|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [libvirt test] 119237: regressions - FAIL
flight 119237 libvirt real [real] http://logs.test-lab.xenproject.org/osstest/logs/119237/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-armhf-armhf-libvirt-raw 11 guest-start fail REGR. vs. 119049 Tests which did not succeed, but are not blocking: test-armhf-armhf-libvirt-xsm 14 saverestore-support-check fail like 119049 test-armhf-armhf-libvirt 14 saverestore-support-check fail like 119049 test-amd64-amd64-libvirt-xsm 13 migrate-support-check fail never pass test-amd64-amd64-libvirt 13 migrate-support-check fail never pass test-amd64-i386-libvirt-xsm 13 migrate-support-check fail never pass test-amd64-i386-libvirt 13 migrate-support-check fail never pass test-arm64-arm64-libvirt 13 migrate-support-check fail never pass test-arm64-arm64-libvirt 14 saverestore-support-check fail never pass test-arm64-arm64-libvirt-xsm 13 migrate-support-check fail never pass test-arm64-arm64-libvirt-xsm 14 saverestore-support-check fail never pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass test-arm64-arm64-libvirt-qcow2 12 migrate-support-check fail never pass test-arm64-arm64-libvirt-qcow2 13 saverestore-support-check fail never pass test-amd64-amd64-libvirt-vhd 12 migrate-support-check fail never pass test-armhf-armhf-libvirt-xsm 13 migrate-support-check fail never pass test-armhf-armhf-libvirt 13 migrate-support-check fail never pass version targeted for testing: libvirt d70d07eef8001b55a5f6b18a2065da2b528d3679 baseline version: libvirt 554a5edcb46ff972fed45b851d70823b923fec6a Last test of basis 119049 2018-02-13 04:20:05 Z 3 days Failing since 119148 2018-02-14 04:23:35 Z 2 days 2 attempts Testing same since 119237 2018-02-15 04:25:30 Z 1 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Andrea Bolognani <abologna@xxxxxxxxxx> Bjoern Walk <bwalk@xxxxxxxxxxxxxxxxxx> Jiri Denemark <jdenemar@xxxxxxxxxx> Michal Privoznik <mprivozn@xxxxxxxxxx> Peter Krempa <pkrempa@xxxxxxxxxx> jobs: build-amd64-xsm pass build-arm64-xsm pass build-armhf-xsm pass build-i386-xsm pass build-amd64 pass build-arm64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-arm64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-arm64-pvops pass build-armhf-pvops pass build-i386-pvops pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-libvirt-xsm pass test-arm64-arm64-libvirt-xsm pass test-armhf-armhf-libvirt-xsm pass test-amd64-i386-libvirt-xsm pass test-amd64-amd64-libvirt pass test-arm64-arm64-libvirt pass test-armhf-armhf-libvirt pass test-amd64-i386-libvirt pass test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair pass test-arm64-arm64-libvirt-qcow2 pass test-armhf-armhf-libvirt-raw fail test-amd64-amd64-libvirt-vhd pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit d70d07eef8001b55a5f6b18a2065da2b528d3679 Author: Peter Krempa <pkrempa@xxxxxxxxxx> Date: Mon Feb 12 16:16:42 2018 +0100 virstoragetest: Add test case for NBD over unix socket with new syntax Use the new syntax which uses the 'UnixSocket' type in qemu. Signed-off-by: Peter Krempa <pkrempa@xxxxxxxxxx> commit a3a3de9bc74aea9f56790210948cdb7cf579d84c Author: Peter Krempa <pkrempa@xxxxxxxxxx> Date: Mon Feb 12 15:44:11 2018 +0100 storage: Fix formatting and parsing of qemu type 'UnixSocketAddress' The documentation for the JSON/qapi type 'UnixSocketAddress' states that the unix socket path field is named 'path'. Unfortunately qemu uses 'socket' in case of the gluster driver (despite documented otherwise). Add logic which will format the correct fields while keeping support of the old spelling. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1544325 Signed-off-by: Peter Krempa <pkrempa@xxxxxxxxxx> commit bc84bb9fe001fc3ca5436b9b50fbd669e4c489b6 Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Wed Feb 14 13:16:52 2018 +0100 spec: Drop overlapping triggers The postun trigger for libvirt-daemon was defined twice for overlapping ranges of package verions if systemd support was switched off (which happens when building on something ancient, such as RHEL-6). Let's combine the two triggers into the one which is called when libvirt-daemon < 1.3.0 is uninstalled. As a side effect, virtlockd and virtlogd might be reloaded twice after an upgrade from libvirt newer than 1.2.1 and older than 1.3.0 (by postun script from the old libvirt and postun trigger from the new libvirt). Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> Reviewed-by: Daniel P. Berrangé <berrange@xxxxxxxxxx> commit cf555f92128222f5a392cf80478c0a291bb1a0fe Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Wed Feb 14 12:09:32 2018 +0100 spec: Fix indentation in daemon's triggerpostun Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> Reviewed-by: Daniel P. Berrangé <berrange@xxxxxxxxxx> commit b2ab38bfdc765bbcb56b89b55dfee6b406fc8c29 Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Fri Feb 9 14:08:45 2018 +0100 spec: Prepare for future RHEL Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> Reviewed-by: Daniel P. Berrangé <berrange@xxxxxxxxxx> commit 259b5ca73c13d09b510475e1bb58d31d509193ba Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Fri Feb 9 14:02:00 2018 +0100 spec: Drop checks for old Fedora releases The oldest Fedora release supported by the spec file is 26. Checking for anything older makes no sense. Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> Reviewed-by: Daniel P. Berrangé <berrange@xxxxxxxxxx> commit 42188c1c65c34b8e77ad48f4dde8a5f06328f16a Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Wed Feb 14 14:49:28 2018 +0100 spec: Build virt-login-shell iff LXC driver is enabled Building virt-login-shell doesn't really make any sense without LXC and doing so even breaks "make rpm" since the associated files are installed but unpackaged (the login-shell sub package already depends on LXC). Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> Reviewed-by: Daniel P. Berrangé <berrange@xxxxxxxxxx> commit 34783a9e6b9c3d8850db878fc323c1ff40703ea6 Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Fri Feb 9 13:42:50 2018 +0100 spec: Enable fuse only if LXC is enabled Enabling fuse without LXC does not make a lot of sense because fuse is used only by LXC. Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> Reviewed-by: Daniel P. Berrangé <berrange@xxxxxxxxxx> commit b62b8090b2ad4524a5bf9d40d0d1c17a9d57f5a0 Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Tue Feb 6 10:21:56 2018 +0100 qemu: Check for down limit of SLIRP prefix too https://bugzilla.redhat.com/show_bug.cgi?id=1515533 We're already checking if IPv4 prefix isn't too long. But we are not checking if it isn't too short. QEMU supports prefixes longer than 4 (including). I haven't find anything similar related to IPv6 in qemu sources. Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 9cae9c822be1330fe5c6eec5c61be2be8b70ba64 Author: Peter Krempa <pkrempa@xxxxxxxxxx> Date: Mon Feb 12 15:50:12 2018 +0100 qemu: block: Remove misleading part of comment in qemuBlockStorageSourceBuildJSONSocketAddress The array indexes are formatted if the JSON->commandline translator is translating an array type. It does not at all depend on this function. Signed-off-by: Peter Krempa <pkrempa@xxxxxxxxxx> commit 6fc33b6f37af2310fd5bb1246e194eed96741df8 Author: Bjoern Walk <bwalk@xxxxxxxxxxxxxxxxxx> Date: Thu Feb 8 13:38:25 2018 +0100 tests: run virshtest independent of current pwd virshtest execves the virsh binary. Make sure that it finds the binary's location independent of the current working directory by specifying the absolute path as determined by the build environment. Reviewed-by: Marc Hartmayer <mhartmay@xxxxxxxxxxxxxxxxxx> Reviewed-by: Boris Fiuczynski <fiuczy@xxxxxxxxxxxxxxxxxx> Signed-off-by: Bjoern Walk <bwalk@xxxxxxxxxxxxxxxxxx> commit e6f36ae43544576353a8ab1168d749dcd11e7465 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Tue Jan 23 10:50:04 2018 +0100 tests: Clean up HPT tests Give them better names and remove some redundancy. Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 3dd1eb3b26504f91ec6c8487784c494718d884c1 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Tue Feb 6 14:49:41 2018 +0100 conf: Improve HPT feature handling Instead of storing separately whether the feature is enabled or not and what resizing policy should be used, store both of them in a single place. Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit c5a451ef21293468b64eb7929ada6b9406350bf5 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Tue Feb 6 14:30:40 2018 +0100 conf: Improve IOAPIC feature handling Instead of storing separately whether the feature is enabled or not and what driver should be used, store both of them in a single place. Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 132548efde76defaca54f90cc9c8a57508a4a86f Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Thu Feb 1 17:52:48 2018 +0100 qemu: Fix GIC behavior for the default case When no GIC version is specified, we currently default to GIC v2; however, that's not a great default, since guests will fail to start if the hardware only supports GIC v3. Change the behavior so that a sensible default is chosen instead. That basically means using the same algorithm whether the user didn't explicitly enable the GIC feature or they explicitly enabled it but didn't specify any GIC version. Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 7500533c5629c4864ae6cfa6672ff28f36e7010f Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Thu Feb 1 18:17:13 2018 +0100 tests: Improve GIC tests Account for the fact that the default might change based on what GIC versions are supported by QEMU. That's not the case at the moment, but it will be soon. Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit f3b4c98748458fe149ee3d4ad65528a0b3b278b0 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Fri Feb 2 15:55:14 2018 +0100 conf: Integrate all features ABI checks in the switch There are a few stray checks which still live outside of the switch in virDomainDefFeaturesCheckABIStability() for no good reason. Move them inside the switch, and update the error messages to be consistent while at it. Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 53072064745731e8c887f8ee71092060a4025c62 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Thu Feb 1 12:35:15 2018 +0100 conf: Validate VIR_DOMAIN_FEATURE_CAPABILITIES properly Unlike most other features, VIR_DOMAIN_FEATURE_CAPABILITIES is of type virDomainCapabilitiesPolicy instead of virTristateSwitch, so we need to handle it separately for the error message to make sense. Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit a975c95967e5da43c231601913ccb2077c8434b6 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Thu Feb 1 12:31:57 2018 +0100 conf: Use switch in virDomainDefFeaturesCheckABIStability() The compiler can make sure we are handling all features. Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit f55fcb7e8f997d0f15b344c8653725624c7b37ee Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Fri Feb 2 16:05:51 2018 +0100 qemu: Move GIC checks to qemuDomainDefValidateFeatures() Keep them along with other arch/machine type checks for features instead of waiting until command line generation time. Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit ce24802a6b1c86f13735ce9533acff15346138a3 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Fri Feb 2 16:05:01 2018 +0100 qemu: Use switch in qemuDomainDefValidateFeatures() The compiler can make sure we are handling all features. While reworking the logic, also change error messages to a more consistent style. Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 56ca68c3c8947fb37e97a131af7d0fcd1987e800 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Fri Feb 2 10:58:13 2018 +0100 qemu: Move feature verification from PostParse() to Validate() We want to perform all feature verification in a single spot, but some of it (eg. GIC) is currently being performed at command line generation time, and moving it to PostParse() would cause guests to disappear. Moving verification to Validate() allows us to side-step the issue. Signed-off-by: Andrea Bolognani <abologna@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |