iommu_configure - Set-up IOMMU configuration for a device.
*
@@ -583,14 +631,13 @@ const struct iommu_ops *iort_iommu_configure(struct
device *dev)
u32 streamid = 0;
if (dev_is_pci(dev)) {
- struct pci_bus *bus = to_pci_dev(dev)->bus;
+ struct pci_dev *pci_device = to_pci_dev(dev);
u32 rid;
- pci_for_each_dma_alias(to_pci_dev(dev), __get_pci_rid,
- &rid);
+ rid = PCI_BDF2(pci_device->bus, pci_device->devfn);
node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
- iort_match_node_callback, &bus->dev);
+ iort_match_node_callback, dev);
if (!node)
return NULL;
@@ -600,6 +647,13 @@ const struct iommu_ops *iort_iommu_configure(struct
device *dev)
ops = iort_iommu_xlate(dev, parent, streamid);
} else {
+ return NULL;
+/*
+ * We need the namespace object name from dsdt to match the iort node, this
+ * will need additions to the kernel xen bus notifiers.
+ * So, disabling the named node code till a proposal is approved.
+ */
+#if 0
int i = 0;
node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
@@ -616,11 +670,17 @@ const struct iommu_ops *iort_iommu_configure(struct
device *dev)
parent = iort_node_get_id(node, &streamid,
IORT_IOMMU_TYPE, i++);
}
+#endif
}
return ops;
}
+/*
+ * Xen: Not using the parsing ops for now. Need to check and see if it will
+ * be useful to use these in some form, or let the driver parse IORT node.
+ */
+#if 0
static void __init acpi_iort_register_irq(int hwirq, const char *name,
int trigger,
struct resource *res)
@@ -807,7 +867,7 @@ const struct iort_iommu_config *iort_get_iommu_cfg(struct
acpi_iort_node *node)
return NULL;
}
}
-
+#endif
/**
* iort_add_smmu_platform_device() - Allocate a platform device for SMMU
* @node: Pointer to SMMU ACPI IORT node
@@ -817,78 +877,42 @@ const struct iort_iommu_config *iort_get_iommu_cfg(struct
acpi_iort_node *node)
static int __init iort_add_smmu_platform_device(struct acpi_iort_node *node)
{
struct fwnode_handle *fwnode;
- struct platform_device *pdev;
- struct resource *r;
- enum dev_dma_attr attr;
- int ret, count;
- const struct iort_iommu_config *ops = iort_get_iommu_cfg(node);
-
- if (!ops)
- return -ENODEV;
-
- pdev = platform_device_alloc(ops->name, PLATFORM_DEVID_AUTO);
- if (!pdev)
- return -ENOMEM;
-
- count = ops->iommu_count_resources(node);
-
- r = kcalloc(count, sizeof(*r), GFP_KERNEL);
- if (!r) {
- ret = -ENOMEM;
- goto dev_put;
- }
-
- ops->iommu_init_resources(r, node);
+ struct device *dev;
+ int ret;
- ret = platform_device_add_resources(pdev, r, count);
/*
- * Resources are duplicated in platform_device_add_resources,
- * free their allocated memory
+ * Not enabling the parsing ops for now. The corresponding driver
+ * can parse this information as needed, so deleting relevant code as
+ * compared to base revision.
*/
- kfree(r);
- if (ret)
- goto dev_put;
+ dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
/*
* Add a copy of IORT node pointer to platform_data to
* be used to retrieve IORT data information.
*/
- ret = platform_device_add_data(pdev, &node, sizeof(node));
- if (ret)
- goto dev_put;
-
- /*
- * We expect the dma masks to be equivalent for
- * all SMMUs set-ups
- */
- pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ dev->type = DEV_ACPI;
+ dev->acpi_node = node;
fwnode = iort_get_fwnode(node);
if (!fwnode) {
ret = -ENODEV;
- goto dev_put;
+ goto error;
}
- pdev->dev.fwnode = fwnode;
-
- attr = ops->iommu_is_coherent(node) ?
- DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT;
-
- /* Configure DMA for the page table walker */
- acpi_dma_configure(&pdev->dev, attr);
+ dev->fwnode = fwnode;
- ret = platform_device_add(pdev);
- if (ret)
- goto dma_deconfigure;
+ /* Call the acpi init functions for IOMMU devices */
+ ret = acpi_device_init(DEVICE_IOMMU, (void *)dev, node->type);
return 0;
-dma_deconfigure:
- acpi_dma_deconfigure(&pdev->dev);
-dev_put:
- platform_device_put(pdev);
+error:
+ kfree(dev);
return ret;
}
@@ -957,5 +981,6 @@ void __init acpi_iort_init(void)
iort_init_platform_devices();
- acpi_probe_device_table(iort);
+ /* Xen; Do not need a device table probe */
+ /* acpi_probe_device_table(iort);*/
}
diff --git a/xen/drivers/passthrough/arm/smmu.c
b/xen/drivers/passthrough/arm/smmu.c
index 362d578..ad956d5 100644
--- a/xen/drivers/passthrough/arm/smmu.c
+++ b/xen/drivers/passthrough/arm/smmu.c
@@ -181,6 +181,7 @@ static void __iomem *devm_ioremap_resource(struct device
*dev,
* Xen: PCI functions
* TODO: It should be implemented when PCI will be supported
*/
+#undef to_pci_dev
#define to_pci_dev(dev) (NULL)
static inline int pci_for_each_dma_alias(struct pci_dev *pdev,
int (*fn) (struct pci_dev *pdev,
diff --git a/xen/include/acpi/acpi_iort.h b/xen/include/acpi/acpi_iort.h
index 77e0809..d4315a4 100644
--- a/xen/include/acpi/acpi_iort.h
+++ b/xen/include/acpi/acpi_iort.h
@@ -19,27 +19,32 @@
#ifndef __ACPI_IORT_H__
#define __ACPI_IORT_H__
-#include <linux/acpi.h>
-#include <linux/fwnode.h>
-#include <linux/irqdomain.h>
+#include <xen/acpi.h>
+#include <asm/device.h>
+/* Xen: Not using IORT IRQ bindings */
+#if 0
#define IORT_IRQ_MASK(irq) (irq & 0xffffffffULL)
#define IORT_IRQ_TRIGGER_MASK(irq) ((irq >> 32) & 0xffffffffULL)
int iort_register_domain_token(int trans_id, struct fwnode_handle
*fw_node);
void iort_deregister_domain_token(int trans_id);
struct fwnode_handle *iort_find_domain_token(int trans_id);
-#ifdef CONFIG_ACPI_IORT
+#endif
+#ifdef CONFIG_ARM_64
void acpi_iort_init(void);
bool iort_node_match(u8 type);
+#if 0
u32 iort_msi_map_rid(struct device *dev, u32 req_id);
struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id);
/* IOMMU interface */
void iort_set_dma_mask(struct device *dev);
+#endif
const struct iommu_ops *iort_iommu_configure(struct device *dev);
#else
static inline void acpi_iort_init(void) { }
static inline bool iort_node_match(u8 type) { return false; }
+#if 0
static inline u32 iort_msi_map_rid(struct device *dev, u32 req_id)
{ return req_id; }
static inline struct irq_domain *iort_get_device_domain(struct device *dev,
@@ -47,12 +52,10 @@ static inline struct irq_domain
*iort_get_device_domain(struct device *dev,
{ return NULL; }
/* IOMMU interface */
static inline void iort_set_dma_mask(struct device *dev) { }
+#endif
static inline
const struct iommu_ops *iort_iommu_configure(struct device *dev)
{ return NULL; }
#endif
-#define IORT_ACPI_DECLARE(name, table_id, fn) \
- ACPI_DECLARE_PROBE_ENTRY(iort, name, table_id, 0, NULL, 0, fn)
-
#endif /* __ACPI_IORT_H__ */
diff --git a/xen/include/asm-arm/device.h b/xen/include/asm-arm/device.h
index 5027c87..4eef9ce 100644
--- a/xen/include/asm-arm/device.h
+++ b/xen/include/asm-arm/device.h
@@ -7,6 +7,7 @@
enum device_type
{
DEV_DT,
+ DEV_ACPI,
};
struct dev_archdata {
@@ -20,6 +21,7 @@ struct device
#ifdef CONFIG_HAS_DEVICE_TREE
struct dt_device_node *of_node; /* Used by drivers imported from Linux */
#endif
+ void *acpi_node; /*Current use case is acpi_iort_node */
struct fwnode_handle *fwnode; /*fw device node identifier */
struct iommu_fwspec *iommu_fwspec;
struct dev_archdata archdata;
diff --git a/xen/include/xen/acpi.h b/xen/include/xen/acpi.h
index 9409350..2f6aae1 100644
--- a/xen/include/xen/acpi.h
+++ b/xen/include/xen/acpi.h
@@ -32,6 +32,7 @@
#include <acpi/acpi.h>
#include <asm/acpi.h>
+#include <xen/fwnode.h>
#define ACPI_MADT_GET_(fld, x) (((x) & ACPI_MADT_##fld##_MASK) / \
(ACPI_MADT_##fld##_MASK & -ACPI_MADT_##fld##_MASK))
@@ -49,6 +50,26 @@
(!(entry)) || (unsigned long)(entry) + sizeof(*(entry)) >
(end) || \
(entry)->header.length < sizeof(*(entry)))
+static inline struct fwnode_handle *acpi_alloc_fwnode_static(void)
+{
+ struct fwnode_handle *fwnode;
+
+ fwnode = xzalloc(struct fwnode_handle);
+ if (!fwnode)
+ return NULL;
+
+ fwnode->type = FWNODE_ACPI_STATIC;
+
+ return fwnode;
+}
+
+static inline void acpi_free_fwnode_static(struct fwnode_handle *fwnode)
+{
+ if (!fwnode || fwnode->type != FWNODE_ACPI_STATIC)
+ return;
+
+ xfree(fwnode);
+}
#ifdef CONFIG_ACPI
enum acpi_interrupt_id {
diff --git a/xen/include/xen/pci.h b/xen/include/xen/pci.h
index 43f2125..182b1a5 100644
--- a/xen/include/xen/pci.h
+++ b/xen/include/xen/pci.h
@@ -92,8 +92,16 @@ struct pci_dev {
#define PT_FAULT_THRESHOLD 10
} fault;
u64 vf_rlen[6];
+#ifdef CONFIG_ARM
+ struct device dev;
+#endif
};
+#ifdef CONFIG_ARM
+#define to_pci_dev(p) container_of(p, struct pci_dev,dev)
+#define pci_domain_nr(dev) dev->seg
+#endif
+
#define for_each_pdev(domain, pdev) \
list_for_each_entry(pdev, &(domain->arch.pdev_list), domain_list)
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
https://lists.xen.org/xen-devel
|
