On 29.11.17 at 20:44, <govinda.tatti@xxxxxxxxxx> wrote:
So, we will use the following sequence to reset the requested
device/function.
- FLR (as first option)
- BUS/SLOT reset (as fall-back option) if FLR is not supported or any
issue with FLR
It looks to me as if the slot reset could also fail despite the probe
having succeeded. In such a case it might be better to try a bus
reset, i.e. the sequence would become
- FLR
- slot reset if FLR failed
- bus reset if slot reset failed