|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [xen-unstable-smoke test] 117084: trouble: blocked/broken
flight 117084 xen-unstable-smoke real [real] http://logs.test-lab.xenproject.org/osstest/logs/117084/ Failures and problems with tests :-( Tests which did not succeed and are blocking, including tests which could not be run: build-amd64 <job status> broken test-arm64-arm64-xl-xsm <job status> broken build-armhf <job status> broken build-armhf 4 host-install(4) broken REGR. vs. 116956 build-amd64 4 host-install(4) broken REGR. vs. 116956 Tests which did not succeed, but are not blocking: build-amd64-libvirt 1 build-check(1) blocked n/a test-armhf-armhf-xl 1 build-check(1) blocked n/a test-amd64-amd64-libvirt 1 build-check(1) blocked n/a test-amd64-amd64-xl-qemuu-debianhvm-i386 1 build-check(1) blocked n/a test-arm64-arm64-xl-xsm 1 build-check(1) blocked n/a version targeted for testing: xen c6c2fc6e4919a1420096b94a4ba8682f20e92709 baseline version: xen 43550972395f9a3a48bb4086a0faf0f8d442e37d Last test of basis 116956 2017-12-07 23:02:27 Z 4 days Failing since 117015 2017-12-08 22:03:21 Z 3 days 11 attempts Testing same since 117084 2017-12-12 01:02:11 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Andre Przywara <andre.przywara@xxxxxxx> Andre Przywara <andre.przywara@xxxxxxxxxx> Julien Grall <julien.grall@xxxxxxx> Julien Grall <julien.grall@xxxxxxxxxx> Stefano Stabellini <sstabellini@xxxxxxxxxx> jobs: build-amd64 broken build-armhf broken build-amd64-libvirt blocked test-armhf-armhf-xl blocked test-arm64-arm64-xl-xsm broken test-amd64-amd64-xl-qemuu-debianhvm-i386 blocked test-amd64-amd64-libvirt blocked ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary broken-job build-amd64 broken broken-job test-arm64-arm64-xl-xsm broken broken-job build-armhf broken broken-step build-armhf host-install(4) broken-step build-amd64 host-install(4) Not pushing. ------------------------------------------------------------ commit c6c2fc6e4919a1420096b94a4ba8682f20e92709 Author: Julien Grall <julien.grall@xxxxxxxxxx> Date: Wed Nov 1 14:03:14 2017 +0000 xen/arm32: mm: Rework is_xen_heap_page to avoid nameclash The arm32 version of the function is_xen_heap_page currently define a variable _mfn. This will lead to a compiler when use typesafe MFN in a follow-up patch: called object '_mfn' is not a function or function pointer Fix it by renaming the local variable _mfn to mfn_. Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit 4da2ec1b1584975012ceda49160bd2f276076d5d Author: Julien Grall <julien.grall@xxxxxxxxxx> Date: Wed Nov 1 14:03:13 2017 +0000 xen/arm: domain_build: Clean-up insert_11_bank - Remove spurious () - Add missing spaces - Turn 1 << to 1UL << - Rename spfn to smfn and switch to mfn_t Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit 70f7b6ca0e8208034bdc91d20b2f311bbe63a0a9 Author: Andre Przywara <andre.przywara@xxxxxxxxxx> Date: Thu Dec 7 16:14:08 2017 +0000 ARM: VGIC: move gic_remove_irq_from_queues() gic_remove_irq_from_queues() was not only misnamed, it also has the wrong abstraction, as it should not live in gic.c. Move it into vgic.c and vgic.h, where it belongs to, and rename it on the way. Signed-off-by: Andre Przywara <andre.przywara@xxxxxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit 9630c5ae363b4cbf8eb61366530f40c80680af4d Author: Julien Grall <julien.grall@xxxxxxx> Date: Wed Dec 6 14:51:37 2017 +0000 xen/arm: gic-v3: Bail out if gicv3_cpu_init fail When system registers are not enabled, all the access to them will trap in EL2. In Xen, system registers will be enabled by gicv3_cpu_init only on success. As the rest of the code (e.g gicv3_hyp_init) relies on system register, it is better to bail out directly. This will save time on debugging early boot issue on GICv3 platform. Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit ac2d8d402370f6f93f82871f3b34ddb9a9ccae05 Author: Julien Grall <julien.grall@xxxxxxxxxx> Date: Wed Nov 29 17:46:35 2017 +0000 xen/arm: Surround HSR_SYSREG macro value with () The value of the macro HCR_SYSREG is not surrounded by (). This means the behavior may change depend on how it is used. Thanksfully recent GCC will issue a warning for that. Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit b819187a15ecea7fe00cffded1bf454b8a6d7dd2 Author: Andre Przywara <andre.przywara@xxxxxxx> Date: Thu Oct 19 13:48:37 2017 +0100 ARM: vGIC: fix nr_irq definition The global variable "nr_irqs" is used for x86 and some common Xen code. To make the latter work easily for ARM, it was #defined to NR_IRQS. This not only violated the common habit of capitalizing macros, but also caused issues if one wanted to use a rather innocent "nr_irqs" as a local variable name or as a function parameter. Drop the optimization and make nr_irqs a normal variable for ARM also. Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> commit 2e9b1c655f060b5c4e68bc8499f02253babe1bbc Author: Andre Przywara <andre.przywara@xxxxxxx> Date: Thu Oct 19 13:48:36 2017 +0100 ARM: remove unneeded gic.h inclusions gic.h is supposed to hold defines and prototypes for the hardware side of the GIC interrupt controller. A lot of parts in Xen should not be bothered with that, as they either only care about the VGIC or use more generic interfaces. Remove unneeded inclusions of gic.h from files where they are actually not needed. Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> commit c05aa4afac64ea687c1a2bf9277ba6552809495b Author: Julien Grall <julien.grall@xxxxxxxxxx> Date: Wed Nov 29 17:57:32 2017 +0000 xen/arm: bootfdt: Use proper default for #address-cells and #size-cells Per the device-tree specific [1], when the property #address-cells and #size-cells are not present, the default value should be resp. 1 and 2. [1] https://www.devicetree.org/downloads/devicetree-specification-v0.1-20160524.pdf Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx> Acked-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> (qemu changes not included) _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |