[Xen-devel] [PATCH v2] x86/nmi: start NMI watchdog on CPU0 after SMP bootstrap

[Igor Druzhinin <igor.druzhinin@xxxxxxxxxx>]

We're noticing a reproducible system boot hang on certain
post-Skylake platforms where the BIOS is configured in
legacy boot mode with x2APIC disabled. The system stalls
immediately after writing the first SMP initialization
sequence into APIC ICR.

The cause of the problem is watchdog NMI handler execution -
somewhere near the end of NMI handling (after it's already
rescheduled the next NMI) it tries to access IO port 0x61
to get the actual NMI reason on CPU0. Unfortunately, this
port is emulated by BIOS using SMIs and this emulation for
some reason takes more time than we expect during INIT-SIPI-SIPI
sequence. As the result, the system is constantly moving between
NMI and SMI handler and not making any progress.

To avoid this, initialize the watchdog after SMP bootstrap on
CPU0 and, additionally, protect the NMI handler by moving
IO port access before NMI re-scheduling.

Signed-off-by: Igor Druzhinin <igor.druzhinin@xxxxxxxxxx>
---
 xen/arch/x86/apic.c    | 2 +-
 xen/arch/x86/smpboot.c | 3 +++
 xen/arch/x86/traps.c   | 9 +++++++--
 3 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/xen/arch/x86/apic.c b/xen/arch/x86/apic.c
index 5039173..ffa5a69 100644
--- a/xen/arch/x86/apic.c
+++ b/xen/arch/x86/apic.c
@@ -684,7 +684,7 @@ void setup_local_APIC(void)
         printk("Leaving ESR disabled.\n");
     }
 
-    if (nmi_watchdog == NMI_LOCAL_APIC)
+    if (nmi_watchdog == NMI_LOCAL_APIC && smp_processor_id())
         setup_apic_nmi_watchdog();
     apic_pm_activate();
 }
diff --git a/xen/arch/x86/smpboot.c b/xen/arch/x86/smpboot.c
index 2ebef03..1844116 100644
--- a/xen/arch/x86/smpboot.c
+++ b/xen/arch/x86/smpboot.c
@@ -1248,7 +1248,10 @@ int __cpu_up(unsigned int cpu)
 void __init smp_cpus_done(void)
 {
     if ( nmi_watchdog == NMI_LOCAL_APIC )
+    {
+        setup_apic_nmi_watchdog();
         check_nmi_watchdog();
+    }
 
     setup_ioapic_dest();
 
diff --git a/xen/arch/x86/traps.c b/xen/arch/x86/traps.c
index 2e022b0..c16f146 100644
--- a/xen/arch/x86/traps.c
+++ b/xen/arch/x86/traps.c
@@ -1706,7 +1706,7 @@ static nmi_callback_t *nmi_callback = dummy_nmi_callback;
 void do_nmi(const struct cpu_user_regs *regs)
 {
     unsigned int cpu = smp_processor_id();
-    unsigned char reason;
+    unsigned char reason = 0;
     bool handle_unknown = false;
 
     ++nmi_count(cpu);
@@ -1714,6 +1714,12 @@ void do_nmi(const struct cpu_user_regs *regs)
     if ( nmi_callback(regs, cpu) )
         return;
 
+    /* This IO port access is likely to produce SMI which, in turn,
+     * may take enough time for the next NMI tick to happen. To avoid having
+     * nested NMIs as the result let's call it before watchdog re-scheduling */
+    if ( cpu == 0 )
+        reason = inb(0x61);
+
     if ( (nmi_watchdog == NMI_NONE) ||
          (!nmi_watchdog_tick(regs) && watchdog_force) )
         handle_unknown = true;
@@ -1721,7 +1727,6 @@ void do_nmi(const struct cpu_user_regs *regs)
     /* Only the BSP gets external NMIs from the system. */
     if ( cpu == 0 )
     {
-        reason = inb(0x61);
         if ( reason & 0x80 )
             pci_serr_error(regs);
         if ( reason & 0x40 )
-- 
2.7.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-devel